Table of Contents
Advertisement
Quick Links
Traditional Fire Gas 800-1000-1200
Note: Flue System Casing
Flue system may require to be double
lined to comply. Refer to
ASNZS:2918:2001 4.3 Flue pipe
casing.
NOTE : Traditional open fires are the least efficient fires available and can lack in heat output.
Visit
www.warmington.co.nz
Fire, flue system and instructions to comply with ASNZS 2918:2001 & Building Code C/AS1 7.5 Open Fires
Keep these instructions for further reference. Ensure that you have the correct and current installation details for the Warmington Fire.
The Warmington unit is to be installed by a certified Warmington installer or an approved NZHHA installation technician.
Read all the instructions carefully before commencing the installation. Failure to follow these instructions may result in a fire hazard and void the warranty.
Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification.
1
Traditional Brick Built Open Gas Fire & Gas Burner
Installation and Operating Instructions
for specs, DWGs and PDF uploads of fires
Installation
IMPORTANT
All dimensions are in mm
Copyright
5 September 2019
Note: Brick Out Guide
Details
When purchasing the fire bricks, the
bricking guide will come with the
bricks.
Advertisement
Table of Contents
Related Manuals for Warmington TFG 800
Summary of Contents for Warmington TFG 800
- Page 1 DWGs and PDF uploads of fires Fire, flue system and instructions to comply with ASNZS 2918:2001 & Building Code C/AS1 7.5 Open Fires Keep these instructions for further reference. Ensure that you have the correct and current installation details for the Warmington Fire. Installation The Warmington unit is to be installed by a certified Warmington installer or an approved NZHHA installation technician.
- Page 2 Gas & Electrical Work Onsite Fire / Flue kit / Flashing Installation Installation of Brickwork Council Permit Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm Copyright...
-
Page 3: General Information
GENERAL INFORMATION Like the traditional brick back fires of yesteryear, the Warmington Traditional Fire is built with the experience and techniques of the past. These make a grand statement in the home. However, they can lack in efficiency. The gas version of the traditional fire benefits from the aesthetic appeal of a brick backed fire, while remaining convenient and simple to use. -
Page 4: General Requirements
All gas fires requiring Warmington Flue Systems shall be installed to the requirements of the current standards and shall be appropriately designed and constructed to permit safe and effective use. This appliance must be flued to the outside atmosphere. All Warmington fires must be Installed with a minimum of 3.6m of approved Warmington gas flue and liners. -
Page 5: Remote Control
5 September 2019 Your purchase of the Warmington traditional fire gas burner (included in the price of the firebox) comes with multiple options for lighting/ heat settings. The most affordable option is the ‘SG’ option, which is a manual start, manual adjustment option, working much like a barbeque. -
Page 6: Installation
• All new installations require a permit. • For special requirements concerning materials (timber mantle and surrounds) within close proximity of Warmington products, please contact your local Warmington technical consultant or designated installer. STAGE 1: FRAME CONSTRUCTION PROCEDURE FOR BUILDER •... - Page 7 1.4 PLAN, FRONT ELEVATION & CROSS SECTION Note: 50mm clearance from the flue liner to timber framing is required Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm Copyright...
- Page 8 Venting to external air recommended. Cut holes in block structure as required. AAC heat cell Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm Copyright...
- Page 9 Caitec system and cavity venting. Venting to external air recommended. Cut holes in block structure as required. Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm Copyright...
- Page 10 The figures below show different pattern styles that are bricked with the standard brick size of 230 x 115 x 75mm. Herring Bone Pattern Stretcher Bond Pattern Stack Bond Pattern Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm Copyright...
- Page 11 Locating the vents flush with the profile of the base of the firebox (or close to) is sufficient. For the Warmington Traditional Gas fire, an additional artificial brick is supplied which is to be installed in the place of one of the bricks in the centre of the fireback.
- Page 12 *Note: If plastering the Heat Cell structure, it is recommended to use a fibreglass mesh with a latex plaster to minimise the chance of the plaster cracking. (See your plasterer for correct materials and applications). Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm...
-
Page 13: Gas Specifications
The smaller pieces can cause uneven burn and the unit to run dirty. Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm... - Page 14 3.4 COALS AND LOGS Care should to be taken when handling coals & logs due to the carbon on the coals, which can stain the surroundings. Warmington suggests wearing gloves when handling the coals and logs, and using metal tongs when hot.
- Page 15 During the initial burn period, some smoke and smell may be experienced. Because of this, run the appliance on the high position in a well ventilated room until these dissipate. Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm...
- Page 16 5 September 2019 Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm Copyright...
- Page 17 During the initial burn period, some smoke and smell may be experienced. Because of this, run the appliance on the high position in a well ventilated room until fumes dissipate. Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm...
- Page 18 5 September 2019 Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm Copyright...
- Page 19 WARNING: To ensure the correct operation of the modulator it is necessary that the plastic cap is returned to its original location. Modulator Harness Connections DIAGRAM B Screw B Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm Copyright...
- Page 20 During the initial burn period, some smoke and smell may be experienced. Because of this, run the appliance on the high position in a well ventilated room until the fumes dissipate. Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm...
- Page 21 5 September 2019 Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm Copyright...
- Page 22 Clean and or touch up paint of fire box and burner • Hand over to client, tests to comply to relevant standards Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm Copyright...
-
Page 23: Hearth Clearances
(dimension A) of 380mm must be main- tained. This is for all traditional fire models. Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm Copyright... - Page 24 “Chimney Chase Flashing”. A “Venting Flashing cone” and a 25mm gap around the Liner with a “Venting Flashing Cone-Spider” can be used. Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm...
- Page 25 Test Report Number Date of Report 04/1039 July 2004 04/1040 July 2004 04/1041 July 2004 Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm Copyright...
- Page 26 CHIMNEY CHASE FLASHING AND AIR VENTILATION OP- TIONS VENTING THROUGH CHIMNEY CHASE “No Insulation “Insulation under VENTING THROUGH FLASHING under flashing” flashing” Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm Copyright...
- Page 27 FRAME OUT AND TRIM OUT DETAILS FOR CHIMNEY CHASE Option X – Singled Lined Flue System Option Y – Double Lined Flue System Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. All dimensions are in mm Copyright...
-
Page 28: Additional Information
Warmington Industries recommend annual servicing of your gas fire by an approved Warmington gasfitter. Clean the bricks of the fire using a stiff brush as required. Warmington does not recommend using water or a wet cleaning product due to the porous quality of the bricks.