9. E7-52, Paddle Motor Fault (For DA-FS405/FS356/FS325 only)
Paddle Home Position Sensor (PI2)
1) Check the paddle home position sensor. Is the sensor normal?
NO : Replace the sensor.
Swing Guide Home Position Sensor (PI3)
2) Check the swing guide home position sensor. Is the sensor normal?
NO : Replace the sensor.
Wiring
3) Is the wiring between the Finisher Controller PCB and the paddle motor normal?
NO : Correct the wring.
Paddle, Swing Guide Assembly
4) Try turning the paddle motor clockwise and counter-clockwise by hands. Is there
mechanical tapping in the rotation of the paddle or the up/down movement of the
swing guide?
YES: Correct the mechanical mechanism.
Paddle Motor (M2), Finisher Controller PCB
5) Try replacing the paddle motor. Is the problem corrected?
YES: End.
NO :Replace the Finisher Controller PCB.
Ver. 1.1
Table 5-024
857
DP-C405/C305/C265
FEB 2008