Panasonic DP-C305 Service Manual page 894

Hide thumbs Also See for DP-C305:

Table of Contents

Network Firmware Update Tool (LAN)

The version check for the specified devices

starts automatically.

If 0 destinations fail the version check go to the

Click [Next>].

Note: If a timeout error occurs, please confirm

that the device is not currently in Service Mode

and also that the Device's IP address pings

successfully. You may need to go back and

change some of the settings within the tool

before proceeding with the update.

Verify that the information you want to update is

correct before proceeding.

Then click [Next>].

Note: If "Send at once" is checked, all firmware

will be sent at once, and then erase, write and

reboot are performed for the entire package.

If "Send at once" is unchecked, each firmware

(SC, PNL, SPC, etc.) is transmitted separately,

and each time the unit erases, writes and reboots

in the normal mode for each independent

This "Send at once", function cannot be used if

the model is DP-6010 / 4510 / 3510, firmware

type is PCL or PS, and the unit SC version is

Confirm the destination device(s) again.

Set timer communication if necessary, otherwise

leave unchecked.

Then click [Next>].

Show Quick Links

Table of Contents

Troubleshooting

Dp-c405 Dp-c265