Ver. 1.1
(3) Install the Hardware Key into one of the four
available connectors (CN11, CN12,CN13, or
CN99) on the SC PC Board.
Note:
The connector is keyed, to prevent damage to the
SC PC Board, install the Hardware Key as
illustrated. Do not force the Hardware Key into the
connector if facing the wrong way.
(4) Proceed with the installation of other options.
If finished, reinstall all Harnesses, and Covers.
(5) Plug the AC Power Cord, and turn the Main
Power Switch on the Back, and the Power
Switch on the Left Side of the machine to the ON
position.
(6) Reconnect the Telephone Line / LAN Cable if
disconnected.
(7) Update the firmware of the unit to the PS Option
firmware. Refer to the attached "Service
Notes".
(8) Install the PS Software into the PC with the
Operating Instructions by following the prompts
of the Installation Wizard.
(9) Attach the Adobe PostScript 3 Label onto the
Front Panel as illustrated.
659
DP-C405/C305/C265
FEB 2008