Feed / Delivery - Panasonic DP-C305 Service Manual

Hide thumbs Also See for DP-C305:

Table of Contents

12.1.2.2.2. Feed / Delivery

The Machine forwards the sheets coming from its host machine to the Delivery Tray, Processing Tray,

or Saddle Unit according to the type of delivery used. The sheets forwarded to the processing tray or

the Saddle Unit are offset, stapled, or folded.

Fig. 2-015 shows the motors that are associated with moving and aligning sheets. These motors are

controlled (rotated clockwise or counter-clockwise) by the microprocessor (CPU) on the Finisher

Controller PCB.

The paper path is equipped with the sensors shown in Table 2-002 used to monitor the arrival or

passage of sheets.

If a sheet fails to arrive at, or move past a specific sensor within a specific period of time, the Finisher

Controller will assume a jam, and stops the ongoing operation and, at the same time, communicates

the presence of a jam to the Host Machine.

Paddle Motor

Delivery Motor

Alignment Plate Motor (Front)

Alignment Plate Motor (Rear)

Staple / Fold Motor

Stepping Motor

Brush DC Motor

DP-C405/C305/C265

Connector on Finisher

Controller PCB

Show Quick Links

Table of Contents

Dp-c405 Dp-c265