Memory Module - HP ProDesk 400 G5 SFF Maintenance And Service Manual

Hide thumbs Also See for ProDesk 400 G5 SFF:

Table of Contents

Memory module

The computer has four memory module sockets.

CAUTION:

before adding or removing memory modules. Regardless of the power-on state, voltage is always supplied to

the memory modules as long as the computer is plugged into an active AC outlet. Adding or removing memory

modules while voltage is present may cause irreparable damage to the memory modules or system board.

The memory module sockets have gold-plated metal contacts. When upgrading the memory, it is important to

use memory modules with gold-plated metal contacts to prevent corrosion and/or oxidation resulting from

having incompatible metals in contact with each other.

Static electricity can damage the electronic components of the computer or optional cards. Before beginning

these procedures, ensure that you are discharged of static electricity by briefly touching a grounded

metal object.

When handling a memory module, be careful not to touch any of the contacts. Doing so may damage

the module.

Follow these steps to remove a memory module:

Prepare the computer for disassembly (see

Remove the front bezel (see

Remove the drive cage (see

Remove the memory module:

Open both latches (1)of the memory module socket.

Remove the memory module (2)from the socket.

NOTE:

Reverse this procedure to install a memory module. Reconfigure the computer, if necessary.

Chapter 4 Removal and replacement procedures

You must disconnect the power cord and wait approximately 30 seconds for the power to drain

Front bezel on page

Drive cage on page

Memory modules are designed with notches to prevent incorrect insertion.

Preparation for disassembly on page

34).

35).

31).

Table of Contents

Show Quick Links

Table of Contents

Prodesk 400 g6 sff