Huawei iSiteC BTS3601C Installation Manual page 67

Cdma base station

Hide thumbs Also See for iSiteC BTS3601C:

Table of Contents

Installation Manual

iSiteC BTS3601C CDMA Base Station

I. Tools required　

Spanners (one is 19mm and the other is 22mm), fast cable cutter, fast cable stripper,

safety knife, electric blower, diagonal pliers, nipper pliers, pliers, file, brush and ruler

are all required.　

II. Making connectors　

Get the required tools ready and put them in a convenient place.　

Straighten the end of the feeder to be mounted with a connector.　

Cut the feeder with a fast cable cutter. The cutting surface should be smooth.　

Cut the cable skin at 51mm away from the connector with the fast cable cutter and

the safety knife, as shown in Figure C-10.　

Add O-ring and apply proper amount of grease on it, as shown in Figure C-11.　

Figure C-10 Cutting cable skin　

Figure C-11 Adding O-ring and applying grease　

Add fixing nut, as shown in Figure C-12.　

Place spring ring and fix it in the outer conductor trough of the feeder, as shown in

Figure C-13.

C-6

Hardware Installation

C Making Connectors

Table of Contents

Chapters

Table of Contents