Playing Back Non-Audio Data; Repeat Playback) - Sony SRW-5100 Operation Manual
Hd digital videoscassette player
Hide thumbs
Also See for SRW-5100:
- Operation manual (34 pages) ,
- Brochure (20 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
Preroll time ×
IN point
initial speed
Tape runs at
Playback at the
initial speed
memorized speeds
5-2-5 Playing Back Non-audio Data
Non-audio data recorded on a tape is detected
automatically and played back.
Note
When non-audio data is being played back:
• Below the input display in the audio level meter section,
the DATA mark lights in white.
• For the audio level meters, all regions light.
• The analog audio outputs (output to the MONITOR
OUTPUT connector and the PHONES jack) are turned
off.
• The audio output level can be adjusted during non-audio
data playback, but output non-audio data is not affected.
5-2-6 Playing Back Specified
Section Repeatedly (Automatic
Repeat Playback)
A section between specified two points can be played back
repeatedly.
Speed variation
end point
Playback at
normal speed
1
Set the VTR SETUP menu item T01 "AUTO
REPEAT" to "on".
2
Rotate the search dial in jog or shuttle mode to position
the start point of automatic repeat playback (IN point).
For details on jog/shuttle mode playback, see "5-2-2
Variable Speed Playback" on page 95.
3
Press the IN button while holding down the ENTRY
button.
The time data for the IN point appears in the menu
display.
4
In the same manner, position the end point of
automatic repeat playback (OUT point). Then, press
the OUT button while holding down the ENTRY
button.
The time data for the OUT point appears in the menu
display.
5
Press the PREROLL button while holding down the
SFT button.
The tape prerolls to a point prior to the IN point, and
playback starts, After passing through the OUT point,
the tape is rewound to the preroll point, and this unit
repeats the playback of the specified section.
Preroll time of the IN point and postroll time of the
OUT point are determined by VTR SETUP menu
items 302 "PREROLL TIME" and 303 "POSTROLL
TIME," respectively.
Note
Due to the difference in the operation button assignments,
automatic repeat playback operation on the SRW-5100
differs in some degree from that on the SRW-5800.
99
5-2 Playback
Advertisement
Table of Contents
