Table of Contents
Advertisement
3-1-2 Command description
Reference
• The laser marker sends a response data after setting/readout command is transmitted. Refer to "2-5 Communication
Data Format" (P.28)
■ Command reception permission: MKM
Controls the reception permission (reception mode ON/OFF) for setting and readout of communication commands.
Setting / Readout data of command reception mode
Sub
STX
MKM
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
Readout request of command reception mode
STX
MKM
R
Data length
Name
[byte]
Command
reception mode
Reference
• For details on command reception permission, refer to "2-2 Command Reception Condition" (P.22).
• Send MKM command with the shutter opened state. When DIP switch No. 2 is ON and the shutter is closed, the shutter
opens at the timing of "reception mode OFF" is set.
■ Laser pumping: LSR
Controls the laser pumping ON/OFF.
Setting / Readout data of laser pumping
Sub
STX
LSR
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
Readout request of laser pumping state
STX
LSR
R
Data length
Name
[byte]
Laser pumping
Reference
• Control of laser pumping by this command is unavailable when the No. 2 DIP switch on the back surface of controller is
turned to OFF.
• It takes about 20 seconds for LP-Mxxx / LP-Sxxx / LP-Zxxx and about 15 seconds for LP-SxxxW from turning ON the
laser pumping to the completion of pumping.
[Command reception mode]
1-byte
(Check sum)
Delimiter
Description
"0": Reception mode ON
Start command reception in
the marking ready OFF status
1
"1": Reception mode OFF
Finish command reception
and resume the marking ready
ON status
[Laser pumping]
1-byte
(Check sum)
Delimiter
Description
"0": Laser pumping OFF
1
"1": Laser pumping ON
(Check sum)
In the shutter open or marking ready ON status,
set "reception mode ON" when transmitting the
communication command including an action
to update the laser marker data. To resume the
ready ON status after command transmission,
set "reception mode OFF".
(Check sum)
ME-LPMSZ-SR-9
Delimiter
Remarks
Delimiter
Remarks
39
- Quick Links:
- Error Indication
- Alarm
Hide quick links:
Advertisement
Table of Contents
