Ver. 1.1
(8) Disconnect 3 Harnesses on the ADU PC Board
(CN403, CN404, CN405)
(9) Release 3 Harnesses from the Edge Saddle.
(10) Remove the Lower Dumper Bracket (2114).
(11) Remove the Dumper (2116).
(12) Open the Lower Right Side Cover.
(13) Remove 1 Snap Ring (G6).
(14) Remove the Hinge Pin (2103).
Note:
When installing the Hinge Pin, take care not to
hold it by its side.
105
DP-C405/C305/C265
FEB 2008