hit counter script
Craftsman 919.184160 Owner's Manual
  1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Air Compressor
  5. 919.184160
  6. Owner's manual
Craftsman 919.184160 Owner's Manual

Craftsman 919.184160 Owner's Manual

Single stage air compressor
Hide thumbs Also See for 919.184160:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
SE, I M $
OWNERS
MANUAL
MODEL NO.
919.184160
IMPORTANT:
Read the Safety
Guidelines
and
All Instructions
Carefully
Before
Operating.
CRAFTSMAN.
SINGLE
STAGE
AIR COMPRESSOR
ASSEMBLY
OPERATION
MAINTENANCE
REPAIRPARTS
Record in the spaces provided.
(1) The model number which can be found
on the label on the front of the air tank
saddle.
(2) The code number which can be found
on the foil label on the side of the air
tank.
(3) The Manufacturer's
Number (ASME
Code Compressors only) is located on
the metal data plate which is welded
onto the side of the air tank, (This data
plate is painted the same color as the
tank.)
(4) The Motor Manufacturer's name which
is located on the motor label.
(5) The Motor Mfg. number- also located
on the motor label.
Retain these numbers for future refer-
ence.
ModeINo.
Code
No.
Sears,
Roebuck
and
Co.,
Hoffman
Estates,
IL 60179
U.S.A.
D20410
Rev 0
2/16/00

Advertisement

Table of Contents
loading

Related Manuals for Craftsman 919.184160

Summary of Contents for Craftsman 919.184160

  • Page 1 SE, I M $ OWNERS MANUAL CRAFTSMAN. SINGLE STAGE AIR COMPRESSOR MODEL NO. 919.184160 Record in the spaces provided. (1) The model number which can be found on the label on the front of the air tank saddle. (2) The code number which can be found on the foil label on the side of the air tank.
  • Page 2 Page SAFETY GUIDELINES ................WARNING CHART ................. SPECIFICATION CHART ..............GLOSSARY .................... ACCESSORIES FOR USE WITH SEARSAIR COMPRESSORS ............GENERAL INFORMATION ..............DESCRIPTION OF OPERATION ............INSTALLATION AND BREAK-IN PROCEDURES ......... Location of AirCompressor .............. Piping ....................Lubrication and Oil ................Wiring Instructions ................
  • Page 3 SAVE THESE INSTRUCTIONS IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT tN SERIOUS INJURY AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. WHAT CAN HAPPEN HOW TO PREVENT IT IT IS NORMAL FOR ELECTRICAL CONTACTS WITHIN THE ALWAYS OPERATE THE COMPRESSOR IN A WELL VENTI- MOTOR AND PRESSURE SWITCH TO SPARK.
  • Page 4 RISK FROM FLYING OBJECTS WHAT CAN HAPPEN HOWTO PREVENTIT ALWAYS WEAR ANSI Z87.1 APPROVED SAFETY GLASSES THE COMPRESSED AIR STREAM CAN CAUSE SOFT TISSUE DAMAGE TO EXPOSED SKIN AND CAN PROPEL DIRT, CHIPS, WITH SIDE SHIELDS WHEN USING THE COMPRESSOR. LOOSE PARTICLES AND SMALL OBJECTS AT HIGH SPEED, NEVER POINT ANY NOZZLE OR SPRAYER TOWARD...
  • Page 5 RISK FROM MOVING PARTS WHAT CAN HAPPEN HOW TO PREVENT MOVING PARTS SUCH AS THE PULLEY, FLYWHEEL AND BELT NEVER OPERATE THE COMPRESSOR WITH GUARDS OR CAN CAUSE SERIOUS INJURY IF THEY COME INTO CONTACT COVERS WHICH ARE DAMAGED OR REMOVED, WITH YOU OR YOUR CLOTHING, ATTEMPTING TO OPERATE...
  • Page 6 Model No. 919.184160 Max. Developed HP Displacement CFM at Max. Pressure Bore 2 7/8 Stroke 2" Vortage - Single Phase Minimum Branch Circuit Requirement 20 amp *Fuse Type Fusetron Type "T" Amperage at Max. Pressure Air Tank Capacity - Gallons 60 gal ASME Approximate Cut-in Pressure Approximate Cut-out Pressure...

  • Page 7: Location Of The Air Compressor

    Separate air transformers which combine the functions of You have purchased an air compressor unit consisting of air regulation and/or moisture and dirt removal should be a two cylinder, single stage air compressor pump, an ASM Eair tank, associated controls and instruments. This used where applicable.

  • Page 8: Wiring Instructions

    top of the oil fill hole. (It must not be allowed to be lower EXCESSIVE VIBRATION MAY WEAKEN than 3/8" - 6 threads down - from the top.) When filling the AIR TANK AND CAUSE AN EXPLOSION. crankcase, the oil flows very slowly. If the oil is added too THE OUTFIT MUST BE MOUNTED quickly, it will overflow and appear to be full.

  • Page 9: Break-In Procedures

    Open the shut-off valve fully, to permit air to escape Break-In Procedures and to prevent pressure build-up in the air tank. Turn ONtheaircompressor. i rR[_'_klJi d[o]_I Run the air compressor for 30 minutes to seal the Serious damage may result if the following rings and lubricate all internal surfaces.

  • Page 10: Safety Valve - Inspection

    Apply sealant to the check valve threads.Reinstall A dirty air filter will not allow the compressor to operate the check valve (turn clockwise). The valve stem at full capacity. Before you use the comoressor, check the air filter to be sure it is clean. should still move freely do not over tighten.
  • Page 11 NOTE Pulley and Flywheel - Alignment The belt should be centered over the The compressor flywheel and motor pulley must be inline grooves on the flywheel and motor pulley. (in the same plane) within 1/16" to assure belt retention within sheave grooves. The motor mounting holes on the Push the motor back into regular position and tighten saddle...
  • Page 12 CORRECTION PROBLEM CAUSE Let the motor cool off and reset switch by pressing Motor will not run. Motor overload protection switch has tripped. the red button located on the end of the motor. Motor wilt start automatically when tank pressure Tank pressure exceeds pressure switch "cut- in"...
  • Page 13 13 -- Eng D20410 Rev 0 2/16/00...
  • Page 14 ) 21 \\\\\ D20410 Rev. 0 2/16/00 14 -- Eng...
  • Page 15 SS-1525-CD Isolator Washer (4 used) D20343 Performance Label SSF-8150 Locking Flange Nut (4 used) LA-2269-1 Maintenance Label LA-3266 Warning Label LA-3105 Craftsman Label SS-2707 Drain Valve TA-4438 Air Receiver - 60 gal. SSW-7367 Strain Relief SS-2110 Nipple CAC-437-2 Check Valve...
  • Page 16 *;'-_ ,.-- 66 (oil drain plug) 16 -- Eng D20410 Rev 0 2/16/00...
  • Page 17 PARTNUMBER DESCRIPTION SSF-6627 Stud 3/8" - 16 Taptite (1 used - Torque 25 to 30 ft. Ibs.) SSF-935 Screw #8-32 x 3/8" (2 used) AC-0322 Filter Plate Assembly Felt Filter AC-0333 SSF-955 Screw 3/8"-16 x 1-1/2" (5 used - Torque 25 to 30 ft. Ibs.) CAC-4213 Head Assembly (includes 2 ea.
  • Page 18 SEARS I:RRFI"$MRNo SINGLE STAGE OWNERS AIR COMPRESSOR MANUAL For the repair or replacement parts you need Call 7 am - 7 pm, 7 days a week MODEL 1-800-366-PART 919.184160 (1-800-366-7278) For in-home major brand repair service Call 24 hours a day, 7 days a week When requesting service or ordering 1 -800-4-REPAIR parts, always provide the following...

Table of Contents