Fuser Unit - Toshiba e-STUDIO5520c Troubleshooting Manual
Hide thumbs
Also See for e-STUDIO5520c:
- Copying manual (210 pages) ,
- Service handbook (648 pages) ,
- Imaging manual (288 pages)
Table of Contents
Advertisement
1.TROUBLESHOOTING FOR THE HARDWARE
2
Remove the jammed paper.
3
Return the duplexing unit to its original position.
Hold the position shown in the figure when closing it.
Do not put your hand or fingers on the duplexing unit when
closing it.
They could be caught and this could injure you.
Fuser unit
1
Pull out the duplexing unit from the equipment.
Grasp the lever of the duplexing unit and pull it until it stops.
Be careful not to touch the slide rails (A in the figure).
This could injure you.
2
Turn the green dial and remove the paper coming out
of the bottom of the fuser unit.
3
Holding the green lever, pull out the transport guide
toward you.
1 TROUBLESHOOTING FOR THE HARDWARE
A
Clearing a Paper Jam
A
19
Advertisement
Table of Contents
Troubleshooting
