Appendix B Statement Of Memory Volatility; Current Bios Steps - HP ProDesk 400 G5 SFF Maintenance And Service Manual
Hide thumbs
Also See for ProDesk 400 G5 SFF:
- Disassembly instructions manual (18 pages) ,
- Maintenance and service manual (113 pages)
Table of Contents
Advertisement
B
Statement of memory volatility
The purpose of this appendix is to provide general information regarding nonvolatile memory in HP Business
PCs. This appendix also provides general instructions for restoring nonvolatile memory that can contain personal
data after the system has been powered off and the hard drive has been removed.
HP Business PC products that use Intel®-based or AMD®-based system boards contain volatile DDR memory.
The amount of nonvolatile memory present in the system depends upon the system configuration. Intel-based
and AMD-based system boards contain nonvolatile memory subcomponents as originally shipped from HP,
assuming that no subsequent modifications have been made to the system and assuming that no applications,
features, or functionality have been added to or installed on the system.
Following system shutdown and removal of all power sources from an HP Business PC system, personal data
can remain on volatile system memory (DIMMs) for a finite period of time and will also remain in nonvolatile
memory. Use the steps below to remove personal data from the PC, including the nonvolatile memory found in
Intel-based and AMD-based system boards.
Current BIOS steps
1.
Follow steps (a) through (l) to restore the nonvolatile memory that can contain personal data. Restoring or
reprogramming nonvolatile memory that does not store personal data is neither necessary nor
recommended.
a.
Turn on or restart the computer, and then press esc.
NOTE:
b.
Select Main, select Apply Factory Defaults and Exit, and then select Yes to load defaults.
The computer will reboot.
c.
During the reboot, press esc.
NOTE:
d.
Select the Security menu, select Restore Security Settings to Factory Defaults, and then select Yes to
restore security level defaults.
The computer will reboot.
e.
During the reboot, press esc.
NOTE:
f.
If an asset or ownership tag is set, select the Security menu and scroll down to the Utilities menu.
Select System IDs, and then select Asset Tracking Number. Clear the tag, and then make the selection
to return to the prior menu.
g.
If a DriveLock password is set, select the Security menu, and scroll down to Hard Drive Utilities under
the Utilities menu. Select Hard Drive Utilities, select DriveLock, and then uncheck the checkbox for
DriveLock password on restart. Select OK to proceed.
108 Appendix B Statement of memory volatility
If the system has a BIOS administrator password, enter the password at the prompt.
If the system has a BIOS administrator password, enter the password at the prompt.
If the system has a BIOS administrator password, enter the password at the prompt.
Hide quick links:
Advertisement
Table of Contents
