Panasonic DP-C305 Service Manual page 467
Hide thumbs
Also See for DP-C305:
- Operating instructions manual (112 pages) ,
- Scan/email manual (62 pages) ,
- Service handbook (808 pages)
Table of Contents
Advertisement
Code
Function
E7-21 Finisher
Paper Exit
Motor
E7-23 Finisher
Staple Motor
E7-24 Finisher
Staple Shift
Motor
E7-27 Finisher Tray
Lift Motor
E7-28 Finisher
Punch Motor
E7-29 Finisher
Punch Shift
Motor
Ver. 1.1
E7: Optional Unit Error Codes
Contents
Finisher Paper Exit
Motor is jammed.
Finisher Staple
Home Position
Sensor does not
turn Off/On within a
predetermined time.
Finisher Staple Shift
Home Position
Sensor does not
turn Off/On within a
predetermined time.
Finisher Tray Lift
Sensor does not
turn Off/On within a
predetermined time.
Finisher Punch
Home Position
Sensor does not
turn Off/On within a
predetermined time.
Finisher Side
Registration Home
Position Sensor
does not turn Off/On
within a
predetermined time.
Section
Finisher
1. Check the Paper Feed Motor
connector.
2. Paper Feed Motor is paper jammed.
Finisher
1. Check the Stapler Unit connector.
2. Stapler Unit is defective.
3. Stapler Home Position Sensor is
defective.
4. Stapler Cover Micro-SW is defective.
5. Saddle Unit Micro-SW is defective.
6. Check the Large Solenoid Gear
connector.
7. Large Solenoid Gear is defective.
8. Check the Paper Feed Motor
connector.
9. Staple Motor is jammed with a staple.
Finisher
1. Check the Staple Shift Motor
connector.
2. Staple Shift Motor is defective.
Finisher
1. Check the Stack Tray Paper Height
Detection Sensor, or Paper Hold Lever
Detection Sensor connectors.
2. Stack Tray Paper Height Detection
Sensor, or the Paper Hold Lever
Detection Sensor is defective.
3. Check the Lift Motor connector.
4. Lift Motor is defective.
5. PCB is defective. (Finisher Controller
PCB for DA-FS405/FS356/FS325 /
CONT PCB for DA-FS402/FS350/
FS320)
6. Lift Drive Gear is defective.
Finisher
1. Punch Home Position Sensor is
defective.
2. Punch Motor Lock Sensor is defective.
3. Finisher Controller PCB is defective.
4. Punch Motor is defective.
Finisher
1. Side Registration Home Position
Sensor is defective.
2. Finisher Controller PCB is defective.
3. Side Registration Motor is defective.
467
DP-C405/C305/C265
Check Points
Unit
DA-
FS405/
FS356/
FS325
only
DA-
FS405/
FS402/
FS356/
FS325/
FS350/
FS320
DA-
FS405/
FS356/
FS325
only
DA-
FS405/
FS402/
FS356/
FS325/
FS350/
FS320
DA-
FS405/
FS356/
FS325
only
FEB 2008
- Quick Links:
- Error Codes (for Copier)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
