Memory; Figure 1-5 Desk-Side Cover Removal - HP j6700 Getting Started Manual
Hp j6700: quick start
Hide thumbs
Also See for j6700:
- Service handbook (152 pages) ,
- Upgrade instructions (31 pages) ,
- Installation manual (9 pages)
Table of Contents
Advertisement
NOTE
Figure 1-5
Memory
The main memory for an J6700 workstation can vary from a minimum of
1 GBytes to a maximum of 16 GBytes. This workstation has sixteen
memory card slots.
You must install only matched pairs of 512 MByte and 1 GByte DIMM
cards in these slots (for example, slots 0A and 0B).
To install DIMM cards in your workstation, follow the subsequent
procedure. Also, see Figure 1-5.
1. Turn your workstation off and unplug it.
2. Remove your workstation from its pedestal and lay it on a soft
anti-static surface with the model name and HP V
upright position. See Figure 1-1. (Desk side only)
3. Grasp both ends of the bezel and pull outward from the workstation
to remove it.
4. Unscrew the captive screw located above the Liquid Crystal Display.
5. Pull forward on the cover and lift it off the workstation.
6. Follow the loading sequence located inside the J6700. Also, see Figure
1-6.
Desk-side Cover Removal
Cover
Pedestal
Chapter 1
System Overview
text in the
ISUALIZE
Captive Screw
Bezel
LCD
Memory
27
Advertisement
Table of Contents
Troubleshooting
