hit counter script
Fein GHB15-50 Repair Instructions
  1. Manuals
  2. Brands
  3. Fein Manuals
  4. Grinder
  5. GRIT GHB 15-50
  6. Repair instructions

Fein GHB15-50 Repair Instructions

Hide thumbs Also See for GHB15-50:
Table of Contents

Advertisement

Quick Links

Download this manual
Grinding
Repair instructions
Applies to:
GHB15-50 (A); GHB15-50 INOX (A)
34130561060
Printed in Germany

Advertisement

Table of Contents
loading

Related Manuals for Fein GHB15-50

Summary of Contents for Fein GHB15-50

  • Page 1 34130561060 Grinding Printed in Germany Repair instructions Applies to: GHB15-50 (A); GHB15-50 INOX (A)

  • Page 2: Table Of Contents

    Removing the gearbox housing ..................38 Removing the motor ......................... 39 C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 2 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 3 Positioning the gearbox housing..................78 9.10.2 Positioning the carbon brushes ..................79 C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 3 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 4 9.11 Setting gearbox clearance ......................83 10 Inspection following repairs ......................84 C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 4 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 5: Models Described

    GHB15-50 INOX (A) 7 245 02..C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 5 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 6: Technical Data

    Connection diagram The connection diagram can be found in the FEIN electronic information system. Inspection following repairs Further information about the inspection steps required after repairs can be found in the FEIN electronic information system. Documents required for further repair work...

  • Page 7: Symbols Used

    Part of the navigation interface. C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 7 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 8: Notes And Requirements

    C. & E. Fein GmbH assumes no responsibility for the completeness, relevance, quality or correctness of the information provided. Liability claims against C. & E. Fein GmbH that relate to material or immaterial damage caused by the use or failure to use the information provided or by the use of incorrect or incomplete information are excluded.

  • Page 9: Safety Instructions

    Measure that must be taken in order to avoid this danger. C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 9 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 10 Only perform assembly/disassembly work on electronics at a workstation with ESD protection. Avoiding the failure of electronics C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 10 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 11: Tools, Lubricants And Auxiliary Substances Required

    Open-ended spanner 10 mm; 13 mm; 14 mm C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 11 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 12: Special Tools

    29 g Gearbox Thread locking e.g. Loctite 243 compound C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 12 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 13: Test And Diagnostics Options

    34130561060 Printed in Germany Test and diagnostics options Test and diagnostics options Test data The permitted parameters for the machine can be found in the FEIN electronic information system. C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 13 of 84 All rights reserved by FEIN, especially in case of property rights applications.

  • Page 14: Disassembly

    Unscrew the screw (3). Remove the holder (4). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 14 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 15: Removing The Drive Unit

    Remove the grinding belt (2). Loosen the screw (3). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 15 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 16 Remove the drive unit by turning the drive wheel (2). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 16 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 17: Removing The Handle (Small)

    Unscrew the handle (1) from the bolt. Remove the bolt (2). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 17 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 18: Removing The Cover

    Unscrew the three screws (4). Remove the holder (5) with the cover. C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 18 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 19 Unscrew the nuts (3). Remove the eye guard (4). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 19 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 20: Removing The Holder (Handle)

    Unscrew the four screws (1). Remove the holder (2). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 20 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 21: Disassembling The Plate

    Unscrew the screw (4). Remove the handle (5). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 21 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 22: Removing The Support

    Repeat step 1 on the opposite side of the machine. Remove the support (3). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 22 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 23 Unscrew the two screws (1). Remove the block (2). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 23 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 24: Removing The Plate

    Unscrew the two screws (3). Remove the plate (4). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 24 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 25: Removing The Gas Compression Spring

    Unscrew the screws (1) and remove the spacer sleeve. Remove the gas compression spring (2). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 25 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 26: Removing The Drive Wheel

    The cover can be destroyed during disassembly and must be replaced. Unscrew the two set screws (3). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 26 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 27 Remove the flange (3). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 27 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 28: Removing The Contact Wheel

    Remove the screw (4) with the nut. Unscrew the two screws (5). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 28 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 29 Unscrew the screw (3). Remove the holder (4). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 29 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 30: Removing The Spacer Sleeves

    Remove the five screws (1). Remove the five spacer sleeves (2). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 30 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 31: Removing The Flange

    Unscrew the four screws (1). Remove the flange (2). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 31 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 32: Removing The Drive Unit

    Remove the cover (5). Photo shows similar product C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 32 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 33 Remove the cable with the plug (5). Photo shows similar product C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 33 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 34: Disassembling The Housing

    When the cover is replaced, the RFID chip (3) also has to be changed and registered. C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 34 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 35: Removing The Switch

    110/120 V variant Remove the switch (5) (110/120 V variant). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 35 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 36 Open the spring terminals by turning them. Remove the four strands (4). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 36 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 37: Removing The Carbon Brushes

    Lift up the spring (1). Remove the carbon brush (2). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 37 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 38: Removing The Gearbox Housing

    Unscrew the four screws (1). Remove the gearbox housing (2). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 38 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 39: Removing The Motor

    Repeat step 3 on the opposite side of the machine. Remove the control rod (4). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 39 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 40 8.9.1 Removing the stator Remove the stator (1). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 40 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 41: Removing The Armature

    Removing the gearbox housing Tools: Plastic hammer Remove the armature (1). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 41 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 42: Disassembling The Armature

    Remove the bearing bush (1). Remove the bevel pinion (2). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 42 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 43 Remove the deep groove ball bearing (3). Remove the magnet (4). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 43 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 44: Removing The Gearbox

    Remove the bearing plate (2). Remove the washer(s) (3). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 44 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 45: Disassembling The Bearing Plate

    Press out the shaft (1). Remove the plate (2). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 45 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 46 Press out the deep grooved ball bearing (1). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 46 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 47: Disassembling The Gearbox Housing

    Remove the air guide ring (1). Remove the pushbutton (2). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 47 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 48 Only remove the needle sleeve (4) if necessary. Remove the needle sleeve (4). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 48 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 49: Assembly

    Screw in the four screws (2) [4.0 Nm ±0.6 Nm C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 49 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 50: Fitting The Spacer Sleeves

    Screw in the five screws (2) [4.5 Nm ±1.0 Nm C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 50 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 51: Fitting The Contact Wheel

    Position the plate (3). Screw in the screw (4). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 51 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 52 Position the holder (4) on the plate. C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 52 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 53 Coat the screws with thread-locking fluid. Screw in the four screws (2). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 53 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 54: Fitting The Drive Wheel

    (2) [6.0 Nm ±1.0 Nm]. Position the drive wheel (3). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 54 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 55 The drive wheel will be adjusted at the end of the fitting procedure. C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 55 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 56: Fitting The Support

    Position the support (3). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 56 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 57 The support will be adjusted at the end of the fitting procedure. C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 57 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 58: Fitting The Gas Compression Spring

    Screw in the screw (3) [3.5 Nm ± 0.6 Nm C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 58 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 59: Fitting The Plate

    Screw in the four screws (4) with the spacer sleeves C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 59 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 60: Fitting The Tensioning Arm

    Screw in the screw (5) [3.5 Nm ± 0.6 Nm C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 60 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 61 To fit the gas compression spring, move the contact wheel all the way inwards. C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 61 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 62: Fitting The Holder (Handle)

    Screw in the three screws (4) [4.5 Nm ± 1.0 Nm Photo shows similar product C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 62 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 63: Fitting The Cover

    ± 1.0 Nm Screw in the screw (7). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 63 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 64: Fitting The Handle (Small)

    Slide the bolt (1) into the holder. Screw the handle (2) into the bolt. C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 64 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 65: Positioning The Drive Unit

    Slide the drive unit all the way into the flange. C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 65 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 66 Insert the two clips (3) on the cover. C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 66 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 67: Assembling The Handle

    Screw in the screw (5) [13.5 Nm ±1.5 Nm C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 67 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 68: Adjusting The Support/Belt Run

    Distance of the support to the grinding belt is 1 mm. Align the support (3). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 68 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 69 (3) with a wrench (10 mm) to the right or left as necessary. Adjust the belt run. C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 69 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 70: Fitting The Drive Unit

    Insert the spiral spring (1) and the bolt (2) with a sealing ring (3). Fit the pushbutton (4). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 70 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 71: Assembling The Bearing Plate

    Press in the grooved ball bearing (1). Press in the shaft (2). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 71 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 72 Fill the gearbox housing with grease. Position the washer(s) (3). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 72 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 73: Positioning The Bearing Plate

    Screw in the four screws (2) [2.4 Nm]. Position the air guide ring (3). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 73 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 74: Assembling The Motor

    Press on the magnet (5). Position the bearing bush (6). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 74 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 75: Positioning The Armature

    If the armature can be pulled out of the gearbox head by hand, the gearbox housing must be replaced. C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 75 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 76: Fitting The Stator

    Position the control rod (2). Position the slide switch (3). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 76 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 77 Hook the control rod onto the slide switch (1). Position the air guide ring (2). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 77 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 78: Assembling The Housing

    Screw in the four screws (2) [2.7 Nm]. C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 78 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

  • Page 79: Positioning The Carbon Brushes

    Position the carbon brush (1). Position the spring (2). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 79 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 80 Position the electronics (3) on the switch. Position the switch (4) (120 V variant). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 80 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 81 Position the switch (3). C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 81 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 82 Screw in the two screws (2) [1.5 Nm]. Photo shows similar product C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 82 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 83 Photo shows similar product C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 83 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
  • Page 84 Check restart protection Brake function available: Brake function check C-SC_CSSM Version 1.0_Template 1.0 01.12.2020 Page 84 of 84 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.

This manual is also suitable for:

Ghb15-50aGhb15-50 inoxGhb15-50 inox a

Table of Contents