Panasonic DP-C305 Service Manual page 795
Hide thumbs
Also See for DP-C305:
- Operating instructions manual (112 pages) ,
- Scan/email manual (62 pages) ,
- Service handbook (808 pages)
Table of Contents
Advertisement
12.1.2.6. Punch Unit (Option)
12.1.2.6.1. Basic Operations
1. Outline
The Punch Unit is an option and is designed for installation to the Pickup Assembly of the Finisher. The
Punch Unit is not equipped with a paper feeding mechanism, and the sheets from the Host Machine
move through the Punch Unit and then the feed system of the Finisher.
When the trailing edge of a sheet from the Host Machine reaches the Punch Unit, the sheet is stopped
once, and the Punch Shaft is rotated to punch a hole along the trailing edge. These operations are
controlled with various commands from the Finisher Controller PCB as well as the commands from the
Punch Controller PCB.
Ver. 1.1
Punch Drive System
Horizontal Registration
Drive System
Punch Controller
PCB
Fig. 2-047
795
DP-C405/C305/C265
FEB 2008
- Quick Links:
- Error Codes (for Copier)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
