Digital Audio Output Signal Source Track Selection; (Sdout Exchng) - Sony SRW-5100 Operation Manual
Hd digital videoscassette player
Hide thumbs
Also See for SRW-5100:
- Operation manual (34 pages) ,
- Brochure (20 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
2
Carry out the source track selection for the digital
audio output signal on each channel.
TR1 to TR12: Select the audio signals recorded on
tracks 1 to 12.
3
Press the [F10] (EXIT) button.
This returns to the AUDIO menu screen.
To make output settings for individual channels
with the F buttons
By pressing any of the [F1] (DIGOUT CH1 TR1) to [F8]
(DIGOUT CH8 TR8) buttons menu, and the [F1]
(DIGOUT CH9) to [F4] (DIGOUT CH12) buttons in the
ALT+DIG OUT screen obtained by pressing the ALT
button, you can select the source track for each channel.
To make input signal selections for individual
channels with the numeric buttons
1
Press the cursor T or t button, to align the cursor
with the channel for which you want to make the
selection.
2
Press the cursor R or r button, to select the source track
to be output.
To return to the default settings
Press the cursor center button. The cursor item returns to
the default.
To revert the source tracks of all channels to
default settings
Press the [F9] (DIGITAL ALL RESET) button in the
ALT+DIG OUT menu.
The source tracks of all channels return to their default
settings.
You can also make the source track selection using VTR
SETUP menu item 834 "DIGITAL AUDIO OUTPUT
EXCHANGE".
4-6-2 Digital Audio Output Signal
Source Track Selection (SDOUT
EXCHNG)
To make the source track selection for the digital audio
output signal (audio multiplexed with SD SDI), use the
following procedure.
1
Press the [F5] (SDOUT EXCHNG) button.
The SDOUT menu appears, together with a source
track selection menu for the digital audio output
signals.
2
Press [F9] (SD OUT EXCHNG) to set the display to
"ena"s.
ena: Enable the settings of this menu.
dis: Disable the settings of this menu, and use the
settings for CH1 to CH8 of DIGOUT EXCHNG.
3
Select the digital audio output signal for each channel.
TR1 to TR12: Output the audio signals recorded on
tracks 1 to 12.
4
Press the [F10] (EXIT) button.
This returns to the AUDIO menu.
Making output settings for individual channels
with the F buttons
By pressing any of the [F1] (SDOUT CH1 TR1) to [F8]
(SDOUT CH8 TR8) buttons, you can select the source
track for each channel.
Making input signal selections for individual
channels with the numeric buttons
1
Press the cursor T or t button, to align the cursor
with the channel for which you want to make the
selection.
2
Press the cursor R or r button, to select the source
channel to be output.
85
4-6 AUDIO Menu
Advertisement
Table of Contents
