Solving Media Card Reader Problems - HP ProDesk 400 G5 SFF Maintenance And Service Manual
Hide thumbs
Also See for ProDesk 400 G5 SFF:
- Disassembly instructions manual (18 pages) ,
- Maintenance and service manual (113 pages)
Table of Contents
Advertisement
Computer seems to be locked up.
Cause
Program in use has stopped responding to commands.
Solving media card reader problems
Media card will not work in a digital camera after formatting it in Windows.
Cause
By default, Windows will format any media card with a capacity
greater than 32MB with the FAT32 format. Some digital cameras
use the FAT (FAT16 & FAT12)format and can not operate with a
FAT32 formatted card.
A write-protected or locked error occurs when attempting to write to the media card.
Cause
Media card is locked. Locking the media card is a safety feature that
prevents writing to and deleting from an SD/Memory Stick/PRO
card.
Can not write to the media card.
Cause
The media card is a read-only memory (ROM)card.
Media card is locked. Locking the media card is a safety feature that
prevents writing to and deleting from an SD/Memory Stick/PRO
card.
Unable to access data on the media card after inserting it into a slot.
Cause
The media card is not inserted properly, is inserted in the wrong
slot, or is not supported.
Solution
1.
Use the task manager to close programs that do not respond.
2.
Attempt the normal Windows "Shut Down" procedure. If this
fails, press the power button for four or more seconds to turn
off the power. To restart the computer, press the power
button again.
Solution
Either format the media card in the digital camera or select FAT file
system to format the media card in a computer with Windows.
Solution
If using an SD card, make sure that the lock tab located on the right
of the SD card is not in the locked position. If using a Memory
Stick/PRO card, make sure that the lock tab located on the bottom
of the Memory Stick/PRO card is not in the locked position.
Solution
Check the manufacturer's documentation included with your card to
see if it writable. Refer to the previous section for a list of
compatible cards.
If using an SD card, make sure that the lock tab located on the right
of the SD card is not in the locked position. If using a Memory
Stick/PRO card, make sure that the lock tab located on the bottom
of the Memory Stick/PRO card is not in the locked position.
Solution
Ensure that the card is inserted properly with the gold contact on
the correct side. The green LED will light if inserted properly.
Solving media card reader problems
71
Hide quick links:
Advertisement
Table of Contents
