Panasonic DP-C305 Service Manual page 469
Hide thumbs
Also See for DP-C305:
- Operating instructions manual (112 pages) ,
- Scan/email manual (62 pages) ,
- Service handbook (808 pages)
Table of Contents
Advertisement
Code
Function
E7-59 Finisher
Upper Limit
Sensor
E7-60 Finisher
Aligning:
Rear Motor
E7-61 Finisher
Aligning:
Front Motor
E7-62 Finisher
Aligning:
Stapler
E7-63 Finisher
Backup RAM
1 (Punch)
Data Error
E7-64 Finisher
Backup RAM
2 (Finisher)
Data Error
E7-65 Finisher
Communicati
on Error (EC
PCB-Finisher
PCB)
E7-90 Hardware
Key
Abnormal
E7-91 Data Security
Kit Abnormal
(DP-C405 /
C354 Series)
Note:
These error codes will appear only when the optional accessories are installed. Refer to the appropriate
Optional Unit Service Manual.
Ver. 1.1
E7: Optional Unit Error Codes
Contents
Paper Height
detection Sensor
detects the Upper
Limit.
Rear Aligning Home
Position Sensor
does not detect On/
Off.
Front Aligning
Home Position
Sensor does not
detect On/Off.
Stapler Sensor
detects Stapler Jam
twice continuously.
Backup RAM 1 Data
on Punch PCB is
abnormal.
Backup RAM 2 Data
on Finisher
Controller PCB is
abnormal.
Communication
Error between EC
PCB and Finisher
PCB.
Hardware Key is
incorrect.
Hardware Key (Data
Security Kit) is not
installed.
Section
Finisher
1. Check the Stack Tray Paper Height
Detection Sensor, or Paper Hold Lever
Detection Sensor connectors.
2. Stack Tray Paper Height Detection
Sensor, or the Paper Hold Lever
Detection Sensor is defective.
3. Upper Limit Detection Sensor is
defective.
4. Check the Upper Limit Detection
Sensor connector.
5. PCB is defective. (Finisher Controller
PCB for DA-FS405/FS356/FS325 /
CONT PCB for DA-FS402/FS350/
FS320)
Finisher
1. Rear Aligning Home Position Sensor is
defective.
2. Rear Aligning Motor is defective.
Finisher
1. Front Aligning Home Position Sensor is
defective.
2. Front Aligning Motor is defective.
Finisher
1. Staple Jammed in the Cartridge.
2. Stapler Sensor is defective.
3. Stapler Motor is defective.
Finisher
1. Punch PCB is defective.
Finisher
1. Finisher Controller PCB is defective.
Finisher
1. Incorrect Finisher ROM Version.
2. Incorrect EC Firmware Version.
Hardware
1. Incorrect Hardware Key is installed.
Key
2. Hardware Key is defective.
Hardware
Hardware Key for Data Security Kit is not
Key
installed.
469
DP-C405/C305/C265
Check Points
Unit
DA-
FS405/
FS402/
FS356/
FS325/
FS350/
FS320
DA-
FS405/
FS356/
FS325
only
DA-
FS405/
FS402/
FS356/
FS325/
FS350/
FS320
DA-
FS405/
FS356/
FS-325
only
DA-
FS405/
FS402/
FS356/
FS325/
FS350/
FS320
FEB 2008
- Quick Links:
- Error Codes (for Copier)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
