Download Print this page

Hoisting Feeder - Huawei iSiteC BTS3601C Installation Manual

Cdma base station

Hide thumbs Also See for iSiteC BTS3601C:

Table of Contents

Installation Manual

iSiteC BTS3601C CDMA Base Station

Attach the corresponding labels to both ends of the feeder after cutting a piece.

3.7.2 Hoisting Feeder

Wrap the feeder end in a piece of gunny cloth (or antistatic bag) after the

corresponding connector is completed. Bind the cloth up using a rope or a binding

tape;

Knot the lifting rope at the point about 0.4m away from the feeder end and tie

another knot at the point about 4.4m away from the feeder end to prepare for

feeder hoisting, as shown in Figure 3-34.

(1)

(2)

(1) Lifting rope

Figure 3-34 Protection of feeder connector

Hoist the feeder to the tower platform. No violent hoisting is allowed so as to avoid

damage to the feeder skin due to possible collision with the building or the tower.

In the meantime, take care of your safety.

Fix the upper end of the feeder in a proper position by multiple-point fastening lest

that the feeder fall from the tower. However, it should not be too close to the

antenna, as shown in Figure 3-35. Select 1-for-1 fixing clip or 1-for-3 fixing clip as

is required, as shown in Figure 3-36.

3 Installing RF Antenna and Feeder System

(2) Feeder

3-26

Hardware Installation

Table of Contents

Table of Contents