Table of Contents
Related Manuals for Panasonic WX-CT2020
Summary of Contents for Panasonic WX-CT2020
-
Page 1: Operating Instructions
SAMPLE (2nd draft) This is NOT the final draft. Order Taker Unit Operating Instructions WX-CT2020 Model No. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. - Page 4 STANDARD ACCESSORIES ........................13 OPTIONAL ACCESSORIES ........................13 INTRODUCTION Panasonic WX-CT2020 Order Taker Unit is designed for the use in Panasonic Wireless Communication System. Using with WX-C1027A Headset (option), you can communicate by voice with other store personnel and the customer. FEATURES •...
-
Page 5: Names & Functions
NAMES & FUNCTIONS WX-CT2020 o !0... - Page 6 q Battery Lock [EJECT] i Power Button When removing the battery, slide out the lock. Pressing this button for one second will turn the order When loading a new battery, insert the battery until the taker unit on or off. lock clicks.
-
Page 7: Battery Loading & Replacement
BATTERY LOADING & SETUP PROCEDURES REPLACEMENT Caution: Setup of this product should only be performed Notes: by qualified service personnel or system installers. • Refer to the operating instructions included with the battery and battery charger. • Prepare a fully charged battery. ●... -
Page 8: Channel Group Selection
● Channel Group Selection SW#2: OFF SW#3: OFF You can select a channel group by setting the channel SW#4: OFF selector, which is the rotary switch inside the switch pocket. SW#5: OFF 1. Press the power button to turn off the order taker unit. SW#6: This switch selects the mode of Tone Squelch method. -
Page 9: Operation Mode Setup
● Operation Mode Setup Three operation modes can be set up to adapt the order taker unit to your requirements. (Refer to the diagram for details.) • Default channel and A/B Button Enable/Disable setup • Talk lock/ Talk PTT • Page lock/Page PTT Note: The next page describes how to set up the order taker unit. - Page 10 1. Press the power button to turn off the order taker unit. Power button 2. While holding down the buttons T and P simultaneously, Power on. press the power button to turn on the order taker unit. The order taker unit enters the setup mode where the Keep holding down.
-
Page 11: Operating Procedures
● Communications with Other Store OPERATING PROCEDURES Personnel (PAGE) Store personnel wearing the headset can communicate ● Communications with Customers with each other without being heard by customers. (TALK) Any store personnel wearing the headset can communicate <When the Page Lock mode is preset> bidirectionally with any customer who is at the menu board. -
Page 12: When Disconnecting The Headset Plug
WHEN DISCONNECTING THE HEADSET PLUG When disconnecting the headset plug from this product, pull the plug straight, holding the resin-molded part. Pull the plug straight, holding this part. Do not hold the cable or pull the resin-molded part up and down. -
Page 13: Troubleshooting
TROUBLESHOOTING Phenomenon Possible Cause What to do The power indicator blinks in red. A wrong channel is selected. Select any of channels 1 through 8. (The channel selector is set to the If no remedy exists, consult your dealer wrong position. Refer to p. 7.) for repairs. -
Page 14: Specifications
SPECIFICATIONS Operating Frequency: UHF/FM Type of Radio Wave: Required Power Supply: Rechargeable Ni-MH Battery, 3.6 V DC Control Function: Power (On/Off) Volume (Up/Down) Talk Page Channel Selection (A/B) Channel Group Selection (1-8) DIP Switch Setup (8 bit) Dimensions: 139 mm (W) x 63 mm (H) x 26 mm (D) {5-1/2 in. - Page 15 Security Systems Group PANASONIC SALES COMPANY www.panasonic.com/cctv DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO INC. Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina, Zone Office P.R. 00985 (809)750-4300 Eastern: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303 Central: 1707 N.Randal Road, Elgin, IL 60123 (847) 468-5205...