Memory Stick" Operations - Sony SRW-5100 Operation Manual
Hd digital videoscassette player
Hide thumbs
Also See for SRW-5100:
- Operation manual (34 pages) ,
- Brochure (20 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
Recalling menu settings from a VTR
memory bank
1
Press the SET UP button.
The SET UP menu appears in the display.
2
Press the [F1] (VTR BANK) button.
The VTR BANK menu appears in the display.
3
Press the [F8] (DIRECTION) button to select the <
direction.
The left cursor bar flashes.
4
Press the cursor R or r button to move the cursor (B) to
the number of the VTR memory bank to be recalled.
5
Press the [F9] (COPY) button.
A message asking you to confirm the operation
appears in the display.
To cancel the recalling operation
Press the CLR button.
6
Press the [F9] (COPY) button while holding down the
SFT button.
The menu settings are recalled from the selected VTR
memory bank.
When the recalling process has been completed, the
title of the VTR bank appears under CURRENT
SETUP in the display.
38
4-1 Registering and Storing Menu Settings
CLR button
7
Press the [F10] (EXIT) button.
The SET UP menu appears again.
4-1-5 "Memory Stick" Operations
You can store menu settings in the VTR memory banks
and cue point data to a "Memory Stick" for recall later.
PCMCIA card slot
To eject the "Memory Stick"
Raise up the lower control panel, and press the eject button
on the memory card adaptor inserted in the PCMCIA slot.
For details of opening and closing the control panel, refer
to the Maintenance Manual.
Notes
• When inserting a "Memory Stick," press the memory
card adaptor that accommodates the "Memory Stick"
firmly in as far as it will go. The stick recognition status
is shown on the MEMCARD menu. If not inserted
properly, reinsert it.
• While data is being read from or written to the "Memory
Stick," the status appears on the screen. During these
operations, do not remove the "Memory Stick."
• When no directory is found on the inserted "Memory
Stick" for storing the settings of the SRW-5100/5800
("SRW5800"), the message "CONFIRMATION OF
CREATING DIR:" appears in the MEMCARD menu
display.
Press the [F1] (FORMAT CARD) button while holding
down the SFT button to create a directory. To cancel
creating a directory, press the CLR button.
• The data to be stored to the "Memory Stick" can be
commonly used with both the SRW-5100 and the SRW-
5800. Therefore, the stored data contains portions that
are not used with the SRW-5100.
Formatting a "Memory Stick"
"Memory Stick" must be formatted before you can use it.
Advertisement
Table of Contents
