Panasonic EB-X300 Operating Instructions Manual
Part 1 digital cellular phone
Hide thumbs
Also See for EB-X300:
- Operating instructions manual (96 pages) ,
- Service manual (85 pages)
Related Manuals for Panasonic EB-X300
Summary of Contents for Panasonic EB-X300
-
Page 1: Mobile Phone
Operating Instructions Part 1 Digital Cellular Phone Mobile Phone Before operating this handset, please read these instructions (parts 1 and 2) completely. -
Page 2: Table Of Contents
Contents Getting Started ... 1 Your phone... 1 Key functions... 2 Displays... 4 Fitting and removing the battery ... 6 Fitting and removing the SIM ... 7 Charging the battery... 7 Battery level indicator ... 8 Low battery power warning ... 8 Symbols used in this manual... - Page 3 Network...97 Records Menu ... 98 Last dialled/Answered/ Unanswered number ...98 Deleting the records...99 Applications Menu ... 100 Calendar ...101 Scheduler...103 Notes ...105 Clock...106 Calculator...109 Currency ...110 Melody composer ...111 Phone Menu ...112 Accessory ... 113 CD-ROM ...113 Troubleshooting... 114 Important Error Messages ...
-
Page 4: Getting Started
Getting Started Your phone Camera Lens Lens Cover: Slide halfway down to activate the camera. Slide the cover all the way down to pop open the display. Navigation Key: Scroll/move through menus. Left Soft Key: Perform functions indicated in the lower left-hand corner of the display. -
Page 5: Key Functions
Key functions Navigation Key: Scroll or move through menus, text and phone numbers. In idle mode, press to activate the Shortcuts menus or press and hold Left Soft Key: Perform the functions indicated by text shown in the lower left-hand corner of the display. In idle mode, press to activate the Menu display, or press and hold to activate the Messages menu. -
Page 6: During A Call
During a call Minimal menu options are available during a call by pressing the following keys. Activate Hands free/Hand held, Conference call, Call transfer, End, Split, Contacts list, Messages menu, Call status. Put the call on hold or resume while connected to a calling party. Swap among calls while connected to two or more calling parties. -
Page 7: Displays
Displays Idle display Wallpaper Left Soft Key Selection Area Idle clock The clock appears on the display a few minutes after you press the last key. NOTE: All screen images in this manual are simulated. NOTE: Some services described in this manual are network dependent or may only be available on a subscription basis. -
Page 8: Status Icons
Status icons The status icons are displayed or animated according to the currently activated functions. The Antenna, Signal and Battery icons are displayed when the handset is switched on and connected to a network. If there is no network connection, the Signal icon will not be displayed. Icon Indicate the received signal strength Indicate the received signal strength and Line 1 is enabled. -
Page 9: Fitting And Removing The Battery
Fitting and removing the battery Before removing the battery, ensure that the phone is switched off and the charger is disconnected from the phone. Fitting the battery Remove the battery compartment cover. Insert the battery, ensuring the 3 gold contacts align with the 3 gold pins in the phone. Removing the battery Push and hold the release latch Getting Started... -
Page 10: Fitting And Removing The Sim
Fitting and removing the SIM The SIM is inserted under the battery. Fitting the SIM Ensure the gold contacts are facing downwards before sliding the SIM into the SIM holder. Charging the battery Connecting and disconnecting the Travel Charger The battery must be fitted in the phone before the charger is connected. Insert the Charging Connector into the socket at the base of the phone before connecting the charger to the mains outlet. -
Page 11: Battery Level Indicator
Battery level indicator Phone Status Phone on Phone off Low battery power warning When the battery power is low, a “Battery is low” message will be displayed. If this occurs during conversation, finish your call immediately. The power will automatically switch off after the warning tone. Fully recharge the battery. See “Charging the battery”... -
Page 12: Basic Operations
Basic Operations Switching the phone on/off 1. Press and hold for 2 to 3 seconds 2. The phone starts in idle mode 3. Press and hold again to switch the power off Making a call Ensure that the signal strength meter shows network coverage is available in the current area. -
Page 13: International Dialling
Last number dialling required phone number International dialling The international access code (+) and the destination country/region code should be entered, followed by the area code and phone number. 1. Press and hold code 2. Enter the area code and phone number NOTE: Many countries/regions include an initial “0”... -
Page 14: Answering A Call
Answering a call If “Any key answer” is on, In idle mode press any key except (See “Any key answer” on page 37.) Rejecting an incoming call: Press Ring volume: From My Phone Sounds > Volume required ringtone adjust the volume level One click mute on incoming call: To set the ringtone and the vibration off, (Mute) -
Page 15: In-Call Operations
In-call operations During a call, the following options are available by pressing (Hold). Hands free/Hand held You can switch the phone between hands free and hand held. During a call: (Menu) Hands free or Hand held Contacts list You can access the Contacts list that is stored in the SIM or in your phone. During a call: (Menu) Contacts list... -
Page 16: Making A Second Call
Hold You can put a call on hold. During a call: (Hold) To resume: (Retrieve) NOTE: Hold is network dependent. Making a second call During a call: 1. Enter the second phone number or select a phone number from the Con- tacts list (see “Contacts list”... -
Page 17: Incoming Call While On A Call
Incoming call while on a call NOTE: Call waiting must be on Call waiting is network dependent. During a call, you may receive another call. 1. To answer another call, To disconnect another call, 2. During a conversation with a second caller, the following options are availa- ble by pressing Conference To create a conference call, you must be connected to more than one call. -
Page 18: Call Status
You can select one of the calls to disconnect while in a conference call. During a call: (Menu) (Select) Split You can separate an individual from the active conference call. During a call: (Menu) Split (Select) NOTE: Split is network dependent. Call status Call status allows you to disconnect the line or put a call on hold with the active party. -
Page 19: Dtmf
Swap When you are connected to two calls, you can switch between the active call and the held call. During a call: (Swap) to switch to the other call on hold DTMF DTMF can be sent during a conversation. These are often used to access voice mail, paging and computerised home banking. -
Page 20: Text Entry
Text entry You can use alphanumeric characters to enter text: ® (T9abc, T9Abc, T9ABC) (Input language: English) A B C 2 - (a b c 2 -) & D E F 3 - (d e f 3 -) G H I 4 - (g h i 4 -) J K L 5 - (j k l 5 -) -
Page 21: T9 Text Input
Shift mode change In text entry mode, you can change mode by pressing and holding Multi tap Text entry mode change In text entry mode, to switch T9 mode on/off, press Auto capital change Auto capital affects Abc and T9Abc When the entry mode is changed to Abc or T9Abc, the first character is input as upper case and subsequent letters as lower case. -
Page 22: Other Text Modes
Note that the displayed words change as you type. Always type to the end of the word before editing. ® ® languages can be selected from T9 input – see “T9 input” on page 31. If the word you require is not in the internal dictionary, it should be entered using the Multi tap mode. -
Page 23: Menu Display
Menu Display NOTE: Menu display contents are dependent on your SIM. The menu system allows you to access functions which do not have their own dedicated buttons on the keypad. In idle mode (Menu) The main menu display has 9 menu options (see “Exploring the Menus”... -
Page 24: Exploring The Menus
Exploring the Menus The 9 main menus are as follows: My Phone My Media... 23 Sounds ... 26 Display ... 28 Language ... 31 Alerts ... 32 Profiles ... 33 Auto answer ... 37 Any key answer... 37 Auto key lock... 37 Shortcuts ... -
Page 25: My Phone Menu
My Phone Menu My Phone My Media Sounds Display Language Alerts Profiles Auto answer Any key answer Auto key lock Shortcuts Defaults My Phone Menu My Pictures...23 My Sounds...24 My Videos...24 User 1 ~ 4 ...25 Memory status ...25 Volume ...26 Ringtones ...27 Keytone ...27 Warning tone ...27... -
Page 26: My Media
My Media My Pictures Pictures taken by the built-in camera or images downloaded from the Internet are stored in the My Pictures folder. From My Phone My Media My Pictures required picture required option The following options are available after selecting the picture: - View - Send via MMS - Set as wallpaper... -
Page 27: My Sounds
My Sounds Downloaded sounds are stored in the My Sounds folder. From My Phone My Media My Sounds required sound required option The following options are available after selecting the sound: - Send via MMS - Set as ringtone - Rename - Copy - Cut - Paste... -
Page 28: Memory Status
User 1 ~ 4 You can also store your pictures, videos and sounds in the user defined folders: From My Phone My Media My Pictures, My Sounds or My Videos required file Copy User 1, User 2, User 3 or User 4 Memory status From My Phone My Media... -
Page 29: Sounds
Sounds Volume You can change the volume of the following events: - Other call - Contacts call - Alarm - Messages - Cell Broadcast - Group 1 ~ 10 From My Phone Sounds Volume required events adjust the volume level My Phone Menu (Select) (Select) -
Page 30: Warning Tone
Ringtones You can change the ringtones of the following events: - Other call - Contacts call - Alarm - Messages - Cell Broadcast - Group 1 ~ 10 From My Phone Sounds Ringtones required event Embedded melody, Downloaded melody or Composed melody required ringtone Keytone... -
Page 31: Display
Shutter sound The phone makes a shutter sound when you take a picture. From My Phone Sounds Shutter sound Shutter sound 1, 2, or 3 Display Wallpaper You can change the wallpaper on the idle display. From My Phone Display Wallpaper Default image, Download image... - Page 32 Greeting You can create a greeting message that is displayed each time the phone is switched on. From My Phone Display Greeting 3. Enter the greeting Animation You can change the animation that is displayed when the phone is switched on. From My Phone Display Animation...
-
Page 33: Colour Themes
Brightness You can adjust the brightness of the display. From My Phone Display Brightness Maximum, High, Medium, or Low Colour themes You can change the colour themes on the display. From My Phone Display Colour themes required colour theme Hide network name You can hide the network name which is shown in Idle mode. -
Page 34: Language
Language ® input When you create text, this function dramatically reduces the number of key presses. From My Phone Language T9 input required input type Display Languages It is possible to change the display language on your phone. From My Phone Language Display Languages required language... -
Page 35: Alerts
Alerts You can set your phone to ring and/or vibrate when you receive a call or message. From My Phone Alerts required alert The following options are available when a call or message is received: - Ring only - None - Ring &... -
Page 36: Profiles
Profiles Activating a profile You can switch between 6 different profiles in your phone, each with a distinct combination of alert method, ringtone, etc. Profiles are set up for use in different environments. From My Phone Profiles required profile Activate The following profiles are available: Normal Quiet... -
Page 37: Setting A Profile
Setting a profile You can customise a profile by changing the alerts, volume, keytone, warning tone, and/or brightness. Alerts: From My Phone Profiles required profile Change settings Alerts required alert The following options are available when a call or message is received: - Ring only - None... - Page 38 Volume: From My Phone Profiles required profile Change settings Volume required event adjust the volume level You can change the ring volume of the following events: (See “Sounds” on page 26 for details.) - Other call - Contacts call - Alarm - Messages - Cell Broadcast - Group 1 ~ 10...
- Page 39 Warning tone: From My Phone Profiles required profile Change settings Warning tone Brightness: From My Phone Profiles required profile Change settings Brightness Maximum, High, Medium or Low My Phone Menu (Select) (Options) (Select) (Select) > On/Off (Select) (Options) (Select) (Select) (Select)
-
Page 40: Auto Answer
Auto answer When you use the optional personal hands free earpiece, you can answer a call automatically. From My Phone Auto answer Any key answer Calls can be answered by pressing any key (except From My Phone Any key answer Auto key lock The Auto key lock is used to prevent any keys from being pressed accidentally e.g. -
Page 41: Shortcuts
Shortcuts It is possible to make the shortcut for the specific menu so that you can access the menu directly from Idle mode. From My Phone Shortcuts required menu Defaults All personal settings are returned to their factory default settings. From My Phone Defaults 2. -
Page 42: Contacts Menu
Contacts Menu Contacts Browse Create Groups Information number* Memory status My Numbers Hotkey dial My Contacts * Information number is SIM dependent. SIM ...40 Phone ...40 SIM ...44 Phone ...44 Group 1 ~ 10...46 ... 46 ... 47 ... 47 ... -
Page 43: Browsing The Contacts List
Browsing the Contacts list Viewing the Contacts list in your SIM/Phone You can search for a number in the Contacts list. From Contacts Browse > SIM or Phone required contact entry ➣ Enter a letter to find a contact beginning with the specific letter View Editing the Contacts list From Contacts... -
Page 44: Deleting A Contacts Entry
Deleting a Contacts entry From Contacts Browse > SIM or Phone required contact entry Delete 4. “Delete this entry?” Deleting all Contacts entries From Contacts Browse > SIM or Phone Delete all 4. “Delete all entries?” Copying the Contacts entries to your SIM/Phone From Contacts Browse >... - Page 45 Copying all Contacts entries to your SIM/Phone From Contacts Browse > SIM or Phone required contact entry Copy all to Phone or Copy all to SIM 4. “Copy all entries to phone?” or “Copy all entries to SIM card?” Sending as SMS From Contacts Browse >...
- Page 46 Sending as MMS From Contacts Browse > SIM or Phone required contact entry Send MMS required media to insert required option The following options are available when adding a required item to your MMS message: - Insert picture - Insert text - Insert video - Insert sound - Insert page...
-
Page 47: Creating A Contacts List
Creating a Contacts list Storing a Contacts entry in your SIM From Contacts Create 3. Enter the name 4. Enter the phone number ➣ “Saved in SIM card” is displayed. ➣ You can select the country code by pressing NOTE: The length and amount of data are SIM dependent. Storing a Contacts entry in your phone From Contacts Create... -
Page 48: From Contacts
➣ “Saved in phone” is displayed. ➣ You can select the country code by pressing ➣ The entries are grouped together and are retained even if you damage your SIM. Storing a Contacts entry in FDN: To store a fixed dial number, you need to enter your PIN2 code. The Fixed dial feature allows you to limit your outgoing calls to a certain set of numbers saved in FDN, which is located in your SIM. -
Page 49: Groups
Groups You can categorise the Contacts list stored in your phone into 10 groups. You can select a particular ringtone for each group to identify the incoming call. From Contacts Groups required group required option The following options are available: View Set ringtone Set image... -
Page 50: Information Number
Information number The Information number is sometimes included in a SIM which supports CPHS and Information Dialling Number. From Contacts Information number required information number NOTE: Information number is SIM dependent. Memory status Memory status shows how many locations are available in the Contacts list. -
Page 51: My Numbers
My Numbers My Numbers is a handy phone book where names and phone numbers can be stored and viewed. From Contacts My Numbers < Empty > Edit 4. Enter the phone number 5. Enter the name After storing My Numbers entries, you can view the entries by pressing The following options are available by pressing in step 2 when you select the required entry:... -
Page 52: Hotkey Dial
Hotkey dial Setting the Hotkey dial You can quickly dial phone numbers stored at locations 002 ~ 009 in the Contacts list. From Contacts Hotkey dial required Hotkey required Contacts entry 4. “Switch on hotkey setting” required Hotkey ➣ You must assign a required Contacts entry a Hotkey before switching the Hotkey on/off. -
Page 53: Games Menu
Games Menu Games Puddleland Quadball Exode To select the game: From Games Puddleland, Quadball or Exode Puddleland You cannot help falling in love with the cute little frog making his way by swallowing his enemies and spitting them out. Even the monsters are adorable. -
Page 54: Quadball
Quadball You direct the differently coloured bubbles, and they merge with bubbles of the same shape. To start the game: Press Key operation: Exode The ball bounces off the walls and the bar that you control. You pick up different objects that fall down when you destroy the “bricks”. -
Page 55: Browser Menu
Browser Menu Browser Start browser Bookmarks Settings Push setting Connectivity Browser Menu ... 54 ... 55 ... 53 Always all...56 Always none ...56 Always this specific SMS centre ...56 CSD settings...57 GPRS settings ...57 GPRS info...57... -
Page 56: Server Settings
Server settings The phone’s WAP (Wireless Application Protocol) Browser enables you to access Internet services supported by the network, such as news, weather reports, sports etc. Before Internet services can be accessed, you need to subscribe to your network operator or Internet service provider (ISP) to enable the relevant configuration information. -
Page 57: Starting The Browser
Those configuration options will be given by your network service provider. After completing the entry, press (Launch). The first time that the Browser is activated there will be no content stored so the Home URL content will be displayed (as defined by the network operator). -
Page 58: Bookmarks
Adding the Bookmark from the Browser menu From Browser Bookmarks required empty bookmark Edit 4. Enter the title and URL To bookmark Panasonic Box: Enter http://wap.panasonicbox.com in step 4, then press NOTE: Panasonic Box is network dependent. (Select) (Options) (Select) (Save) (Save). Browser Menu... -
Page 59: Push Setting
Adding the Bookmark to the home page From Browser Start browser 2. Press the Openwave icon Bookmarks Mark Site Viewing the Bookmark From Browser Bookmarks required bookmark Launch ➣ You can press step 2 after selecting the required bookmark. NOTE: This service is network dependent or may only be available on a subscription basis. -
Page 60: Connectivity
Connectivity You must set the data connections (GPRS and CSD settings) before setting the server information. From Browser Connectivity CSD settings, GPRS settings or GPRS info required setting 4. Edit the required information You can edit the following after selecting the required connection setting: CSD settings: - Server name... -
Page 61: Camera Menu
Camera Menu Camera Camera Video Camera Menu Camera Preview mode Video ...67 Self timer ...63 Twilight ...63 Close up mode ...64 Image size ...64 Brightness...65 Quality ...65 Special effects ...65 Frame ...66 Anti flicker ...66 Defaults ...66 Still Picture mode Viewfinder ...61 Send via MMS ...62 Set as wallpaper ...62... -
Page 62: Your Camera
Your camera (Left side view) Camera Lens Lens Cover: Slide the cover halfway down to turn the Camera Preview mode on. When the cover is in the uppermost position, the Camera Preview mode is off. When the cover is slid all the way down, the LCD pops open. -
Page 63: Taking A Picture
Taking a picture You can take pictures with the built-in camera and send them in multimedia (MMS) e-mail messages. You can also use them as wallpaper. Camera Preview mode: In Idle mode or from the Camera menu, slide the Lens Cover halfway down to launch the Camera Preview mode. -
Page 64: Still Picture Mode
Key functions in Camera Preview mode " $ ~ + Zoom In Camera Preview mode Press Viewfinder In Still Picture mode Viewfinder ➣ The viewfinder brings you back to the Camera Preview mode. Press to zoom in. Press to zoom out. Press to activate the camera function menu: Self timer, Twilight, Close up mode, Image Size, Brightness, Quality, Effect and Frame. -
Page 65: Send Via Mms
Sending the picture via MMS In Still Picture mode Send via MMS Send enter the required information Send Setting the picture as Wallpaper In Still Picture mode Set as wallpaper Viewing the stored picture In Still Picture mode View pictures required picture Camera Menu (Options) -
Page 66: Camera Settings
Camera settings Self timer The self timer delays shooting for 10 seconds. In Camera Preview mode Self timer On or Off Twilight You can turn the Twilight mode on when taking a picture in low light conditions. In Camera Preview mode Twilight On or Off (Options) -
Page 67: Close Up Mode
Close up mode You can turn the close up mode on when taking a picture at a close range. In Camera Preview mode Close up mode On or Off Image size You can make your picture larger or smaller. In Camera Preview mode Image size required image size The following image sizes are available:... -
Page 68: Brightness
Brightness You can adjust the brightness in 7 steps. In Camera Preview mode Brightness adjust the brightness Quality You can choose the image quality of your picture. In Camera Preview mode Quality Fine, Normal or Economy ➣ Fine produces a large file with a high resolution, while Economy produces a small file with a low resolution. -
Page 69: Frame
Frame You can take a picture with a frame of your choice. In Camera Preview mode Frame Off or Frame 1 ~ 5 ➣ If the image size is 176 × 144 pixels or larger, the frame will not appear. Anti flicker You can minimise flicker that appears on the screen by changing the anti flicker setting. -
Page 70: Recording A Video Clip
Recording a video clip While the Camera Preview mode is active, the camera can be switched to a video recorder. Video Preview mode: In Idle mode or from the Camera menu, slide the Lens Cover halfway down and press the Right Soft Key to launch the Video Preview mode. -
Page 71: Play
Recording In Video Preview mode Press the Shutter Key to start recording a video clip. Press the Shutter Key once more to stop recording a video clip. ➣ The quality of display images may vary depending on the object or environment. -
Page 72: View Videos
Viewing the stored video clips In Still Picture mode View videos required video clip (Options) (Select) (Select) Camera Menu... -
Page 73: Messages Menu
Messages Menu Messages Create Inbox Outbox User Messages Memory status Settings Connectivity Cell Broadcast Messages Menu MMS ...73 SMS...79 MMS ...75 SMS...80 MMS ...77 SMS...81 ... 81 MMS ...82 SMS...82 MMS ...71 SMS...78 CSD settings...82 GPRS settings ...82 Auto display ...83 Read Messages...83 Message List ...83 Topic list ...84... -
Page 74: Mms Settings
MMS settings Configuring MMS From Messages Settings Server list required server NOTE: Your network operator may have pre-installed this number. Do not change this number as it may cause failure of MMS messaging. Five server settings can be set up in the phone. If you find your server’s name under the settings option, select the server and (Edit). - Page 75 Setting the Send options From Messages Settings Send options required send option The following Send options are available: Delivery report Own address Validity period Priority Setting the Receive options From Messages Settings Receive options required receive option Messages Menu (Select) (Select) (Select) (Select)
-
Page 76: Creating An Mms Message
The following receive options are available when you want to decide how to deal with incoming MMS message: Normal Anonymous sender Advertisements Delivery report Creating an MMS message Inserting a multimedia file From Messages Create required insert option The following options are available to select the required multimedia file: - Insert picture... -
Page 77: Mms Options
MMS Options From Messages Create required insert option required file required option After completing an MMS message, you can select one of the following options: Send Store Delete items Info Page timing Delete page Preview page Preview MMS Messages Menu (Select) (Select) (Insert) -
Page 78: Sending An Mms Message
Sending an MMS message From Messages Create required insert option required file Send 8. Enter the phone number phone number Receiving an MMS message From Messages Inbox Waiting required MMS message the MMS message Received required MMS message (Select) (Select) (Insert) (Select) (Options) - Page 79 The following options are available by pressing after selecting the message you want to download in the waiting list in the Inbox: Download Delete Delete all The following options are available after selecting the message in the received list in the Inbox: Options View Messages Menu...
-
Page 80: Viewing An Mms Message In The Outbox
Viewing an MMS message in the Outbox From Messages Outbox Unsent messages or Sent messages required MMS message The following options are available after selecting the message in the unsent or sent messages list in the Outbox: Options View The following options are available by pressing when viewing the sent message in the Outbox: Forward Delete... -
Page 81: Sms Settings
SMS settings Message centre From Messages Settings Message centre 4. Enter your message centre number in the international dial- ling format page 10) You can also change the following settings in step 3: Protocol Validity period Delivery report SMS via GPRS Messages Menu (Select) (Select) -
Page 82: Creating An Sms Message
Creating an SMS message From Messages Create 3. Enter your text required option The following options are available: Send Save Save & send Picture & sound Format User Messages ➣ The number displayed in the menu bar indicates the number of pages used in the message. -
Page 83: Receiving An Sms Message
Receiving an SMS message From Messages Inbox required SMS message You can select one of the following options when you want to decide how to deal with the incoming SMS message: View Delete Reply Forward Edit Delete all Extract number Hyperlink Messages Menu (Select) -
Page 84: Viewing An Sms Message In The Outbox
Viewing an SMS message in the Outbox From Messages Outbox required SMS message Select one of the following options when you want to decide how to deal with the outgoing SMS message: View Delete Forward Edit Delete all Extract number Hyperlink User Messages You can edit the User Messages, then save them for later use. -
Page 85: Memory Status
Memory status From Messages Memory status MMS or SMS Memory status shows the free memory space and the used memory space of MMS, or the used memory space and the maximum memory capacity of SMS: - MMS: max. 2888 kb - SMS: max. -
Page 86: Cell Broadcast
Cell Broadcast You can receive your favourite information regularly from your service provider. You need to specify the “topic(s)” of information and the language in which you wish to receive this information. To receive the broadcasts, “Read Messages” must be on. Auto display In Idle mode, the latest information message is displayed on your phone automatically. -
Page 87: Topic List
Topic list You can receive messages on specific topics from your network service operator. From Messages Cell Broadcast Topic list Current 4. < Add topics > required topic You can delete the required topic in step 4. required topic Delete User defined topic You can add your favourite topics to the user-defined topic list. -
Page 88: Languages
Languages You can set the language of the message you receive. From Messages Cell Broadcast Languages Insert or Add to end required language You can remove a language in step 4. required language Delete ➣ “Insert” adds a required language above the language you select whereas “Add to end”... -
Page 89: Phone Menu
Phone Menu Phone Menu (or STK)* Call Service Call Diverts Security Network * STK (SIM Tool Kit) is SIM dependent. ** Line is SIM dependent. Phone Menu Time/Charge...87 Call waiting ...87 Withhold ID ...88 Caller’s ID ...88 Charge settings ...89 Line** ...90 All voice calls ...91 Not reachable ...91... -
Page 90: Call Service
Call Service Time/Charge From Phone Menu Call Service Time/Charge Last call, All voice calls or Cost left Last call All voice calls Cost left NOTE: Time/Charge is SIM dependent. Call waiting If Call waiting is switched on, a second call can be received. Activate this function before making a multi-party (conference) call. -
Page 91: Withhold Id
Withhold ID This function allows you to prevent showing your name and/or number to the calling party and enable if necessary. From Phone Menu Call Service Withhold ID 3. To confirm “Withhold for all calls?” select Yes or No NOTE: When checking the status, the phone must be registered to a network. -
Page 92: Charge Settings
Charge settings NOTE: The duration of one unit may vary between peak and off-peak times. Call charges can be calculated accordingly. However, the actual tariffs charged by your service provider may not be reflected in the calculation. Currency: Firstly, “Personal rate” must be entered. This is the cost that the service provider charges for one unit of call time. -
Page 93: Line
Max cost: You can set the maximum cost of calls allowed. From Phone Menu Call Service Charge settings Max cost ➣ The current setting is displayed. enter credit limit NOTE: This function is SIM dependent. Auto display: In idle mode, the cost of the last dialled call is displayed on your phone automatically. -
Page 94: Call Diverts
Call Diverts From Phone Menu Call Diverts required circumstance to initiate the divert Set, Clear or Check status 4. Enter the phone number to divert to ➣ Enter the voice mail centre number if you want incoming voice calls to be diverted to the voice mail centre. ➣... -
Page 95: Security
Security Call bar Call barring restricts certain outgoing and/or incoming calls using a password supplied by your service provider. When updating/checking the status of Call bar, the phone must be registered to a network. From Phone Menu Security Call bar required setting Set, Clear or Check status 5. -
Page 96: Codes
Codes Change phonecode: The phonecode is used for the SIM lock, which protects the phone from being used with a SIM other than yours. From Phone Menu Security Codes Change phonecode 4. Enter a new phonecode 5. Enter the new code to verify NOTE: Your phonecode must be 6 to 12 digits. - Page 97 Changing PIN/PIN2: You must enable the PIN before changing the code. From Phone Menu Security Codes Change PIN or Change PIN2 4. Enter the current code 5. Enter the new code 6. Enter the new code to verify NOTE: To enter the PUK code for your PIN, enter **05#. You will then be prompted to enter the PUK code.
-
Page 98: Fixed Dial
Fixed dial The Fixed dial feature allows you to limit your outgoing calls to a certain set of numbers saved in FDN, which is located in your SIM. When this function is on, only the Fixed dial numbers can be dialled, and any attempt to call any other number will fail. To enter Fixed dial numbers, see page 45. -
Page 99: Sim Lock
SIM lock Once you enable the SIM lock, you will be prompted to enter your phonecode when you switch on the phone with a different SIM inserted. From Phone Menu Security SIM lock 3. Enter the phonecode NOTE: Your phonecode must be 6 to 12 digits. You are advised to write down your phonecode. -
Page 100: Network
Network Network settings You can select a network that is available in your current location. From Phone Menu Network required network Auto network New network Network List Band Select NOTE: This function is SIM dependent. (Select) (Change) > On/Off Allow the phone to reselect a new network automatically in order to maintain optimum network availability. -
Page 101: Records Menu
Records Menu Records Last dialled Answered Unanswered Delete records Last dialled/Answered/ Unanswered number Recently dialled phone numbers will be stored in Last dialled (max. 50). If an incoming call with Caller's ID is answered, the number will be stored in Answered (max. 50). If an incoming call with Caller's ID is not answered, the number will be stored in Unanswered (max. -
Page 102: Deleting The Records
Deleting the records From Records Delete records Delete last dialled “Delete dialled calls?” is displayed. You can select one of the following options in step 2: - Delete last dialled - Delete answered - Delete unanswered - Delete all (Select) (Yes) or (No) (Select) -
Page 103: Applications Menu
Applications Menu Applications Calendar Scheduler Notes Clock Calculator Currency Melody composer (Phone Menu) Applications Menu ... 101 ... 103 ... 105 Settings...106 Alarm ...107 Power on time...108 Power off time...108 ... 109 Rate setting ...110 Rate compute ...110 ... 111 ... -
Page 104: Calendar
Calendar Creating a reminder You can organise your calendar to remind you of a personal event, such as a holiday period or birthday. You need to set the clock, day and time before entering anything in the calendar. From Applications Calendar 2. - Page 105 Weekly, Monthly or Annually 9. Enter the start date 10. Enter the start time 11. Enter the end date 12. Enter the end time NOTE: Ensure that Calendar settings will not contravene any regulations by switching on automatically when in an aircraft, medical facility, etc.
-
Page 106: Scheduler
required schedule required option You can select one of the following options in step 5: - View - Activate/Deactivate - Edit - New entry - Delete - Delete all - Capacity ➣ Active/Deactive options are available only before the scheduled day arrives. Scheduler Creating a schedule From Applications... - Page 107 Viewing the schedule From Applications Scheduler required entry View Editing the schedule From Applications Scheduler required entry Edit ➣ To edit the schedule, please see step 3 ~ 10 in “Creating a schedule” on page 103 for details. Deleting schedule entries From Applications Scheduler required entry...
-
Page 108: Notes
Capacity From Applications Scheduler required entry Capacity ➣ You can view the maximum number of entries and the remaining number of entries available. Notes You can enter text to remind yourself of special events From Applications Notes <New entry> 3. Enter text ➣... -
Page 109: Clock
Clock Clock settings Display time: You can show the time on the display in Idle mode. From Applications Clock Settings Display time Time zone: Before setting the time and date, set the time zone of your region. When travelling abroad, your home time can be changed to your destination time. -
Page 110: Alarm
Date format: You can select the desired display format for the date. From Applications Clock Settings Date format required format Time format: You can select the desired display format for the time. From Applications Clock Settings Time format 12 hours or 24 hours Alarm You can set the alarm to sound or vibrate when the set time is reached. -
Page 111: Power On Time
7. Enter the description ➣ The alarm set indicator appears on the idle display. ➣ If you are on a call, the phone will vibrate without sound. Ending the alarm: Press any key or (Pause) to pause the alarm and start again after 5 minutes NOTE: Ensure that Alarm settings will not contravene any regulations by switching on automatically when in an aircraft, medical facility, etc. -
Page 112: Calculator
Calculator You can use the 4-function calculator (addition, subtraction, multiplication and division) to make simple arithmetic operations. From Applications Calculator 2. Enter a number (max. 8 digits) ➣ If a decimal point is required, press needed, press select the arithmetic operation 4. -
Page 113: Currency
Currency Rate setting The currency converter enables you to convert from/to a home currency using a conversion rate that you enter. Before beginning conversions, choose a base currency and enter the conversion rate. The base currency rate is set to 1. From Applications Currency Rate setting... -
Page 114: Melody Composer
Melody composer Composing a melody From Applications Melody composer required melody Melody composer required track 5. Compose your melody – see the notes chart below Save Using the following table as a reference, enter notes (from the choice of low, middle and high), rests, and duration of each, to generate your composition. -
Page 115: Phone Menu
Playing the composed melody To play the composed melody before saving: (Options) > Changing the tempo To change the tempo of the composed melody: required tempo Selecting the instrument To select the instrument to play the composed melody: required instrument Phone Menu This menu is available under the Applications Menu if your SIM card provides STK services. -
Page 116: Accessory
PC and synchronise it back to the phone. This information includes contacts, messages and the image or sound data held in your X300. For further information please refer to the documentation on the CD-ROM, or to the Panasonic website www.panasonicmobile.com. Future enhancements to X300 Handset Manager 1. -
Page 117: Troubleshooting
Troubleshooting Should any problem persist, contact your dealer. Problem Phone will not switch Extremely short The network you are battery life for a new using and the battery. condition of the battery can affect battery life. Short battery life for an The battery has worn old battery. - Page 118 Problem Calls cannot be made. The phone is locked. Outgoing calls are barred. The phone is not registered to a network. Calls cannot be made from Fixed Dial Store. Calls cannot be The phone is not received. switched on. Incoming calls are barred.
-
Page 119: Important Error Messages
Important Error Messages These are some of the most important error messages which may be displayed: Please insert SIM card SIM card is not inserted, or is not inserted correctly. Please insert the SIM card correctly. New codes not same When you change your password, you must enter the new password twice to confirm. - Page 120 SIM memory full! The SIM storage area for SMS message is full. Please delete Please delete old old messages. message! SIM memory full! The SIM storage area is full. If you continue, data may be lost. Please delete old records. Continue? Phone memory full! The data storage area is full.
-
Page 121: Glossary Of Terms
Glossary of Terms Abbreviated Dialling Number. Used for frequently called numbers. Access Point Name. Directs the user to the gateway or the required service. Circuit Switched Data. A communication method used to transmit data over telephone connections. DTMF Dual Tone Multi-Frequency allows you to communicate with computerised phone systems, voice mailboxes, etc. - Page 122 Service Dialling Number. This number enables you to access special services provided by your network operator, such as customer support, emergency services, etc. Service Provider The organisation responsible for providing access to the GSM/ GPRS network. Subscriber Identity Module. A small smart-card which stores unique subscriber and user-entered information such as Contacts entries and SMS messages.
-
Page 123: Index
Index Accessory ... 113 Alarm ... 107 Alerts ...32 Animation ... 29 Answer ... 37 Any key answer ... 37 Auto answer ... 37 Applications Menu ... 100 Auto capital change ... 18 Auto key lock ... 37 Battery ... 6 Charging ... - Page 124 Rate compute ...110 Rate setting ...110 Defaults ...38 Dialling ...9 International dialling ...10 Last number dialling ...10 Display ... 1 DTMF ...16 Earpiece ...1 Earpiece volume ...9 Emergency call ...10 Error Messages ...116 Exode ...51 FDN ...45 Fixed dial ...95 Games Menu ...50 Glossary of Terms ...118 Greeting ...29...
- Page 125 Phone Menu ... 86 Phonecode ... 93 Picture ... 60 My Pictures ... 23 Sending via MMS ... 62 Setting as Wallpaper ... 62 Taking ... 60 Viewing the stored picture ... 62 PIN Control ... 93 PIN/PIN2 ... 94 Profiles ...