Stapler Movement Controller; Front 1-Point Stapling; Rear 1-Point Stapling - Panasonic DP-C305 Service Manual
Hide thumbs
Also See for DP-C305:
- Operating instructions manual (112 pages) ,
- Scan/email manual (62 pages) ,
- Service handbook (808 pages)
Table of Contents
Advertisement
1. Stapler Movement Controller
The Stapler Unit is moved by the Slide Motor (M8). Its home position is detected by the Slide Home
Position Sensor (PI18). The Stapler waits at the back irrespective of the staple mode and paper size.
After paper has been stacked on the Processing Tray, the Stapler is moved to the specified stapling
position in response to the stapling command from the Host Machine.
Fig. 2-030 shows the standby position of the Stapler and the stapling position depending on the staple
mode.
a. Front 1-Point Stapling
The Stapler waits at the back. The Stapler moves to and returns from the stapling position for each
stapling operation.
b. Rear 1-Point Stapling
The Stapler waits at the back. The stapling position is the same as the standby position.
Ver. 1.1
Feed direction
Fig. 2-030
Feed direction
Fig. 2-031
Standby position
Stapler
Stopper
Stapling position
Standby position
Stapling position
Stapler
Stopper
783
DP-C405/C305/C265
FEB 2008
- Quick Links:
- Error Codes (for Copier)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
