Huawei iSiteC BTS3601C Installation Manual page 6

Cdma base station

Hide thumbs Also See for iSiteC BTS3601C:

Table of Contents

Installation Manual

iSiteC BTS3601C CDMA Base Station

Figure 3-5 Directional antenna fixing clip

Figure 3-6 Directional antenna tilt angle adjustment device

The installation procedure of accessories is as follows:

First, determine the two fixed adjusting points on the top and bottom of the

antenna according to the label on the back of the antenna. The point on the top of

the antenna is for adjusting the pitch angle, and the point on the bottom for fixing

the antenna and its support.

Mount each accessory to its position according to the assembly diagram provided

by the vendor. All the accessories must be furnished with spring washers and plain

washers.

Jumper connection: Take off the jacket at the lower part of the antenna. Then

connect the jumper connector and the antenna connector and fasten them.

Perform waterproof treatment to the connector (the same method as that to the

connector between omni antenna and jumper).

3 Installing RF Antenna and Feeder System

3-5

Hardware Installation

Table of Contents

Chapters

Table of Contents