Panasonic DP-C305 Service Manual page 688
Hide thumbs
Also See for DP-C305:
- Operating instructions manual (112 pages) ,
- Scan/email manual (62 pages) ,
- Service handbook (808 pages)
Table of Contents
Advertisement
9.10.2. Installation
CAUTION!
Turn the Power Switch on the Left Side, and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
3.94 in (100 mm)
55.48 in
(1410 mm)
Ver. 1.1
3.94 in (100 mm)
3.94 in
(100 mm)
3.94 in
(100 mm)
84.05 in (2135 mm)
1. Selecting the Installation Site
Make sure that there will be adequate space for work
(Ex: Loading paper, replacing supplies, etc.).
Make sure also that the Finisher will be placed on the
same floor surface as its host machine
(Ex: At the same height, slope, etc.).
2. Unpacking
Note:
This Finisher is protected with Packing Materials
such as Tapes, and Spacers against vibration and
shocks caused during transportation. Be sure to
remove them before using the Finisher.
Caution:
The Finisher weights approximately 81.4 lb (37
kg). To prevent injuries, use the appropriate
number of personnel, and the proper equipment to
lift, or move the Finisher.
Move the Finisher next to the left side of the
machine, and remove the packing materials using
the following procedure.
(1) Unpack the Stapler, Finisher, and accessories.
(2) Remove the Tapes securing the Stapler,
Finisher, Accessory Cover, etc. along with the
packing materials.
Note:
The removed Tapes, and packing materials will be
needed when transporting the Finisher for
relocation or repair; it is a good idea to store them
in a safe place for future use.
688
DP-C405/C305/C265
FEB 2008
- Quick Links:
- Error Codes (for Copier)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
