Panasonic DP-C305 Service Manual page 447
Hide thumbs
Also See for DP-C305:
- Operating instructions manual (112 pages) ,
- Scan/email manual (62 pages) ,
- Service handbook (808 pages)
Table of Contents
Advertisement
Code
U7
Close Right Cover Lower
(Feed Cover2/Feed Cover(Option))
U8
Close Paper Transport Unit
U11
Remove Paper in Finisher
U12
Close Finisher Staple Cover / Upper
Cover
No Punch Dust Box
U13-1
No Toner or Low Toner (Y)
U13-2
No Toner or Low Toner (M)
U13-3
No Toner or Low Toner (C)
U13-4
No Toner or Low Toner (BK)
U14
Replace Toner Waste Container
U15
No Toner Waste Container
U16
No Developer Unit
(Y, M, C, BK)
U18
Total Copy Limit Over
U20
Close ADF Cover
U21
Close ADF
U25
Toner Cartridge Motor Rotation Error
(Y, M, C, BK)
U27
No Fuser Unit
U28
No Drum Unit
(Y, M, C, BK)
U29
Replace Drum Unit
(Y, M, C, BK)
U30
Close Punch Cover
(Upper/Front Cover)
Ver. 1.1
User Error Codes (U Code) Table
Item
Check Points
1. Right Cover is open.
2. Right Cover Sensor is disconnected.
3. Right Cover Sensor is defective.
4. LVPS connector is disconnected.
5. LVPS is defective.
6. EC PCB connector is disconnected.
7. EC PCB is defective.
1. Paper Transport Unit open.
2. Paper Transport Unit Sensor disconnected.
3. LVPS connector disconnected.
4. LVPS defective.
5. EC PCB connector disconnected.
6. EC PCB defective.
1. Paper left in the Finisher.
2. Finisher Paper Exit Sensor defective.
1. Close Finisher Staple Cover.
2. Finisher Staple Cover Sensor is disconnected.
3. Finisher Staple Cover Sensor is defective.
4. Punch Dust Box is not installed (DA-FS405/FS356/
FS325 only).
1. Toner Cartridge is not installed correctly.
2. No or Low Toner.
3. EC PCB connector is disconnected.
4. EC PCB is defective.
5. Hopper Unit is not installed correctly.
1. Toner Waste Container is full.
(See Section 9.18.)
1. Toner Waste Container is not installed.
2. Toner Waste Container Sensor is disconnected.
3. Toner Waste Container Sensor is defective.
1. Developer Unit is not installed.
1. Department Copy Counter is full.
1. ADF Cover is open.
2. ADF is not installed correctly.
3. ADF Cover Sensor is disconnected.
4. ADF Cover Sensor is defective.
5. LVPS connector is disconnected.
6. LVPS is defective.
1. ADF and ADF Cover are open.
2. ADF Sensor is disconnected.
3. ADF Sensor is defective.
1. Toner blocked in the Toner Cartridge.
(Shake the Toner Cartridge to loosen the contents)
1. Fuser Unit is not installed.
1. Drum Unit is not installed.
1. Drum Unit requires replacement.
1. Punch Cover is open.
2. Punch Cover Sensor is disconnected.
3. Punch Cover Sensor is defective.
447
DP-C405/C305/C265
FEB 2008
- Quick Links:
- Error Codes (for Copier)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
