Panasonic DP-C305 Service Manual page 453
Hide thumbs
Also See for DP-C305:
- Operating instructions manual (112 pages) ,
- Scan/email manual (62 pages) ,
- Service handbook (808 pages)
Table of Contents
Advertisement
Code
J63
1. The Paper Path Sensor
in the Saddle. (DA-FS405/FS356/FS325)
2. The Paper Path Sensor
sensor is activated. (DA-FS405/FS356/FS325)
(Refer to Sect 12.1.2.5. Saddle Unit)
J64
1. The Puncher is not activated correctly. (DA-FS405/FS356/FS325)
2. The Punch Sensor
(Refer to Sect 12.1.2.6. Punch Unit)
J65
1. The Paper Exit Sensor (1819-27) does not detect paper within a predetermined
time in the Finisher. (DA-FS402/FS350/FS320)
2. The Paper Exit Sensor (1819-27) does not go Off within a determined time in the
Finisher. (DA-FS402/FS350/FS320)
3. The Paper Exit Sensor
(DA-FS402/FS350/FS320)
J66
The Stapler is not activated correctly. (DA-FS405/FS356/FS325)
J70-79 (See the following table below)
J80
The Automatic Duplex Unit (ADU) Paper Path Sensor 0
paper within a predetermined time.
J81
The ADU Paper Path Sensor 1
predetermined time.
J82
The ADU Paper Path Sensor 2
predetermined time.
J83
The ADU Paper Path Sensor 0
J86
1. The ADU Paper Path Sensor 0
2. The ADU Paper Path Sensor 0
starts rotating.
J87
1. The ADU Paper Path Sensor 1
2. The ADU Paper Path Sensor 1
starts rotating.
J88
1. The ADU Paper Path Sensor 2
2. The ADU Paper Path Sensor 2
starts rotating.
J92-94 (See the following table below)
J96
The Printer Sequence Jam 4: System Timer detection error after Printing.
J97
The Printer Sequence Jam 3: System Timer error during Printing process.
J98
The Printer Sequence Jam 2: System Timer error during Printing Preparation.
J99
The Printer Sequence Jam 1: 2-sided printing did not start after a determined time has
lapsed.
<J70~79 and J92~94 Codes for i-ADF>
Code
J70
The ADF Registration Sensor 1
predetermined time in the ADF.
J71
The ADF Registration Sensor 1
predetermined time in the ADF.
J72
1. The ADF Registration Sensor 2
predetermined time after the ADF Registration Sensor 1
2. The ADF Registration Sensor 2
predetermined time after the ADF Registration Sensor 3
Ver. 1.1
Jam Error Codes (J Code) Table
Contents
(PI10)
does not detect paper within a predetermined time
(PI10)
does not go Off within a determined time after the
(PI11)
goes On before the start of initialization.
(1819-27)
detects paper before the start of initialization.
(1819-31)
does not detect paper within a
(1819-07)
does not detect paper within a
(1819-38)
does not go Off within a determined time.
(1819-38)
(1819-38)
(1819-31)
(1819-31)
(1819-07)
(1819-07)
Contents
(401-06)
does not detect paper within a
(401-06)
keeps dedicating paper after a
(401-08)
(401-08)
453
(1819-38)
detects paper before initialization.
detects paper before the Feed Roller
detects paper before initialization.
detects paper before the Feed Roller
detects paper before initialization.
detects paper before the Feed Roller
does not detect paper within a
(401-06)
does not detect paper within a
(401-09)
DP-C405/C305/C265
does not detect
is activated.
is activated.
Section
Finisher
Saddle
Finisher
Punch
Finisher
ADU
Printer
ADU
Section
ADF
FEB 2008
- Quick Links:
- Error Codes (for Copier)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
