9.9.2.
Installation
CAUTION!
Turn the Power Switch on the Left Side, and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
3.94 in
(100 mm)
55.48 in
(1410 mm)
70.59 in (1793 mm)
Ver. 1.1
3.94 in (100 mm)
3.94 in
(100 mm)
3.94 in
(100 mm)
683
Note:
Make sure that there will be adequate space for
working area (Ex: Loading paper, replacing
supplies, etc.).
(1) Connect the Optional LVPS Harness to
connector CN64 on the Optional LVPS.
(2) Remove 11 Screws.
(3) Remove the Rear Cover Assembly.
Caution:
If the LED on the SC PC Board is lit (ON), the
Power to the machine is still ON.
Please read the entire section "9.9.2. Installation"
once again.
DP-C405/C305/C265
FEB 2008