[18]
[20]
Ver. 1.1
[16]
[17]
Fig. 3-022
Fig. 3-023
[19]
Fig. 3-024
(7) Turn the Gear [16] to align the round hole in the
Staple Driver Gear with the Round Hole [17] at
the back.
(8) Insert a Pin [18] with a diameter of
approximately 2 mm (use of a 2 mm Allen
wrench is recommended) in the Round Hole to
secure the Gear.
(9) Turn the Gear [19] to align the Round Hole in the
Staple Clincher Cam with the Round Hole [20]
at the back.
814
DP-C405/C305/C265
FEB 2008