Fan-Sink - HP ProDesk 400 G5 SFF Maintenance And Service Manual
Hide thumbs
Also See for ProDesk 400 G5 SFF:
- Disassembly instructions manual (18 pages) ,
- Maintenance and service manual (113 pages)
Table of Contents
Advertisement
Fan-sink
NOTE:
The fan-sink spare park kit includes replacement thermal material.
Follow these steps to remove the fan-sink:
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
a.
Front bezel (see
b.
Drive cage (see
c.
Shroud (see
Remove the fan-sink:
1.
Disconnect the fan-sink cable (1)from the system board.
2.
Loosen the four slotted Torx-15 captive screws (2)that secure the fan-sink to the computer chassis.
NOTE:
the processor, it may be necessary to move the fan-sink from side to side when removing the it.
3.
Remove the fan-sink (3).
Reverse this procedure to install the fan-sink.
44
Chapter 4 Removal and replacement procedures
Access panel on page
Front bezel on page
Drive cage on page
Fan shroud on page
Due to the adhesive nature of the thermal material located between the fan-sink and
Preparation for disassembly on page
32), and then remove the following components:
34)
35)
43)
31).
Hide quick links:
Advertisement
Table of Contents
