Panasonic CZ-RTC6BL Installation Instructions Manual
Wired remote controller
Hide thumbs
Also See for CZ-RTC6BL:
- Installation instructions manual (74 pages) ,
- Operating instructions manual (94 pages) ,
- Installation instructions manual (68 pages)
Table of Contents
Advertisement
Quick Links
ENGLISH
Read through the Installation Instructions before you proceed with the installation.
In particular, please carefully read the "Safety Precautions".
Model No.
Safety Precautions ........................... 2
System Overview .............................. 5
Part Names (Control panel) ............... 6
Dimensions ....................................... 6
Installation Precautions ..................... 7
Mounting .......................................... 8
Setting ............................................. 10
.......................................... 14
Troubleshooting ................................. 15
Installation Instructions
Wired Remote Controller
CZ-RTC6BL
CZ-RTC6WBL
................................. 16
WEB-ACXF60-39644-EN
W1020-20423
Page
Advertisement
Table of Contents
Related Manuals for Panasonic CZ-RTC6BL
Summary of Contents for Panasonic CZ-RTC6BL
-
Page 1: Table Of Contents
Installation Instructions Wired Remote Controller CZ-RTC6BL Model No. CZ-RTC6WBL Page Safety Precautions ……………………… 2 System Overview ………………………… 5 Part Names (Control panel) …………… 6 Dimensions ………………………………… 6 Installation Precautions ………………… 7 Mounting …………………………………… 8 ... -
Page 2: Safety Precautions
Select an installation location which is rigid and strong enough to support or hold this remote controller, and select a location for easy maintenance. Use only the parts specifi ed by Panasonic as supplied accessories. Ensure cables are installed properly so that external forces cannot aff... - Page 3 WARNING This remote controller must be installed by the sales dealer or installer. When installing the remote controller, use appropriate protective equipment and tools for safety. This remote controller should be securely installed in accordance with the Installation Instructions. ...
- Page 4 CAUTION Ground yourself to discharge static electricity before performing any wiring. Do not install the remote controller in places with direct sunlight or where the ambient temperature is 40 ˚C or more or is 0 ˚C or less. Follow specifi cations. (P.16) ...
-
Page 5: System Overview
● Third party Bluetooth interfaces cannot be connected to the “Panasonic H&C Control App”. ® ● Updates to the service may mean there are changes to the design of the “Panasonic H&C Control App” screen and display. datanavi This unit supports datanavi. -
Page 6: Part Names (Control Panel)
Part Names (Control panel) The control panel colour of CZ-RTC6WBL is white. 1) LCD screen 2) Menu button ● When pressed repeatedly repeatedly during operation, this shows on, this shows operating status confi rmation, s confi rmation, set temperature, operation e, operation mode, fan speed, fl... -
Page 7: Installation Precautions
When connecting the remote controller to indoor units released in April 2020 and after (PACi NX series and subsequent series), 2 remote controllers can be connected. * 2 × CZ-RTC6BL (CZ-RTC6WBL) cannot be connected Indoor unit : Max. 8 Attention ... -
Page 8: Mounting
After installation, set one remote controller to [Main] and the other to [Sub] for [Main/sub] for “Setting”. (See “Setting” section - “RC. setting mode”) When using the remote controllers* in combination, set the CZ-RTC6BL or CZ-RTC6WBL unit to [Main]. *CZ-RTC4, CZ-RE2C2, or CZ-RTC6 (CZ-RTC6W) Note Remote controllers can be connected to any indoor unit for operation. - Page 9 Mount to the wall. There are 2 types of wall-mounting methods: Exposed type and Embedded type. Attention Mounting the bottom case Tighten the screws securely until the screw heads touch the bottom case. (Otherwise, loose screw heads may hit the PCB and cause malfunction when mounting the top case.) ...
-
Page 10: Setting
Embedded type A protective fi lm is attached on the Control panel. Mount the top case. Mount the bottom case to ● Align the claws of the top Pass the wire under the rib. Pass the wire under the rib. the wall. - Page 11 2. Press (Press twice to fi nish.) 3. Press twice to finish. Connecting with the “Panasonic H&C Control App” ® Before connecting, set Bluetooth functionality to [Enable].(Step 4) When connecting, try getting the mobile device as close as possible to the remote controller.
- Page 12 Maintenance func RC. setting mode Auto address Detailed settings Sensor info. Service check Set elec. consumption Check this item as necessary. Steps 1 and 2 are common operations for each item. Press and hold the Select the Total number of items 3 buttons simultaneously,...
- Page 13 Detailed settings Set. Select the indoor unit number, Code no. and Set data.) (When selecting Code no., refer to the following table.) Indoor unit number Press → . (Repeat) Code no. Set data Press After Selecting [YES], the unit restarts. Code no.
-
Page 14: Test Run
Test run Press and hold the Select [Test run]. Total number of items 3 buttons Number for the Press → selected item simultaneously, for at least 4 seconds. Press Select [ON]. Perform the test operation. ( The unit enters the test operation mode. Then, [TEST] turns on.) Press →... -
Page 15: Troubleshooting
Troubleshooting ● Check if OS of the mobile device is compatible. The The “Panasonic “Panasonic H&C Control App” is not guaranteed to work with H&C Control App” all versions of iOS and Android™ OS. cannot be installed See page 16 for the versions of the OS for mobile devices that are supported by the in mobile device. -
Page 16: Specifi Cations
Bluetooth SIG, Inc. and any use ® of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. • iOS is the name of the OS of Apple Inc. IOS is a trademark or registered trademark of Cisco in the US and other countries which has been licensed for use. - Page 17 Panasonic Corporation http://www.panasonic.com WEB-ACXF60-39644-EN © Panasonic Corporation 2020-2023 W1020-20423...