Huawei iSiteC BTS3601C Installation Manual page 60

Cdma base station

Hide thumbs Also See for iSiteC BTS3601C:

Table of Contents

Installation Manual

iSiteC BTS3601C CDMA Base Station

All the cables should be secure. Do not over-strain the cables running round the

corner. Cables and fibers should run in straight and smooth courses without any

cross. Cables and fibers in the same direction should be bundled up. The cable

layout should be neat and tidy with the same bundling space.

There should be no damage to the shell of all the cables.　

II. Environment condition check　

There should be no sundries inside or on top of the sun-shading cover. The cover

should be clean without any smudge or fingerprint.　

There should be no redundant tape or cable tie on the cable.　

There should be no tape, cable tie head, waste paper, or packing bag around the

IAFB.　

All the things around the BTS should be clean and neat in their original

appearance.　

III. Power-on check　

Open the door of the IAFB and check whether the voltage of the power supply is normal.

If ther power switch is turned on normally, test with the multimeter whether the output

voltage is normal.　

A-7

Hardware Installation

A Installing IAFB

Table of Contents

Chapters

Table of Contents