Page 1 Order Number: MGCS020301C0 Facsimile DX-600 / 800 WARNING This service information is designed for experienced repair technicians only and is not intended for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Page 2 This Product Uses Lead (Pb) Free Solder Printed Circuit Boards (PCBs). Information regarding Lead-Free (PbF) solder; Distinction of PbF PCB: PCBs (manufactured) using lead free solder will have a mark following the PCB part numbers in a label on the PCB. Caution: Pb free solder has a higher melting point than standard solder;...
Page 3: Table Of Contents
Table of Contents Specifications Table ........ 5 4.9. Diagnostic Codes (For Facsimile) ..147 1.1. Fax Function ..........5 Service Modes ........154 1.2. Internet Fax Function......13 5.1. Service Modes (For Facsimile) .... 154 1.3. Printer Function ........15 1.4. External View..........17 System Description ......
Page 4 Table of Contents 8.8. Connecting the Telephone Line Cable and Power Cord ........290 8.9. Setting the Internet Parameters ... 291 8.10. Programming or Retrieving Parameters via Email......294 8.11. Customizing Your Machine ....311 Options and Supplies......319 Options and Supplies......319 Installing Optional 250 Sheet Paper Cassette (UE-409070) ......
Page 5: Specifications Table
DX-600/800 1 Specifications Table 1.1. Fax Function Description Items Remarks UF-590/790 DX-600/800 (Reference) Main Specifications ITU-T Std. & Non-Std. 1 Compatibility (MGCS) 2 PSTN Line Port 3 Leased Line Port 4 V.24 Line Port 5 Modem Speed 33.6 - 2.4 kbps...
Page 6 DX-600/800 Description Items Remarks UF-590/790 DX-600/800 (Reference) *For USA and Canada only, documents must be inserted by staggered feed (stairs-shape). Face Down, A4 / Letter; 50 sheets* 0.0024 - 0.0039 in, 12 - 16 lb Bond (0.06 - 0.10 mm,...
Page 7 DX-600/800 Description Items Remarks UF-590/790 DX-600/800 (Reference) Copy Quality 64-Level Error Diffusion 1 Halftone (Tx) Yes* * Halftone (S-Fine) only with the Resolution key Super Fine (Tx & Rx) 406 x 391* * Interpolated 16 pels/mm dpi x lpi (16 x 15.4)
Page 8 2 / 4 / 8 MB 3 Page Memory D-RAM 4 Battery Backup 72 hours G3 Optional Communication Port Specific Destinations only. 6 Handset New Option for DX-600 / 800 / UF-590 / 790. 7 V.24/Encryption Interface 8 PDL Edition 1.0 APR 2002...
Page 9 DX-600/800 Description Items Remarks UF-590/790 DX-600/800 (Reference) Parallel Port Interface Standard LAN (Network) *Ethernet 10Base-T / Standard* 100Base-Tx Printer Interface (GDI) Standard Standard Scanner Interface (TWAIN) Standard Class 2 Fax Modem Standard Interface PC Fax Interface (MGCS) Standard PC Fax Interface...
Page 10 DX-600/800 Description Items Remarks UF-590/790 DX-600/800 (Reference) 15 Pulse / Tone Dialing 10 pps / DTMF 16 Pulse to Tone Change 17 Flash Key Handset or External 18 External Telephone Jack Telephone Transmission Features 1 Direct Transmission ADF Transmission 2 Memory Transmission...
Page 11 DX-600/800 Description Items Remarks UF-590/790 DX-600/800 (Reference) Polling 1 Polling 2 Turnaround Polling 3 Multi-Station Polling Yes (Max.144) 4 Deferred Polling Max. 10 timers Deferred Multi-Station Yes (Max.144) Max. 10 timers Polling 6 Direct Polling Tx 7 Memory Polling Tx...
Page 12 DX-600/800 Description Items Remarks UF-590/790 DX-600/800 (Reference) Identifications 1 Logo 25 Characters 2 Multiple Logo 3 Character ID 16 Characters 4 Numeric ID 20 Digits Special Communications 1 Password XMT / RCV Closed Network 2 Selective Reception TSI Check 3 Relay XMT Request...
Page 13: Internet Fax Function
DX-600/800 1.2. Internet Fax Function Description Items Remarks DX-600/800 Main Specifications 1 Communication Protocols TCP / IP SMTP / MIME 2 Coding Scheme MH / MMR 3 Line Interface RJ-45 (Ethernet) Ethernet LAN Scanner Mechanism 1 Max. Document Size A4, Letter, Legal 8 x 3.85...
Page 14 Win 98 / Me 8 Secondary DNS 9 DHCP Client Lightweight Directory Access Protocol 10 LDAP (Directory Services) Certainty Email from RCV side to Panasonic 1 Comm. Journal (w / Image) I-Fax’s only. 1 Email Address Edition 1.0 APR 2002...
Page 15: Printer Function
DX-600/800 1.3. Printer Function Remarks Description Items UF-590/790 DX-600/800 (Reference) Interface Centronics Parallel I/F Standard* *ECP Mode (IEEE-1284) 2 LAN (Network) *Ethernet 10Base-T / Standard* 100Base-Tx 3 USB Port 4 IEEE-1394 Printer Function 1 Printing Size Letter / A4 / Legal...
Page 16 DX-600/800 Remarks Description Items UF-590/790 DX-600/800 (Reference) Scanning Function 1 Halftone 64 Level Error Diffusion Letter size for USA and 8.3 in (212 mm) Canada 2 Scanning Width 8.2 in (208 mm) A4 size for Other Destinations 3 Scanning Resolution...
Page 17: External View
DX-600/800 1.4. External View (For USA only) Product complies with DHHS Rules 21 CFR Subchapter J in effect at date of manufacture. Manufacturer's name and address Factory ID 3 inch 14.6 inch (370 mm) (75 mm) 7 inch L TR : 4.8 inch 13.2 inch...
Page 18 Model Number and Destination Code (Main Unit) 3-Digit number or alphanumeric representation (Except Letters “I” and “O”) For Example: 2MT = DX-600-EB 2MS = DX-800-AU Production Facility Production Year Starting with Year 2001, the last 2-digits of the year is...
Page 19: Control Panel
DX-600/800 1.5. Control Panel For USA and Canada DX-800 TEL NO. SYMBOL SHIFT SPACE For Other Destinations DX-600 Edition 1.0 APR 2002...
Page 20: Disassembly Instructions
DX-600/800 2 Disassembly Instructions 2.1. General Disassembly Flowchart Edition 1.0 APR 2002...
Page 21: Disassembly Instructions
DX-600/800 2.2. Disassembly Instructions Power Cord (1108), Telephone Line Cable (1109), LAN Cable, Recording 2.2.1. Paper Tray Assembly (1107), Paper Cassette (1) Disconnect the Power Cord (1108). (2) Disconnect the Telephone Line Cable (1109). (3) Disconnect the LAN Cable. (4) Remove the Recording Paper Tray Assembly (1107).
Page 22 DX-600/800 2.2.2. Left Cover (103), Right Cover (102), Front Cover (104), Speaker (117), Separation Rubber (207) (1) Open the Printer Cover (106). (2) Open the Control Panel Unit. (3) Remove 3 Silver Screws (B1). (4) Remove the Left Cover (103).
Page 23 DX-600/800 (10) Remove 2 Silver Screws (B1). (11) Remove the Right Cover (102). (11) (10) (12) Release 3 Latch Hooks. (13) Remove the Front Cover (104). (12) (13) <Replacing & Cleaning the Separation Rubber> (1) Open the Control Panel Unit.
Page 24 DX-600/800 2.2.3. Control Panel Unit, PNL1 PC Board (1004) (1) Open the Printer Cover (106) (2) Slightly open the Control Panel Unit. (3) Remove the Left Cover (103) and the Right Cover (102). (Refer to 2.2.2.) (4) Disconnect Connector CN14 on the SC PC Board.
Page 25 DX-600/800 2.2.4. Transmit Guide (301) Assembly, Scanning Glass (308) (1) Remove the Left Cover (103), Right Cover (4)x4 (102), and Front Cover (104) (Refer to 2.2.2.). (2) Remove the Control Panel Unit (Refer to 2.2.3.). (3) Release the Harnesses from the clamps.
Page 26 DX-600/800 2.2.5. Stamp Assembly, Stamp Solenoid (327) (1) Remove the Transmit Guide (301) Assembly (Refer to 2.2.4.). (2) Remove the Stamp Assembly (325, 326). (3) Remove 1 Screw (19). (4) Remove the Stamp Solenoid (327). Edition 1.0 APR 2002...
Page 27 DX-600/800 2.2.6. Eject Roller (303) (1) Remove the Transmit Guide (301) Assembly (Refer to 2.2.4.). (2) Remove the Stamp Assembly (325, 326) (Refer to 2.2.5.). (3) Release 2 Latch Hooks. (4) Remove the Ground Plate (317). (5) Release the Latch Hook by using a small Blade- tip Screwdriver.
Page 28 DX-600/800 (10) Remove 2 P6A Bushings (316). (10) (11) Remove the Eject Roller (303). (11) Edition 1.0 APR 2002...
Page 29 DX-600/800 2.2.7. Transmit Motor (324) (1) Remove the Transmit Guide (301) Assembly (Refer to 2.2.4.). (2) Remove the Stamp Assembly (325, 326) (Refer to 2.2.5.). (3) Disconnect the Connector (1020) from the Transmit Motor (324). (4) Remove the ADF Gear (305) and ADF Angular Shaft (338).
Page 30 DX-600/800 2.2.8. Scanner Block (321), Mirror 1 (334), Mirror 2 (335), Mirror 3 (336), ADF Roller (331) (1) Remove the Transmit Guide (301) Assembly (Refer to 2.2.4.). (2) Remove the Stamp Assembly (325, 326) (Refer to 2.2.5.). (3) Remove 1 Screw (19).
Page 31 DX-600/800 2.2.9. LED Array (329), Feed Roller (302) (1) Remove the Scanner Block (321) (Refer to 2.2.8.). (2) Remove the Ground Plate (317). (3) Remove 4 Screws (19). (4) Release the Harness from the hook. (5) Remove the LED Bracket (306) Assembly.
Page 32 DX-600/800 2.2.10. LANB PC Board (1036), SC PC Board (1001), ILS PC Board (1006), SNS4 PC Board (1007) (1) Remove the Left Cover (Refer to 2.2.2.). (2) Remove 1 Screw (19). (3) Release 2 Locking Spacers (431) and remove the LANB PC Board (1036).
Page 33 DX-600/800 2.2.11. Paper Feed Solenoid (531), Clutch Gear Assembly, Paper Feed Roller (518) (1) Remove the Right Cover (102) (Refer to 2.2.2.). (2) Remove 1 Screw (19). (3) Remove the Paper Feed Solenoid (531). Note: If the Paper Feed Solenoid does not work properly due to dust, etc.
Page 34 DX-600/800 (11) Remove 2 Screws (4N). (12) Remove the Paper Feed Rollers (518). (11) (12) Edition 1.0 APR 2002...
Page 35 DX-600/800 2.2.12. Printer Cover (106), Rear Cover (105), Printer Motor (626) (1) Remove the Left Cover and the Right Cover (Refer to 2.2.2.). (2) Release the hooks and remove the Printer Cover (106). (3) Remove 2 Silver Screws (B1). (4) Remove the Rear Cover (105).
Page 36 DX-600/800 2.2.13. LANC PC Board (1037), MJR PC Board (1003), Power Supply Unit (1002) (1) Remove 2 Screws (19). (2) Remove the LANC PC Board (1037) Assembly. (3) Disconnect the LANB-LANC Harness (1038). (4) Remove 2 Screws (C8). (5) Remove the LANC PC Board (1037).
Page 37 DX-600/800 (11) Remove 5 Screws (19). (12) Remove the L Power Plate (401). (11)x5 (12) (13) Disconnect the Connectors (CN101, 102, 103, (13) 201 and 202) on the Power Supply Unit (1002). (14) Remove 4 Screws (19). (15) (15) Remove 1 Screw (19) and 1 Washer (G8).
Page 38 DX-600/800 2.2.14. Fuser Unit, Thermistor Assembly (728) (1) Remove the Rear Cover (Refer to 2.2.12.). (2) Remove 1 Screw (19). (3) Remove the Fuser Top Cover (733). (4) Disconnect the Connectors CN85 and CN87 on the SNS4 PC Board (1007).
Page 39 DX-600/800 2.2.15. Fuser Lamp (732), Exit Roller (719), Fuser Roller (709), Pressure Roller (706) (1) Remove the Rear Cover (Refer to 2.2.12.) and the Fuser Unit (Refer to 2.2.14.). (2) Remove 1 Screw (4N). (3) Remove the PSU-Fuser Harness (1028) and Fuser Lamp Terminal B (731).
Page 40 DX-600/800 (10) Remove 2 Pressure Springs (708). (10) (11) Remove the E14 Gear (714). Caution: You may need to use force to pull out the Gear. (14) (12) (12) Remove the 2 E18 Gears (713). (13) Remove 2 C-Rings (712).
Page 41 DX-600/800 (19) Remove 2 P6L5.5 Bushings (707). (20) Remove the Pressure Roller (706). Caution: Do not scratch the surface of the Pressure Roller when removing or reinstalling it. (20) (19) Edition 1.0 APR 2002...
Page 42 DX-600/800 2.2.16. Rear Chassis (505), SNS1 PC Board (1008) (1) Remove the Power Supply Unit (Refer to 2.2.12.). (2) Remove the SC PC Board (Refer to 2.2.12.). (3) Remove the Fuser Unit (Refer to 2.2.14.). (4) Remove 6 Screws (19).
Page 43 DX-600/800 2.2.17. Transfer Guide (601) Assembly, Feed Roller (526) (1) Remove the Rear Chassis (Refer to 2.2.16.). (2) Remove 2 Screws (C8). (3) Disconnect Connector CN80 on the SNS1 PC Board (1008). (4) Remove the Transfer Guide (601) Assembly. (5) Remove the 2 Snap Rings. (B9).
Page 44 DX-600/800 2.2.18. Toner Sensor (513), Laser Unit [LSU] (512), SNS3 PC Board (1009) (1) Remove the Transmit Guide Assembly (Refer to 2.2.4.). (2) Remove 2 Screws (19). (3) Remove Ground Wire (542). (4) Remove the CCD Shield Plate (533). (5) Remove 1 Screw (19).
Page 45 DX-600/800 (10) Disconnect 2 Connectors on the Laser Unit (11)x4 (12) (11) (11) (512). (11) Remove 4 Screws (1Y). (12) Remove the Laser Unit (512). (10) (13) Disconnect Connectors CN83 and CN84 on the SNS3 PC Board (1009). (14) Remove 1 Screw (19).
Page 46 DX-600/800 2.2.19. Bias Transfer Roller (604) (1) Remove the CCD Shield Plate (Refer to 2.2.18.). (2) Remove 2 Screws (19). (3) Remove the BTR Guide (602). (4) Release the Latch Hook on the Transfer Guide Black (601) Assembly as illustrated and remove the Bias Transfer Roller (604).
Page 47 DX-600/800 2.2.20. SNS2 PC Board (1010) (1) Place the machine on its rear side. (2) Remove 1 Screw (19). (3) Remove the Plate A (507). (4) Remove 1 Screw (19). (5) Disconnect Connector CN82 (538) on the SNS2 PC Board (1010).
Page 48 DX-600/800 2.2.21. Printer Grease Points Before reassembling, apply EM-50L Grease as described below. (1) B83D22 Gear G (622) : Gear surface (2) D60D20 Gear B (621) : Rib surface (3) D55 Gear F (619) : Gear surface (4) D55 Gear F (619) : Gear Side surface Edition 1.0...
Page 49: Screw Identification Template
DX-600/800 2.3. Screw Identification Template Ref No. Part No. Figure Remark XTB3+8J Screw XYN3+F8 Screw XYN4+F8 Screw XYN3+F10 Screw XTB3+10J Screw XSN3+W8FC Screw XTB26+6J Screw DZPA000001 Screw DZPB000007 Silver Screw XTB3+8JK Screw XSB4+10BN Screw DZJM000171 Snap Ring DZPB000020 Screw XTW3+8SFC Screw Edition 1.0...
Page 50: Maintenance, Adjustments And Check Points
DX-600/800 3 Maintenance, Adjustments and Check Points 3.1. Required Tools Tool Tool Soft Cloth Tweezer Isopropyl Alcohol Pliers Phillips Screwdriver (#2) Cotton Swab Stubby Phillips Screwdriver (#2) Brush Blade-tip Screwdriver (3/32 in) 10 Molykote EM-50L Grease (Available from Dow Corning, URL: http://www.dowcorning.com)
Page 51: Periodic Maintenance Check List
DX-600/800 3.3. Periodic Maintenance Check List The chart outlined below is a general guideline for maintenance. The example list is for an average usage of 50 transmitted and received documents per day. Needless to say, the environmental conditions and actual use will vary these factors. The chart below is for reference only.
Page 52: Updating The Firmware
B.Copy the Firmware from an Existing Machine 1. Unplug the Power Cord to turn the machine OFF. 2. Install a Flash Memory Card (2 MB x 2, 4 MB or higher) into the machine with the Panasonic Logo facing outwards.
Page 53 Erasing the Master Firmware Card 1. Unplug the Power Cord to turn the machine OFF. 2. Install the Master Firmware Card into the machine with the Panasonic Logo facing outwards. 3. Plug in the Power Cord to turn the machine ON.
Page 54 (3) Remove the Memory Card Cover. Memory Card Cover (4) Insert the Flash Memory Card gently into the card slot with the Panasonic logo facing to the outside of the machine. Memory Card Caution: Installing the Flash Memory Card in the wrong direction may damage the connecting pins inside the machine.
Page 55 DX-600/800 (5) Open the Control Panel Unit. (6) Activate the Read Point Sensor with your finger Control Panel Unit and plug in the Power Cord. (7) Wait approximately 10 seconds, release the Read Point Sensor, close the Control Panel Unit (ADF) and the Printer Cover.
Page 56: Glossary Of Electrical Abbreviations
DX-600/800 3.5. Glossary of Electrical Abbreviations Glossary of Electrical Abbreviations Signal Name Description +24V +24 VDC Power Supply +24VD +24 VDC Power Supply +24VM +24 VDC Power Supply (Motors) +3.3V +3.3 VDC Power Supply +5 VDC Power Supply +5VP +5 VDC Pilot Power Supply (Sleep Mode)
Page 57 DX-600/800 Glossary of Electrical Abbreviations Signal Name Description Data Signal Data Signal Data Signal Data Signal Data Signal Data Signal Data Signal Data Signal Data Signal Data Signal Data Signal Data Signal Data Signal Data Signal Development Voltage (AC 1.65 kHz Square Wave) Development &...
Page 58 DX-600/800 Glossary of Electrical Abbreviations Signal Name Description MTpA Stepping Signal MTpB Stepping Signal nADF1 Paper Feed Roller Solenoid Control Signal nADF2 Paper Feed Roller Solenoid Control Signal nBPNT Read Point Detection Signal nCCHK1 No Cassette Detection Signal nCCHK2 No Cassette Detection Signal (2nd Cassette)
Page 59 DX-600/800 Glossary of Electrical Abbreviations Signal Name Description pCMLD Line Switching Relay Drive Signal pCTON Ring Detection Signal pHKOF External Phone Off-Hook Detection Signal pSPKOT Line Signal, Key Tone, Ringer Data Read/Write Select Signal RCV (-) Handset Receiver RCV (+)
Page 60: Sc Pc Board
DX-600/800 3.6. SC PC Board SC PCB Signal Name Destination Signal Waveform Function Pin No. CN1-1 +24V LED Array +24 VDC Power Supply +24V CN1-2 nLEDON LED Array LED Enable Signal Approx.+13V(H) LED Off LED On 0V(L) SC PCB Signal Name...
Page 61 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN6-1 +24V POWER SUPPLY +24 VDC Power Supply +24V UNIT CN103-1 CN6-2 +24V POWER SUPPLY +24 VDC Power Supply +24V UNIT CN103-2 CN6-3 POWER SUPPLY Ground UNIT CN103-3 CN6-4...
Page 62 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN7-1 CCD PCB Reset Signal +5V(H) CN30-1 0V(L) CN7-2 FCK1 CCD PCB Shift Register Clock 1 s1 s CN30-2 +5V(H) 0V(H) CN7-3 FCK2 CCD PCB Shift Register Clock 1 s 1 s...
Page 63 DX-600/800 CN12 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN12-1 Flash Memory Ground Card CN12-2 Flash Memory Data Signal +5V(H) Card 0V(L) CN12-3 Flash Memory Data Signal +5V(H) Card 0V(L) CN12-4 Flash Memory Data Signal +5V(H) Card...
Page 64 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN12-12 Flash Memory Address Signal +5V(H) Card 0V(L) CN12-13 Flash Memory Address Signal +5V(H) Card 0V(L) CN12-14 Flash Memory Address Signal +5V(H) Card 0V(L) CN12-15 nWEL Flash Memory Write L Signal - Low Enable...
Page 65 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN12-23 Flash Memory Address Signal +5V(H) Card 0V(L) CN12-24 Flash Memory Address Signal +5V(H) Card 0V(L) CN12-25 Flash Memory Address Signal +5V(H) Card 0V(L) CN12-26 Flash Memory Address Signal...
Page 66 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN12-34 Flash Memory Ground Card CN12-35 Flash Memory Ground Card CN12-36 Flash Memory Flash Memory Card 5V(H) Card Detection Signal H: Card Not Installed 0V(L) L: Card Installed CN12-37...
Page 67 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN12-45 Flash Memory Not Used Card CN12-46 Flash Memory Address Signal +5V(H) Card 0V(L) CN12-47 Flash Memory Address Signal +5V(H) Card 0V(L) CN12-48 Flash Memory Address Signal +5V(H) Card...
Page 68 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN12-59 nMB4 Flash Memory Flash Memory Size +5V(H) Card H: 8MB L: Others 0V(L) CN12-60 Flash Memory Not Used Card CN12-61 N.C. Flash Memory Not Used Card CN12-62 Flash Memory...
Page 69 DX-600/800 CN14 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN14-1 PNL PCB Ground CN50-1 CN14-2 PNL PCB +5 VDC Power Supply CN50-2 CN14-3 +5VP PNL PCB +5 VDC Pilot Power Supply, CN50-3 that provides power to the active components during the Sleep Mode.
Page 70 DX-600/800 CN18 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN18-1 L2 (T) MJR PCB Line Transformer Input CN28-1 Signal CN18-3 L1 (R) MJR PCB Ground CN28-3 CN18-6 +24V MJR PCB +24 VDC Power Supply +24V CN29-1 CN18-7...
Page 71 DX-600/800 CN53 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN53-1 +24VM POWER SUPPLY +24 VDC Power Supply +24V UNIT CN103-12 CN53-2 nDRCK POWER SUPPLY Development +AC Clock +24V UNIT CN103-13 CN53-3 nCRCK POWER SUPPLY Charge Control DC Output...
Page 72 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN54-6 MMnB Main Motor Motor Drive Signal +24V CN118-6 CN56 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN56-1 +24VM Paper Feed +24 VDC Power Supply +24V...
Page 73 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN58-4 N.C. Not Used CN58-5 SNS4 PCB +5 VDC Power Supply CN87-5 CN58-6 nESEN SNS4 PCB Paper Exit Sensor Detection +5V(H) CN87-6 Signal L: Detect 0V(L) CN59 SC PCB...
Page 74 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN66-3 CST2 PCB +5 VDC Power Supply CN70-3 CN66-4 nPCHK2 CST2 PCB No Paper Detection Signal +5V(H) CN70-4 (2nd Cassette) H: No Paper 0V(L) L: Paper CN66-5 pADF2 CST2 PCB...
Page 75 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN68-7 Ground CN1-7 CN69 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN69-1 nPMCK Tetragon Motor Clock +5V(H) CN15-1 0.702 kHz (400 dpi) 1.076 kHz (600 dpi)
Page 76 DX-600/800 CN93 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN93-1 LEDV LANB PCB CN95-1 +5V Power Supply for LED CN93-2 LEDV LANB PCB CN95-2 +5V Power Supply for LED Ground CN93-3 LANB PCB CN95-3 CN93-4 LANB PCB CN95-4...
Page 77 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. 1CN93-17 LANB PCB CN95-17 Not Used CN93-18 LANB PCB CN95-18 Not Used CN93-19 LANB PCB CN95-19 Not Used CN93-20 LANB PCB CN95-20 Not Used CN93-21 LANB PCB CN95-21 Not Used...
Page 78 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. +3.3V(H) CN93-33 LANB PCB CN95-33 Data Signal 0V(L) +3.3V(H) CN93-34 LANB PCB CN95-34 Data Signal 0V(L) +3.3V(H) CN93-35 LANB PCB CN95-35 Data Signal 0V(L) +3.3V(H) CN93-36 LANB PCB CN95-36...
Page 79 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. +3.3V(H) CN93-49 INTR0 LANB PCB CN95-49 High Enable 0V(L) CN93-50 LANB PCB CN95-50 Ground CN93-51 *LAN LANB PCB CN95-51 +3.3V(H) LANB PCB Connected Detection Signal 0V (L) H: LANB PCB not connect...
Page 80 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN93-65 LANB PCB CN95-65 Not Used CN93-66 LANB PCB CN95-66 Not Used CN93-67 LANB PCB CN95-67 Not Used CN93-68 LANB PCB CN95-68 Not Used CN93-69 LANB PCB CN95-69 Not Used...
Page 81 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN93-81 AD12 LANB PCB CN95-81 Address Signal +3.3V(H) 0V(L) CN93-82 AD11 LANB PCB CN95-82 Address Signal +3.3V(H) 0V(L) CN93-83 AD10 LANB PCB CN95-83 Address Signal +3.3V(H) 0V(L) CN93-84 LANB PCB CN95-84 Address Signal +3.3V(H)
Page 82 DX-600/800 SC PCB Signal Name Destination Signal Waveform Function Pin No. CN93-97 LANB PCB CN95-97 Ground CN93-98 LANB PCB CN95-98 Ground CN93-99 LANB PCB CN95-99 Ground CN93-100 LANB PCB Ground CN95-100 Edition 1.0 APR 2002...
Page 83: Mjr Pc Board
DX-600/800 3.7. MJR PC Board CN20 MJR PCB Signal Name Destination Signal Waveform Function Pin No. CN20-3 LT2(T) Telephone Line Line Signal CN20-4 LT1(R) Telephone Line Line Signal CN23 MJR PCB Signal Name Destination Signal Waveform Function Pin No. CN23-1 N.C.
Page 84: Power Supply Unit
DX-600/800 3.8. Power Supply Unit CN101 PS Unit Signal Name Destination Signal Waveform Function Pin No. CN101-1 Black (L) ACI PC Board AC Power Supply AC100V CN101-2 N.C. Not Used CN101-3 White (N) ACI PC Board AC Power Supply AC100V...
Page 85 DX-600/800 CN201 PS Unit Signal Name Destination Signal Waveform Function Pin No. CN201-1 Development Development Development Voltage Roller (AC 1.65 kHz Square Wave) & DC Voltage -300V 1650Vp-p CN201-2 N.C. Not Used CN201-3 N.C. Not Used CN201-4 N.C. Not Used Charge Current: 200 µA...
Page 86: Pnl Pc Board
DX-600/800 3.9. PNL PC Board CN50 Refer to SC PC Board CN14. PNL PCB Signal Name Destination Signal Waveform Function Pin No. LCD-1 LCD Module-1 Register Select Signal H: Data Register L: Instruction Register LCD-2 LCD Module-2 Data Read/Write Select...
Page 87 DX-600/800 PNL PCB Signal Name Destination Signal Waveform Function Pin No. LCD-11 LCD Module-11 Data Signal LCD-12 LCD Module-12 Ground LCD-13 LCD Module-13 +5 VDC Power Supply LCD-14 LCD Module-14 +5 VDC Power Supply LCD-15 LCD Module-15 Power Supply for LCD +4.8V(Max)
Page 88: Sns3 Pc Board
DX-600/800 3.10. SNS3 PC Board CN83 Refer to SC PC Board CN59. CN84 SNS3 PCB Signal Name Destination Signal Waveform Function Pin No. CN84-1 Toner Sensor Ground CN84-2 TONER Toner Sensor Remaining Toner Level Signal Approx. +2 VDC CN84-3 Toner Sensor +5 VDC Power Supply Edition 1.0...
Page 89: Sns4 Pc Board
DX-600/800 3.11. SNS4 PC Board CN85 SNS3 PCB Signal Name Destination Signal Waveform Function Pin No. SNS1 PCB CN85-1 nCCHK1 No Cassette Detection +5V(H) CN81-1 Signal L: No Cassette 0V(L) SNS1 PCB CN85-2 Ground CN81-2 SNS1 PCB CN85-3 nRSEN Timing Sensor Detection...
Page 90: Sns1 Pc Board
DX-600/800 3.12. SNS1 PC Board CN80 SNS1 PCB Signal Name Destination Signal Waveform Function Pin No. SNS2 PCB CN80-1 nCCHK1 No Cassette Detection +5V(H) CN82-1 Signal L: No Cassette 0V(L) SNS2 PCB CN80-2 Ground CN82-2 SNS2 PCB CN80-3 LDSC1 No Cassette Sensor LED...
Page 91: Lanb Pc Board
DX-600/800 3.17. LANB PC Board CN96 Refer to SC PC Board CN93. CN97 LANB PCB Signal Name Destination Signal Waveform Function Pin No. CN97-1 ACTIVITY LANC PCB LANB PCB / LANC PCB CN202-1 Activity Signal CN97-2 LANC PCB +5 VDC Power Supply...
Page 92: Cst2 Pc Board (Optional)
DX-600/800 3.19. CST2 PC Board (Optional) CN70 Refer to SC PC Board CN66. CN71 CST2 PCB Signal Name Destination Signal Waveform Function Pin No. CN71-1 +24VM Paper Feed +24 VDC Power Supply +24V Solenoid CN70-2 nADF2 Paper Feed Paper Feed Roller Solenoid...
Page 93: Sru Pc Board (Optional)
DX-600/800 3.21. SRU PC Board (Optional) CN90 Refer to MJR PC Board CN23. CN91 SRU PCB Signal Name Destination Signal Waveform Function Pin No. CN91-1 N.C. Not Used CN91-2 MIC (+) Telephone Handset Microphone Handset CN CN91-3 RCV (+) Telephone...
Page 94: Troubleshooting
DX-600/800 4 Troubleshooting 4.1. Initial Troubleshooting Flowchart START Plug-in the Power Cord to turn the machine ON. Does the unit power up normally? Does the LCD display and function correctly? Troubleshoot Improper LCD Display (Sect. 4.2). Troubleshoot any 3-digit INFO. CODE displayed (Sect.
Page 95: Improper Lcd Display
DX-600/800 4.2. Improper LCD Display START Check connectors: CN14 (SC PCB) and CN50 (PNL1 PCB). When pressing any key, do you hear the 'Pi-' sound from the Speaker? Does CN14, pin 2 and pin 3 on the SC PCB measure +5VDC? Replace the PNL1 PCB.
Page 96: Information Codes (Info. Codes)
DX-600/800 4.3. Information Codes (INFO. CODES) The 3-digit information codes display to show the unit’s status. These codes also print on the journal. The following table indicates appropriate sections for troubleshooting. Code Explanation Phase Section 001, 002, 007 Recording paper jam C, D 4.3.8.
Page 97 DX-600/800 4.3.1. Information Codes: 400, 420 START START Enable the monitor Is reception from a speaker. (Refer to Sect. reference unit 5.1 Parameter No. 008) successful? Check the line connection from the wall jack to the "Line" on the MJR PCB.
Page 98 DX-600/800 4.3.2. Information Codes: 401, 402, 422 402, 422 START Is Communication with the reference unit successful? Replace the SC PCB. Check the remote unit in question. (Remote unit is defective) START Is the ID Number programmed into your machine? Program the ID Number.
Page 99 DX-600/800 4.3.3. Information Codes: 404, 405, 407 START Is communication with reference unit successful? 1. Replace the MJR PCB. 2. Replace the SC PCB. Change Function Parameter #010: Reduce Tx Attenuation Level Does the problem still occur? Does the problem still occur? Check the telephone line condition.
Page 100 DX-600/800 4.3.4. Information Code: 416 START Is communication with the reference unit successful? 1. Replace the MJR PCB. 2. Replace the SC PCB. Change Function Parameter #011: Reduce Rx Sensitivity Level Does the problem still occur? Does the problem still occur? Check the telephone line condition.
Page 101 DX-600/800 4.3.5. Information Codes: 408, 409, 417, 418, 490 START Is communication with the reference unit successful? 1. Replace the MJR PCB. 2. Replace the SC PCB. Transmitting Is the unit transmitting or receiving? Does the problem still occur? Receiving...
Page 102 DX-600/800 4.3.6. Information Code: 434 START Is communication with the reference unit successful? Replace the SC PCB. Does the trouble occur regardless of the remote unit? Check the remote unit in Can the transmitter in question. question transmit to the...
Page 103 DX-600/800 4.3.7. Information Codes: 459, 494, 495 START Check the line connection between the telephone jack on the wall and the MJR PCB. Is communication with the reference unit successful? 1. Replace the MJR PCB. 2. Replace the SC PCB.
Page 104 DX-600/800 4.3.8. Information Codes: 001, 002, 007 (Recording Paper Jam) START Is the recording paper size and thickness within specification? Replace with correct paper. Is the recording paper loaded in the Cassette properly? Load the paper correctly. Is the paper cassette functional? Replace the paper cassette.
Page 105 DX-600/800 4.3.9. Information Code: 010 (No Recording Paper) START Is the Paper Cassette seated properly Reseat the cassette. Is the recording paper loaded in the cassette? Load the paper. Is the No Paper Actuator operational? Replace the Actuator. Is the No Paper Sensor operational? Replace the No Paper Sensor.
Page 106 DX-600/800 4.3.10. Information Codes: 030, 031 (Document Jam) START Is the document path blocked? Remove the blockage. Does the Tx Motor rotate? 1. Replace the Tx Motor. 2. Replace the SC PCB. Does the document feed into the unit? Check all gears and rollers.
Page 107 DX-600/800 4.3.12. Information Codes: 403, 411, 414, 415 (Polling Operator Trouble) 403, 411, 414 START START Inform the remote side Review the polling operation (receiving side) that their referring to the Operating machine does not have Instructions. polling transmission capability.
Page 108: Printed Copy Quality Problems
DX-600/800 4.4. Printed Copy Quality Problems 4.4.1. Black Copy START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the Toner Cartridge operational? Replace the Toner Cartridge. Is the Power Supply Unit normal? 1. Check all connectors and voltages on the Power Supply Unit.
Page 109 DX-600/800 4.4.2. Blank Copy START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the Toner Cartridge operational? Replace the Toner Cartridge . Are there any foreign particles or stains on the BTR? 1. Clean the BTR with a soft, dry cloth.
Page 110 DX-600/800 4.4.3. Vertical White Lines START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the recording paper damp? Replace the recording paper. Is the Toner Cartridge operational? Replace the Toner Cartridge . Are there any foreign particles...
Page 111 DX-600/800 4.4.4. Ghost Images A A A START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the recording paper damp? Replace the recording paper. Is the Toner Cartridge operational? Replace the Toner Cartridge. Are there any foreign particles or stains on the BTR? 1.
Page 112 DX-600/800 4.4.5. Vertical Dark Lines START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the Toner Cartridge operational? Replace the Toner Cartridge. Are there any foreign particles or stains on the BTR? 1. Clean the BTR with a soft, dry cloth.
Page 113 DX-600/800 4.4.6. Horizontal Dark Lines START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the Toner Cartridge operational? Replace the Toner Cartridge. Are there any foreign particles or stains on the BTR? 1. Clean the BTR with a soft, dry cloth.
Page 114 DX-600/800 4.4.7. Dark Background START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the recording paper damp? Replace the recording paper. Is the Toner Cartridge operational? Replace the Toner Cartridge. Is the Laser Unit (LSU) normal? Replace the Laser Unit (LSU).
Page 115 DX-600/800 4.4.8. Light Print START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the recording paper damp? Replace the paper. Is the Toner Cartridge operational? Replace the Toner Cartridge. Are there any foreign particles or...
Page 116 DX-600/800 4.4.9. Horizontal White Lines START Is the printout in Service Mode 3 normal? Check the Scanner mechanism. Is the recording paper damp? Replace the recording paper. Is the Toner Cartridge operational? Replace the Toner Cartridge. Are there any foreign particles or stains on the BTR? 1.
Page 117 DX-600/800 4.4.10. Improper Fusing (Printed image does not bond to the paper) START Is the recording paper damp? Replace the recording paper. Is the Fuser Unit normal? Replace the Fuser Unit. (See Note) Note: Replace the entire Fuser Unit when the Thermostat, the Thermal Fuse or the Thermistor Assembly becomes an open-circuit.
Page 118 DX-600/800 4.4.11. Voids in Solid Areas START Is the recording paper damp? Replace the recording paper. Is the Toner Cartridge operational? Replace the Toner Cartridge. Are the Fuser and Pressure Roller surfaces clean? Clean or replace the rollers. Edition 1.0...
Page 119 DX-600/800 4.4.12. Black Dots START Is the Toner Cartridge operational? Replace the Toner Cartridge. Are the Fuser and Pressure Roller surfaces clean? Clean or replace the rollers. Edition 1.0 APR 2002...
Page 120 DX-600/800 4.4.13. Recording Paper Creases START Is the recording paper damp? Replace the recording paper. Are there any foreign particles or stains in the paper path? Remove any obstructions and clean the paper path. Is the recording paper skewing? Ensure the paper is set under the Paper Separation Clips in the Cassette.
Page 121 DX-600/800 4.4.14. Poor Printed Copy Quality START Is the Test Pattern printout in Service Mode 3 normal? 1. Replace the SC PCB. 2. Replace the Laser Unit (LSU). 3. Replace the Power Supply Unit. 4. Replace the Toner Cartridge .
Page 122 Is the recording paper size and thickness within specification? Replace with correct paper. Is a Panasonic Toner Cartridge being used? Replace with a Panasonic Toner Cartridge. Are all switches and sensors operating properly? Adjust, clean or replace. Are there any foreign particles...
Page 123: Scanned Copy Quality Problems
DX-600/800 4.4.16. Scanned Copy Quality Problems START Is the LED Array abnormal? Replace the LED Array. Are there any foreign particles or paper pieces in the scanning area? Remove the foreign particles or paper pieces from the scanning area. Is the scanning area dirty? 1.
Page 124: Document Feeder (Adf)
DX-600/800 4.5. Document Feeder (ADF) 4.5.1. No Document Feed START Is the document set properly? Set the document properly. Is the document thickness or size within specification? Make a copy or cut the document to the specification size. Is the "Pi.." tone generated when...
Page 125: Document Does Not Feed Or Multiple Feeds
DX-600/800 4.5.2. Document Does Not Feed or Multiple Feeds START Is the Control Panel Unit locked? Close the Control Panel Unit firmly. Is the adjustment of the Separation Rubber normal? Is the Separation Rubber worn out? Clean or adjust the Separation Rubber Pressure (Sect.
Page 126 DX-600/800 4.5.3. Document Jam (030) or Skew START Is the Control Panel Unit closed? Close the Control Panel Unit firmly. Do all sensors on the PNL1 PCB operate normally? Clean or replace PNL1 PCB. Does the Feed Roller have drive and sufficient friction?
Page 127: Communications
DX-600/800 4.6. Communications This section explains general troubleshooting procedures for the 400 series of Information Codes. These errors are primarily caused by poor telephone line quality (loss, noise, echo, etc.). This unit is furnished with Service Mode 1 to assist in troubleshooting line quality problems.
Page 128: Poor Transmitted Copy Quality
DX-600/800 4.6.2. Poor Transmitted Copy Quality START Make a copy. Is the printed copy normal? Is the LED Array lit? Does CN1, pin 1 on the SC PCB measure +24 VDC? Replace the LVPS. Does nLEDON go Low when the scan starts? Replace the SC PCB.
Page 129 DX-600/800 4.6.3. Dialing Problems START Does the unit proceed to Phase B? 1. Set documents on the ADF correctly. 2. Check the telephone line connection. 3. The called party is busy. 4. Refer to Sect. 4.6. Are you using One-Touch or ABBR dialing? Check the registered telephone number.
Page 130 DX-600/800 4.6.4. Transmission Problems START Does the ID display? 1. No ID function at the remote unit. 2. The ID is not set for the remote unit. Does the Verification Stamp operate? 1. Set "STAMP=ON" 2. Check CN3 (SC PCB).
Page 131 DX-600/800 4.6.5. Reception Problems START Does the machine answer the Ringing signal? 1. Set "RCV = AUTO" 2. Check that all covers are closed firmly. 3. Check the telephone line connection. 4. Check the Ringer Timing or DRD setting. 5. Check the recording paper path.
Page 132: Polling Problems
DX-600/800 4.6.6. Polling Problems START Is Polling reception OK? 1. Set the same polling password as the other party is using. 2. Check the password of the remote unit. Is Polling transmission OK? 1. Set the polling password or no - check mode.* 2.
Page 133: Troubleshooting The Lan Interface
DX-600/800 4.7. Troubleshooting the LAN Interface 4.7.1. Checking Network Configuration START Print the current Internet Parameters List Ask the customer for the Pre-Installation Information form filled out by the Network Administrator. Verify this information with the Internet Parameters List that you just printed.
Page 134 DX-600/800 4.7.2. Testing the TCP/IP Network It is beyond the scope of this Service Manual to cover Networking in detail, there are many excellent manuals on this subject, but we hope the information in this section will aid with your troubleshooting efforts.
Page 135 DX-600/800 2. Checking the Current Configuration Print the current unit Internet Parameters configuration. Locate a PC connected to the same Subnet Mask as the unit, then from the DOS Prompt, type the following command-line utility: "ipconfig /all" for Windows 98/Me/XP/2000/NT.
Page 136 DX-600/800 PINGing the Unit C:\WINDOWS>ping ef1.labo.mgcs.com Pinging ef1.labo.mgcs.com [192.168.3.5] with 32 bytes of data: Reply from 192.168.3.5: bytes=32 time=5ms TTL=253 Reply from 192.168.3.5: bytes=32 time=4ms TTL=253 Reply from 192.168.3.5: bytes=32 time=4ms TTL=253 Reply from 192.168.3.5: bytes=32 time=4ms TTL=253 PINGing the Default Gateway (Default Router IP Address) C:\WINDOWS>ping 192.168.3.254...
Page 137 DX-600/800 If the physical destination is far and it’s connected by WAN (Wide Area Network), the PING option command default value must be changed to compensate for the expected delayed response. e.g. -n 10 : The number of echo requests that the command should send.
Page 138 DX-600/800 5. Managing Network Route Tables In the simplest case a router connects two network segments. In this model, the system used to join the two segments needs to know only about these segments. The routing table for router R1 in this case is simple; the following table shows its key routes:...
Page 139 DX-600/800 When the packet does not reach the specified destination even when the physical connection is properly made, check the registered persistent routes on the same subnet as the Unit by typing "route print" in the DOS command-line. The output display is shown below: C:\WINDOWS>route print...
Page 140 250 Sender OK rcpt to:fax@labo.mgcs.com 250 Receipient OK data 354 Email, end with "CRLF . CR LF" [Press the Enter Key] Panasonic Internet Fax test test [Press the Enter Key] [Press the Enter Key] [Press the Enter Key] 250 OK, Mail accept...
Page 141: Information Codes Table (For Facsimile)
DX-600/800 4.8. Information Codes Table (For Facsimile) Fax Information Codes Code Mode Phase Description of Problem Cause C, D Leading edge of the recording Recording paper jam. COPY paper fails to reach the Timing Timing Sensor abnormal. Sensor. (1st Cassette)
Page 142 DX-600/800 Fax Information Codes Code Mode Phase Description of Problem Cause DCN was returned from receiver Your machine’s ID Number is not while transmitter is waiting for CFR programmed. or FTT. Possible incompatibility or incorrect Password. DCN was returned from receiver...
Page 143 DX-600/800 Fax Information Codes Code Mode Phase Description of Problem Cause No response received after Password does not match between (Polling) transmitting 3rd NSC. transmitter and receiver. Transmitter is defective. (No original, document jam, etc.) Remote side attempted to receive...
Page 144 DX-600/800 Fax Information Codes Code Mode Phase Description of Problem Cause XMT/ B, C, D During reception, CD turned OFF Line is disconnected. RCV(V.34) or continued ON for long time. Transmitter is defective. During communication, lost loop - SC PCB or MJR PCB are defective.
Page 145 DX-600/800 Fax Information Codes Code Mode Phase Description of Problem Cause Incorrect LDAP settings. LDAP Server Name, LDAP Login Name, LDAP Password and/or LDAP Search Base are incorrect. Unknown email address replied Mail Server received an incorrect email from the Mail Server.
Page 146 DX-600/800 Fax Information Codes Code Mode Phase Description of Problem Cause Dialer full while Relayed Dial buffer for manual number dialing Transmission Request was (70 stations) are being used. received. Relay The machine was requested to Comm. relay a document but has no Relay Hub capability.
Page 147: Diagnostic Codes (For Facsimile)
DATE TIME DIAGNOSTIC 00:00'42 123 456 789 01:55 C8649003C0000 1st digit 13th digit - PANASONIC PANAFAX DX-800 ********************************** - PANAFAX DX-800 - ****** -12345678901234567890- ******* 1st Digit: Manufacturer Code -: Not used/defined Fax Diagnostic Codes Definition Data Manufacturer Code Casio...
Page 148 DX-600/800 2nd Digit -: Not used/defined Fax Diagnostic Codes Definition Data ID (TSI, CSI, CIG) STOP Button Received Received Received Received Received Received Received Received Received Received Received Received Pressed Received Pressed Received Pressed Received Received Pressed Received Pressed Received...
Page 149 DX-600/800 4th Digit -: Not used/defined Fax Diagnostic Codes Definition Data Scanning Rate Resolution 20 ms/line 5 ms/line 10 ms/line 40 ms/line 0 ms/line 20 ms/line Fine 5 ms/line Fine 10 ms/line Fine Fine 40 ms/line Fine Fine Fine 0 ms/line...
Page 150 DX-600/800 6th Digit -: Not used/defined Fax Diagnostic Codes Definition Data Password Polling XMT/RCV Selective Comm. Comm. 7th Digit -: Not used/defined Fax Diagnostic Codes Definition Data Sub-Address Confidential Turnaround Relayed Comm. Comm. Comm. Polling Edition 1.0 APR 2002...
Page 151 DX-600/800 8th Digit -: Not used/defined Fax Diagnostic Codes Definition Data Advanced Cover Sheet Comm. Report XMT Check & Call Memory Transfer Report XMT Check & Call Memory Transfer 9th Digit -: Not used/defined Fax Diagnostic Codes Definition Data Standard/ Non-...
Page 152 DX-600/800 10th Digit -: Not used/defined Fax Diagnostic Codes Definition Data Coding 11th Digit -: Not used/defined Fax Diagnostic Codes Definition Data Symbol Rate V.34 (V.34) 2400 sr 2800 sr 3000 sr 3200 sr 3429 sr Edition 1.0 APR 2002...
Page 153 DX-600/800 12th Digit -: Not used/defined Fax Diagnostic Codes Definition Data Modem Speed Modem Speed (V.34) 2400 bps 4800 bps 2400 bps 7200 bps 4800 bps 9600 bps 7200 bps TC 7200 bps 9600 bps TC 9600 bps 12000 bps...
Page 154: Service Modes
DX-600/800 5 Service Modes 5.1. Service Modes (For Facsimile) 5.1.1. Service Mode Table The following service modes are provided to assist you in setting operational functions of the unit and determining the condition of the unit. Service Mode Description Function Parameter Setting Allows changes to the function parameters (the home position, etc.).
Page 155 DX-600/800 5.1.2. Service Mode 1 (Function Parameter Setting) Use the following procedure to change the function parameters. Service Mode 1 Step Operation or Unit Condition LCD Display Standby MMM-dd-yyyy 15:00 Press “FUNCTION” and then “7”. SET MODE (1-8) ENTER NO. OR Press “MONITOR”...
Page 156 DX-600/800 Service Mode 1 : Function Parameter Table Parameter Selections Function 000 MON/TEL DIAL 1 = Monitor Selects whether the machine starts to TX 2 = TEL/DIAL automatically during On-Hook dialing. Monitor : Start to TX after pressing START TEL/DIAL : Start to TX automatically 001 ALARM STATUS 1 = OFF Selects the No Paper or No Toner alarm status.
Page 157 DX-600/800 Service Mode 1 : Function Parameter Table Parameter Selections Function Not Used 017 TX START 1 = 2400 bps Selects the transmission modem start speed, 14400/ 2 = 4800 bps 12000/TC9600/TC7200/9600/7200/4800/2400 bps. 3 = 7200 bps Note: This parameter is applicable only when 4 = 9600 bps communicating with regular G3 machines.
Page 158 DX-600/800 Service Mode 1 : Function Parameter Table Parameter Selections Function 030 CED & 300 bps 1 = 75 ms Selects the pause interval between the CED and the 2 = 1 sec 300 bps signal. (Used when Echo Suppression is disabled.)
Page 159 DX-600/800 Service Mode 1 : Function Parameter Table Parameter Selections Function 050 RING DETECT 1 = Normal Selects the quality of ringer detection. Use if the line MODE 2 = Rough signal is out of regulation, set to "Rough" so that the unit may detect the ringing signals.
Page 160 DX-600/800 Service Mode 1 : Function Parameter Table Parameter Selections Function 070 LINE ERROR 1 = 128 lines 1. Selects the line disconnect condition during 2 = 256 lines reception. If the number of line errors exceed this 3 = 512 lines setting, the unit will disconnect the line.
Page 161 DX-600/800 Service Mode 1 : Function Parameter Table Parameter Selections Function 087 DARKER LEVEL 0 = Lightest Contrast Selects the contrast level. →15 0← 088 NORMAL Lightest← →Darkest 15 = Darkest Contrast LEVEL 089 LIGHTER LEVEL Not Used 092 SMOOTHING 1 = Off Selects whether the smoothing function is available.
Page 162 DX-600/800 Service Mode 1 : Function Parameter Table Parameter Selections Function Not Used 130 BUSY-ACK • In Busy Selects the signal timing between the BUSY and TIMING • After Busy ACK signal in Printer Interface Mode. • While Busy 131 CMD RCV GRD 1 min.
Page 163 DX-600/800 5.1.3. Service Mode 3 (Printout of Lists, Reports and Test Results) From this Service Mode you can print the Function Parameter List, Page Memory Test, Printer Report, All Document File, Protocol Trace and the Toner Order Form. 5.1.3.1. Function Parameter List A list of all Function Parameters can be printed by the following procedure.
Page 164 047 RESPONSE WAIT:[55sec] 55 sec 097 ---------- 048 --------- 098 ---------- 049 --------- 099 ---------- Note:The power must be reset for the new parameter settings to take effect. - PANASONIC - ******************************** - PANAFAX DX-800 - ******* - 12345678901234567890 -********* Edition 1.0 APR 2002...
Page 165 DX-600/800 Function Parameter List (Sample) ************* -FUNCTION PARAMETER- ************* DATE MMM-dd-yyyy ***** TIME 12:07 ***P.02 100 ---------- 150 ---------- 101 ---------- 151 ---------- 102 ---------- 152 ---------- 103 ---------- 153 ---------- 104 ---------- 154 ---------- 105 ---------- 155 ---------- 106 ----------...
Page 166 DX-600/800 5.1.3.2. Page Memory Test A test pattern prints out for checking the page memory and the printer mechanism using the following procedure. Service Mode 3 - Page Memory Test Step Operation or Unit Condition LCD Display Standby MMM-dd-yyyy 15:00 Press “FUNCTION”...
Page 167 DX-600/800 5.1.3.3. Printer Report All printer errors are logged on the Printer Report which can be printed by the following procedure. Service Mode 3 - Printer Report Step Operation or Unit Condition LCD Display Standby MMM-dd-yyyy 15:00 Press “FUNCTION” and then “7”.
Page 168 DX-600/800 **************-PRINTER REPORT-********************* DATE MMM-dd-yyyy ***** TIME 19:02******** LAST PRINT ERROR : MMM-dd 15:38 NO. 001-12 CUSTOMER ID : 1234567890123456 FAX ROM VERSION : DX-800 AAV1xxxxAU TRANSMIT COUNTER : 000475 RECEIVE COUNTER : 000398 COPY COUNTER : 001083 PRINT COUNTER...
Page 169 DX-600/800 1. Printer Error Code Table Printer Error Code Table Error Description of Problems Cause Code 00 No problem detected. 11 Timing Sensor did not turn ON within a 1. Recording Paper misfeeding, Paper Feed certain period of time. Roller defective.
Page 170 DX-600/800 Printer Error Code Table Error Description of Problems Cause Code 64 Unit detected “No Cassette”. 1. Cassette not installed or partially open. 2. Cassette Sensor defective. 65 Unit detected “Out of Paper”. 1. The Paper Cassette is empty. 2. Paper Detect Sensor defective.
Page 171 DX-600/800 2. Printer Error Detail Explanation Recording Paper Jam Detection Feed Solenoid (nADF1) (CN14, 2) Recording Paper A sec Size Setting Legal Letter Timing Sensor (nRSEN) 1.35s Timing Sensor did not turn ON E001 will be logged when nRSEN does not go low 0.55s...
Page 172 DX-600/800 Fuser Error Detection ( C) E26 will be logged. E24 will be logged if Thermistor detects 180 C for more than 3 sec. (Thermostat will open.) E23 will be logged if Thermistor detects 175 C or higher for 5 min.
Page 173 DX-600/800 Laser Unit (LSU) Error Detection nPRNT Print Start nPMON (CN69-3) Tetragon Motor ON nPMRY (CN69-2) Normal Condition Tetragon Motor Ready Motor ON 3 sec 20 sec nPMRY Tetragon Motor does not reach constant speed during wake up state. nPMRY does not go low for more than 2 sec during 3 sec to 20 sec after nPMON goes low.
Page 174 DX-600/800 Out of Toner Detection Toner Sensor Output Signal Status A (Enough toner in the cartridge) Max. - min. voltage is less than 1.0V Min. voltage is more than 1.4V Status B (Remaining toner is getting low) Max. - min. voltage is less than 0.25V Min.
Page 175 DX-600/800 5.1.3.4. All Document Files Print the document files from the Flash Memory. Service Mode 3 - All Document Files Step Operation or Unit Condition LCD Display Standby MMM-dd-yyyy 15:00 Press “FUNCTION” and then “7”. SET MODE (1-8) ENTER NO. OR Press “MONITOR”...
Page 176 DX-600/800 5.1.3.5. Protocol Trace Print a Protocol Trace Report for the previous communication. Service Mode 3 - Protocol Trace Step Operation or Unit Condition LCD Display Standby MMM-dd-yyyy 15:00 Press “FUNCTION” and then “7”. SET MODE (1-8) ENTER NO. OR Press “MONITOR”...
Page 177 DX-600/800 5.1.3.6. Toner Cartridge Order Form The Toner Cartridge Order Form can be printed out manually by the following procedure. Service Mode 3 - Toner Cartridge Order Form Step Operation or Unit Condition LCD Display Standby MMM-dd-yyyy 15:00 Press “FUNCTION” and then “7”.
Page 178 DX-600/800 For USA and Canada ************************************* > TONER CARTRIDGE ORDER FORM < ************************************* **** The toner supply in your facsimile machine is running low **** (1) To order a replacement Cartridge from your Authorized Dealer Panafax Corp. (2) 1 201 111 5555 (3)
Page 179 (3) Order Tel # Up to 36 digits (4) Order Fax # Up to 36 digits (5) Customer ID Up to 16 characters (User Identification Code) (6) Toner Cartridge # UG-3350 (For Other Destinations) for DX-600 Edition 1.0 APR 2002...
Page 180 DX-600/800 5.1.4. Service Mode 4 (Modem Test) 5.1.4.1. Binary Signal This Service Mode is used to check the binary signal output. Signals can be output to the line using the following procedure. Service Mode 4 - Binary Signal Step Operation or Unit Condition...
Page 181 DX-600/800 5.1.4.2. Tonal Signal This Service Mode is used to check the tonal signal output. Signals can be output to the line using the following procedure. Service Mode 4 - Tonal Signal Step Operation or Unit Condition LCD Display Standby...
Page 182 DX-600/800 5.1.4.3. DTMF Signal This Service Mode is used to check the DTMF (Dual Tone Multi Frequency) signal output. The DTMF signal can be generated using the following procedure. Service Mode 4 - DTMF Signal Step Operation or Unit Condition...
Page 183 DX-600/800 5.1.4.4. Binary Signal (V.34) This Service Mode is used to check the binary signal output. Signals can be output to the line using the following procedure. (V.34) Service Mode 4 - Binary Signal Step Operation or Unit Condition LCD Display...
Page 184 DX-600/800 5.1.5. Service Mode 5 (Diagnostic) 5.1.5.1. CCD Test This Service Mode is used to check the CCD. Use the following procedure to initiate the test. Service Mode 5 Step Operation or Unit Condition LCD Display Standby MMM-dd-yyyy 15:00 Press “FUNCTION” and then “7”.
Page 185 DX-600/800 5.1.5.2. LCD / LED Test This Service Mode is used to check the LCD and LEDs on the Control Panel. Use the following procedure to initiate the test. Service Mode 5 Step Operation or Unit Condition LCD Display Standby...
Page 186 DX-600/800 5.1.6. Service Mode 6 (RAM Initialization) Initializes the RAM and restores the Function Parameters to their default values. Note: This operation should be performed when the unit is first installed. Service Mode 6 Step Operation or Unit Condition LCD Display...
Page 187 DX-600/800 5.1.7. Service Mode 7 (LBP Service Mode) This Service Mode is used to change printer parameters and verify printer information. Use the following procedure to change printer parameter. Service Mode 7 Step Operation or Unit Condition LCD Display Standby...
Page 188 DX-600/800 5.1.8. Service Mode 8 (Check & Call) 5.1.8.1. Overview This feature enables the Authorized Servicing Dealers to manage and improve the Fax machine maintenance to their customers by alerting them of equipment problems. It also can be used as a Supply Sales Tool by alerting the Dealer that the unit is running Low on Toner.
Page 189 DX-600/800 Printer Error Code Table Info. Printer LED/LCD Condition Content of Error Code Error Code Only Report Printer Error 31,32,36 LSU Problem No response from LP 81, 82 Controller Rx Door Open Note: 1. Tx Report: S = Service Alert Report, M = Maintenance Alert Report 2.
Page 190: Setting Operation
DX-600/800 5.1.8.3. Setting Operation 8:CHECK & CALL PRESS SET TO SELECT SET or START SET or START CHECK & CALL (1-7) SERVICE ALERT FAX # CLEAR CLEAR 1:SVC. ALERT FAX # SET or START Enter a destination fax number for the Service Alert Report.
Page 191 DX-600/800 Note 1. Service Alert Report To enable the automatic transmission of Service Alert Report, enter the destination fax telephone number in the “SERVICE ALERT (FAX #)” field. When a printer error occurs, the Service Alert Report is transmitted to the designated number automatically. A blank entry in this field, disables the Automatic transmission of the Service Alert Report.
Page 192: Service Alert Report Format
DX-600/800 5.1.8.4. SERVICE ALERT REPORT FORMAT *************************************************** DATE MMM-dd-yyyy ***** TIME 12:14 ******** **************************** > SERVICE ALERT REPORT < **************************** (2) (3) LAST PRINT ERROR : MM-dd-yy 12:10 No.999-00 ABC COMPANY (4) CUSTOMER ID FAX ROM VERSION : DX-800 AAV1xxxxAU...
Page 193: Maintenance Alert Report Format
DX-600/800 5.1.8.5. MAINTENANCE ALERT REPORT FORMAT *************************************************** DATE MMM-dd-yyyy ***** TIME 12:14 ******** **************************** > MAINTENANCE ALERT REPORT < **************************** LAST PRINT ERROR : MACHINE IS RUNNING OUT OF TONER (1) CUSTOMER ID : ABC COMPANY (2) FAX ROM VERSION...
Page 194 DX-600/800 5.1.9. Service Mode 9 (System Maintenance) 5.1.9.1. Overview This Service Mode is used to maintain and/or update the firmware of the machine. Use the following procedure for System Maintenance. Service Mode 9 Step Operation or Unit Condition LCD Display...
Page 195 DX-600/800 System Maintenance Table Maintenance Mode Description Updates the firmware in the machine with the Master Firmware FIRMWARE UPDATE Card. Updates the firmware in the machine with the Master Firmware from the PC. After the firmware is updated, the machine reboots automatically and returns to standby. See Note.
Page 196 DX-600/800 5.1.9.2. Operation 9:SYSTEM MAINTENANCE PRESS SET TO SELECT START SET or START SET or START Display card version SET or START FIRMWARE UPDATE(1-3) FIRMWARE UPDATE DX-800AAV1xxxxAU SYSTEM MAINT.(1-8) 1:HOST PROGRAM <4MB> * IN PROGRESS * PRESS SET TO START...
Page 197 (3) Remove the Memory Card Cover. Memory Card Cover (4) Insert the Flash Memory Card gently into the card slot with the Panasonic logo facing to the outside of the machine. Memory Card Caution: Installing the Flash Memory Card in the wrong direction may damage the connecting pins inside the machine.
Page 198 DX-600/800 5.1.10.1. Send Received File This function is the relief mode which makes it possible to retrieve memory received documents during a fatal printer error by transferring the documents to another fax machine. MMM-dd-yyyy 15:00 FUNC MON X 4 SERVICE MODE ENTER NO.
Page 199: System Description
G The Separation Rubber (207) separates documents placed on the ADF, preventing multiple feeding. LED Array (329) The DX-600/800 has one LED Array, used as a light source to illuminate the document. The LED Array turns ON when the Read Point Sensor is activated by the document leading edge.
Page 200 DX-600/800 Transmit Mechanism Sensors The ADF Sensor (PC1), activated by Actuator A (224), detects the presence of documents on the ADF Tray and multiple pages. The RP (Read Point) Sensor (PC3), activated by Actuator B (225), detects the lead and trail edges of the document, controlling the reading position.
Page 201 DX-600/800 Drive System Eject Roller (303) Feed Roller (302) ADF Roller (331) Document B55D16 Gear (312) ADF Gear (305) D17 Gear (313) D25F Drive Gear (332) Transmit Motor (324) B55D30 Gear (311) D50 Gear (314) B54B22 Gear (310) 6.1.2 Control Panel The Control Panel consists of the PNL PC Board (1004) and LCD Unit, which displays the various status messages, and a membrane-type panel.
Page 202 DX-600/800 6.1.3. Printing Mechanism The Receive Mechanism consists of the Laser Unit (LSU), OPC (Organic Photo Conductor) Drum, and various other parts which ensure the normal feeding of recording paper. These components and their functions are as follows: Fuser Unit (701)
Page 203 DX-600/800 Paper Feed Unit No. 2 (Optional) Operation The Paper Feed Unit No.1 always takes priority. The Paper Feed Unit No. 2 becomes operational only when the cassette No.1 runs out of paper and the NP Sensor is deactivated, causing the nPCHK1 output signal level to go High.
Page 204 DX-600/800 6.1.4. Printing Process Operation Handle Toner Waste Box Waste Toner Bias Transfer Roller Cleaning Blade OPC Drum Laser Beam Development Roller Developing Blade Toner Agitator Sweeper Hopper Mixing Blade Charge In the dark, the Bias Charge Roller (BCR) applies a high, uniform negative charge to the surface of the OPC Drum.
Page 205 DX-600/800 TONER & INFO CODE 041” and the machine is disabled from printing any copies. The Toner Cartridge consists of OPC Drum, Bias Charge Roller, Development Roller, Developing Blade, Cleaning Blade, Mixing Blades and Toner Waste Box. The OPC Drum is an aluminum cylinder coated with an OPC (Organic Photo Conductor) sensitive material.
Page 206 DX-600/800 Laser A 5 mW Laser Diode, with a wave length of 780 nm (±20 nm), provides a modulated beam controlled by nVIDEO. The beam power on the drum surface is approximately 0.15 mW, and is controlled by the monitor circuit.
Page 207 DX-600/800 Fuser Lamp (732) Located in the Fuser Roller is a Halogen lamp that serves as the heat source for the Fuser Roller. Fuser Roller (709) A Teflon coated roller supplies the heat for bonding the toner to the paper. The temperature of the surface is kept constant at approximately 160 ±...
Page 208: Electrical Circuit Explanation
DX-600/800 6.2. Electrical Circuit Explanation 6.2.1. Fax Block Diagram Edition 1.0 APR 2002...
Page 209: Signal Routing
DX-600/800 6.2.2. Signal Routing 1. ADF Transmission Laser Printer MN86075 CCD PCB (IC30) LANB SHINE INTERNET DZAC000273 transFormer RJ45 (10Base-T/100Base-TX) (IC3) (T1) LANC S-DRAM 8MB (IC7) LINK LAN Controller (IC1) ACTIVITY Page Line Memory Memory D-BUS Buffer FROM 4MB MODEM...
Page 210: Memory Reception
DX-600/800 3. Direct Reception Laser Printer MN86075 CCD PCB (IC30) LANB SHINE INTERNET DZAC000273 transFormer RJ45 (10Base-T/100Base-TX) (IC3) (T1) LANC S-DRAM 8MB (IC7) LINK LAN Controller (IC1) ACTIVITY Page Line Memory Memory D-BUS Buffer FROM 4MB MODEM Program MN195006 (IC9)
Page 211 DX-600/800 5. Scan into Memory MN86075 CCD PCB (IC30) LANB SHINE INTERNET DZAC000273 transFormer RJ45 (10Base-T/100Base-TX) (IC3) (T1) LANC S-DRAM 8MB (IC7) LINK LAN Controller (IC1) ACTIVITY Page Line Memory Memory D-BUS Buffer FROM 4MB MODEM Program MN195006 (IC9) (I22)
Page 212: Multiple Copies
DX-600/800 7. Single Copy Laser Printer MN86075 CCD PCB (IC30) LANB SHINE DZAC000273 transFormer INTERNET RJ45 (IC3) (T1) (10Base-T/100Base-TX) LANC S-DRAM 8MB (IC7) LINK LAN Controller (IC1) ACTIVITY Page Line Memory Memory D-BUS Buffer FROM 4MB MODEM Program MN195006 (IC9)
Page 213 DX-600/800 9. Report/List Printing Laser Printer MN86075 CCD PCB (IC30) LANB SHINE INTERNET DZAC000273 transFormer RJ45 (10Base-T/100Base-TX) (IC3) (T1) LANC S-DRAM 8MB (IC7) LINK LAN Controller (IC1) ACTIVITY Page Line Memory Memory D-BUS Buffer FROM 4MB MODEM Program MN195006 (IC9)
Page 214 DX-600/800 11. LAN Transmission Laser Printer MN86075 CCD PCB (IC30) LANB SHINE DZAC000273 transFormer RJ45 (IC3) INTERNET (T1) (10Base-T/100Base-TX) LANC S-DRAM 8MB (IC7) LINK LAN Controller (IC1) ACTIVITY Page Line Memory Memory D-BUS Buffer FROM 4MB MODEM Program MN195006 (IC9)
Page 215 DX-600/800 6.2.3 Picture Signal Scanning Block The image data read by the optical unit is input to the CCD mounted on the CCD PC Board, then transferred to the SC PC Board after the optical information is converted into an electrical signal by the CCD.
Page 216 DX-600/800 ABC Circuit Output CCD Output IC30 IC28, 2 IC28, 1 R288 Control C175 Circuit R285 Shading Correction Circuit The Shading Correction Circuit, included in IC30, is provided to correct for reduction in LED lamp intensity around the optical lens and LED lamp intensity distortion due to shading of each bit. This circuit...
Page 217 DX-600/800 6.2.4 CCD Drive Clock Generator Circuit This circuit is also contained in IC30. Its function is to generate FSG, FCK1, FCK2 and RS clock signals, which are required for driving the CCD. These clock signals are generated by the system clock generator circuit derived from the 4 MHz clock signal that is input to IC30.
Page 218 DX-600/800 6.2.5 Line Monitor Circuit The Line Monitor Circuit consists of an operational DAA (The secondary side chip) and its peripheral circuits. Its function is to monitor the dial tone, DTMF tone, response signals, etc. over the speaker. It also sounds the output of the key touch tones, alarm tones, etc.
Page 219 DX-600/800 6.2.6 Transmit Motor Control Circuit The transmit motor is a PM type, two-phase bi-polar motor. The stepping signal and chopping current control signals (pTAPH, pTBPH, pTA10, pTA11, pTB10 and pTB11) are sent to the chopper drive circuit, comprised of IC36, IC37 and its peripheral circuitry, from IC3 SHINE output port. The motor is powered by +24 VDC and is driven by a 1/2-phase excitation, and greater step division is provided by controlling the phase circuit in steps (micro-step control).
Page 220 DX-600/800 6.2.7 Line Control Circuit The Line Control Circuit consists of CML relay, DP circuit, DAA (Direct Access Arrangement), Ring Detect Circuit for power-save and DC hold circuit. A Jack for an external telephone, which can be used for either an external telephone or an optional Handset Kit.
Page 221 DX-600/800 Dial Pulse Generator The Dial Pulse Generator consists of a CML relay, a DC hold circuit, a dial pulse generate circuit and their peripheral circuits. The generator generates dial pulses. The CPU on the SC PC Board controls all dial pulse generation sequences.
Page 222 DX-600/800 6.2.8 SNS PC Board Each sensor consists of an LED and photo transistor. When documents are placed on the ADF tray or are moving, a shutter in the document sensor opens. The light from the LED turns the photo transistor “ON”, and the output voltage from the sensor becomes a “Low”...
Page 223 DX-600/800 6.2.9 Control Panel The Control Panel consists of the Display PCB and Panel Unit, which display various status information.It is normally interfaced to the main CPU. Keyed input signals are received by the Panel CPU and the data is transferred to the main CPU on the SC PC Board.
Page 224 DX-600/800 6.2.10 Printer Motor Drive Circuit Motor Drive Circuit The Printer Motor is a 4-phase uni-polar PM-type step motor. The step signals (pMMP0A to pMMP3A) are transmitted to IC38 (the Chopper Drive Circuit) from IC3 SHINE output ports. The chopper current is determined by the voltage at IC38, Pin3 and Pin13.
Page 225 DX-600/800 Fuser Lamp Drive Circuit The Fuser Lamp is powered by 100 VAC (200 VAC). It is driven by the LVPS and controlled by the nSSR signal from the SC PC Board. When the CN103, Pin11 (nSSR) on the LVPS goes LOW, the Fuser Lamp turns ON.
Page 226 DX-600/800 Fuser Temperature Control Circuit The fuser temperature is controlled by IC1 on the SC PC Board, which contains A/D (Analog/Digital) converters ANI0 to ANI7. The Fuser Temperature Control Circuit uses A/D converter, ANI1. When the PC001 drive current is transmitted from the SC PC Board to the PSU (LVPS), the Fuser Lamp turns ON.
Page 227 DX-600/800 High Voltage Drive Circuit (Charging, Development and Transfer) High Voltage is provided through a DC to DC converter, which changes the +24 VDC supply voltage to - 650 VDC, and output approximately 0.64 KVAC (Steady current: 200 µA) for the Charging Block. The Developer Circuit converts the +24 VDC to between -300 VDC for the development bias, and outputs 1,500 VAC (p-p) at a frequency of 1.650 kHz to charge the toner.
Page 228 DX-600/800 6.2.11. Interlock Safety Circuit This safety circuit turns OFF the +24 VDC supply voltages when the Cover is opened. When the Cover is opened, the microswitch(es) on the ILS PC Board are de-actuated, turning OFF +24 VDC to the Printer Drive Circuit, the High Voltage Power Supply, and the Paper Feed Solenoid Circuits, turning OFF the +5 VDC supply voltage for the Laser Driver circuits on the Laser Unit.
Page 229 DX-600/800 6.2.12 Laser Unit (LSU) Control Circuit The laser control signals are described below. nLDEN The LSU is activated when this output signal is LOW. If an error occurs, the nLDEN output signal level goes High and the LSU is deactivated.
Page 230 DX-600/800 6.2.13 Power Supply Unit (LVPS) Block Diagram of DZEA000057 Edition 1.0 APR 2002...
Page 231 DX-600/800 DZEA000057 Input Circuit AC line voltage travels to the rectifying circuit through the line filter. The line filter eliminates RFI noise which may otherwise pass to the AC line from the power supply unit. It also protects the power supply unit from transient noise which may pass into the unit from the AC line.
Page 232 DX-600/800 The value of output voltage is Ton : ON time of Q100 Eo=d/(1-d)*Ei Ts : Period of oscillation d=Ton/Ts Equivalent circuit model for the RCC. In the equivalent circuit ; When SW is ON, current D(D102) flows (Q100) When SW is OFF, current flows The value of inductance increase current between ON period.
Page 233 DX-600/800 Over Current Limiter (O.C.L) The +24 VDC output is limited by Ton MAX Limiter (ON time period of transistor Q100) which is part of the control circuit. The +5 VP, -5 VDC and +5 VDC outputs have over current limiters provided inside the voltage regulator.
Page 234 DX-600/800 6.2.14 LAN Control Circuit LAN Controller Laser Printer MN86075 CCD PCB (IC30) LANB INTERNET SHINE (10Base-T/100Base-TX) DZAC000273 Transformer RJ45 (IC3) (T1) LANC S-DRAM 8MB (IC7) LINK LAN Controller (IC1) ACTIVITY Page Line Memory Memory D-BUS Buffer FROM 4MB MODEM...
Page 235 DX-600/800 1. LINK LED (LED1) The LINK LED normally illuminates when the LAN cable is connected and when a link pulse is detected. Consequently, LED can be used to determine whether the 10Base-T/100Base-TX cable has become disconnected (RX side). 2. Activity LED (LED2) This LED illuminates when reception data is present on the LAN.
Page 236: General Network Information
DX-600/800 7 General Network Information 7.1. Network Protocol 7.1.1. OSI Reference Mode Having a model in mind helps you understand how the pieces of the network puzzle fit together. The most commonly used model is the Open System Interconnection (OSI) reference model. The OSI model, first released in 1984 by the International Standards Organization (ISO), provides a useful structure for defining and describing the various processes underlying networking communications.
Page 237 DX-600/800 7.1.2. Protocol One reason for the popularity of TCP/IP is that no one vendor owns it, unlike the IPX/SPX, DNA, SNA or Apple Talk protocol suites, all of which are controlled by specific companies. TCP/IP evolved in response to input from a wide variety of industry sources.
Page 238: Layer Functions And Technology
DX-600/800 7.2. Layer Functions and Technology 7.2.1. MAC (Media Access Control) The MAC address is burnt into each network card for establishing addresses for nodes on the network. These addresses are hexadecimal in nature and are unique for each card. The First three bytes from the left end identify the manufacturer’s code that must be approved by IEEE (Institute of Electrical and...
Page 239 DX-600/800 A computer in the ring captures the token, if it has data to transmit, it holds the token and transmits a data frame. This data frame is passed to each computer in the ring, which checks whether it is the intended recipient of the frame.
Page 240 DX-600/800 7.2.3. Ethernet Ethernet is a very popular local area network architecture based on the CSMA/CD access method. The original ethernet specification was the basis for the IEEE 802.3 specifications. Typically, ethernet networks can use a bus physical topology, although, many varieties of ethernet such as 10Base-T uses a star physical topology and a bus logical topology.
Page 241 DX-600/800 TX (+) TX (+) TX (-) TX (-) RX (+) RX (+) RX (-) RX (-) Straight Cable Crossed Cable Ethernet Cable Pin Configuration All eight pins on the Ethernet cable are normally wired in this configuration accordingly. The Electrical level follows the Manchester code configuration.
Page 242: Network Layer
DX-600/800 7.3. Network Layer 7.3.1. IP Address An IP address is a set of four numbers, or octets, that can range in value between 0 and 255. Each octet is separated by a period (i.e. 192.168.31.1). All devices on a network that runs the TCP/IP protocol suite need a unique IP address.
Page 243 DX-600/800 7.3.2. Subnet Mask A subnet mask defines how sub-segments of a network are treated. 1 0 0 0 0 0 0 1 0 1 0 1 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 1 192.168.32.1...
Page 244 DX-600/800 7.3.3. Internet Protocol The IP (Internet Protocol) operating at the OSI Network layer, is a connectionless protocol that provides datagram service, and IP packets are most commonly referred to as IP data grams. It performs the following typical functions: 1.
Page 245 DX-600/800 7.3.4. Router Routers, operating at the OSI Network layer, organize the large network in terms of logical network segments. Each network segment is assigned an address so that every packet has both a destination network address and a destination device address.
Page 246: Transport Layer
DX-600/800 7.4. Transport Layer 7.4.1. TCP (Transmission Control Protocol) The TCP (Transmission Control Protocol) is an internetwork connection-oriented protocol that corresponds to the OSI Transport layer. TCP provides full-duplex, end-to-end connections. When the end-to-end communication acknowledgement is not required, the UDP (User Datagram Protocol) can be substituted for the TCP at the Transport (host-to-host) level.
Page 247 DX-600/800 Client Increments No. sequentially Server Panasonic Device TCP 3 Handshake General Flowchart The client generates random sequential numbers initially and sends them to the server. The initial sequential numbers are synchronized with the clock and increments the counter every 4 msec.
Page 248: Upper Layer
Usually, all of the devices on a given network will have the same right-hand portion of their Domain Names (i.e. panasonic.com in the examples above). It is also possible for a Domain Name to exist but not be connected to an actual device.
Page 249 DX-600/800 The Name resolution flow is shown in the illustration above and follows the sequence below: 1. Query the local DNS Server. 2. Query the root DNS Server because the domain belongs to a destination outside of the company. 3. Com root DNS Server sends the query to the jp root DNS Server.
Page 250 DX-600/800 7.5.4. SOA (Start of Authority) Record Each database file starts with a Start of Authority (SOA) record for the file. This record specifies the zone’s primary server, the server that maintains the read/write copy of the file. The syntax of this record is as follows: IN SOA <source host><contact email><serial No.><refresh time><retry time><expiration time><TTL>...
Page 251 DX-600/800 7.5.5. A (Address) Record The A (Address) Record, lists the addresses for a given machine. The name field is the machine’s name and the address is the network address. There should be one A record for each address on the machine.
Page 252 DX-600/800 7.5.8. NS (Name Server) Record The Name Server record specifies the other name servers for a domain. The syntax for a name server record is shown below: <domain> IN NS <nameserver host> An example of a name server record follows below: @ IN NS nwmgr.mgcs.mei.co.jp...
Page 253: Smtp
DX-600/800 7.6. SMTP (Simple Mail Transfer Protocol) The objective of Simple Mail Transfer Protocol (SMTP) is to transfer mail reliably and efficiently. SMTP is independent of the particular transmission subsystem and requires only a reliable ordered data stream channel. The SMTP design is based on the following model of communication: as the result of a user mail request, the sender-SMTP establishes a two-way transmission channel to a receiver-SMTP.
Page 254: Itu T.37 And Rfc2305
DX-600/800 7.7. ITU T.37 and RFC2305 7.7.1. Mode of Operation The Unit conforms to the ITU T.37 standards and RFC2305. This Internet store and forward facsimile uses approved IETF protocols for posting, relaying and delivery of documents. It requires no changes to Internet standards or to ITU Facsimile Recommendations.
Page 255 DX-600/800 Offramp Gateway (when implemented) Be SMTP compliant Provide delivery failure notification Be able to process PSTN/FAX email address Comply with the relevant ITU Recommendations relating to facsimile Required transmission Attempt to relay authorized email to the corresponding G3 facsimile...
Page 256 DX-600/800 7.7.4. File Format for Internet Fax Sending Internet Fax devices must be able to write minimum set TIFF files, according to the rules for creating minimum set TIFF files defined in TIFF for Facsimile (the S profile) [RFC2301], which is also compatible with the specification for the minimum subset of TIFF-F in [RFC2306].
Page 257 DX-600/800 7.7.5. Minimal Set The minimum interchange set of TIFF fields that must be supported by all implementations in order to assure that some form of an image, albeit black-and-white, can be interchanged. The table below summarizes the TIFF fields that comprise the minimal interchange set for black-and-white facsimile.
Page 258 DX-600/800 Note: For RFC2305, a PSTN address in an email address should follow the above style. The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” in this document are to be interpreted as described in RFC 2119.
Page 259 DX-600/800 Message Header Contents 7.7.8. Delivery Failure In the event of relay failure, the sending relay must generate a failure message, which should be in the format of a DSN. 7.7.9. Image File Format The Sending Internet Fax devices MUST be able to write minimum set TIFF files, according to the rules for creating minimum set TIFF files defined in TIFF for Facsimile (the S profile), which is also compatible with the specifications for the minimum subset of TIFF-F in F Profile for Facsimile, RFC 2306.
Page 260: Communication Protocols
The set of conventions necessary to achieve facsimile-compatible service covers basic data transport, document data formats, message (document) addressing, delivery confirmation, and message security. Protocol supported by the your Panasonic Device is as follows: SMTP Command & Reply Procedure SMTP Server your Panasonic Device (sv2.labo.mgcs.com)
Page 261 DX-600/800 7.8.1. Opening and Closing At the time the transmission channel is opened there is an exchange of commands to ensure that the hosts are communicating with the hosts they think they are. The following two commands are used in the transmission channel for opening and closing: HELO:<SP>...
Page 262 DX-600/800 7.8.10. NUMERIC ORDER LIST OF REPLY CODES System status or system help reply <domain> Service ready <domain> Service closing transmission channel Requested mail action okay# completed User not local; will forward to <forward-path> Start mail input; end with <CRLF>.<CRLF>...
Page 263: (Post Office Protocol Version 3)
DX-600/800 7.9. POP (Post Office Protocol Version 3) 7.9.1. Introduction On certain types of smaller nodes in the Internet it is often impractical to maintain a message transport system (MTS). For example, a workstation may not have sufficient resources (cycles, disk space) in order to permit a SMTP server and associated local mail delivery system to be kept resident and continuously running.
Page 264 DX-600/800 A POP3 server MAY have an inactivity auto logout timer. Such a timer MUST be of at least 10 minutes’ duration. The receipt of any command from the client during that interval should suffice to reset the auto logout timer. When the timer expires, the session does NOT enter the UPDATE state--the server should close the TCP connection without removing any messages or sending any response to the client.
Page 265 DX-600/800 POP 3 Command & Reply Procedure your Panasonic Device POP 3 Server (ef1.labo.mgcs.com) (sv2.labo.mgcs.com) Opening TCP Connection (TCP Port No. 110) TCP 3 way handshake & +OK POP Server ready Opening Session <1896.697170952@labo.mgcs.com> USER s50055 +OK Password required for s50055...
Page 266: Troubleshooting From A Pc
DX-600/800 7.10. Troubleshooting from a PC Troubleshooting is an art of seeking out the cause of a problem and eliminating the problem by managing of eliminating the cause. No matter what the problem is on your network, the OSI Reference Model serves as an excellent reference tool to help you locate the area of trouble.
Page 267: Verifying The Configuration And Mail Account Type (Smtp Or Pop)
? Is static IP address available ? Not supported DHCP Client? Is there a MX and A Record entry for your Panasonic Is G3 Gateway Device in the DNS table ? function being used ? Not supported Is POP account...
Page 268: Dynamic Host Configuration Protocol (Dhcp) - Extended Feature
DX-600/800 7.12. Dynamic Host Configuration Protocol (DHCP) - Extended Feature DHCP is based on the Bootstrap Protocol (BOOTP), adding the capability of automatic allocation of reusable network addresses and additional configuration options. The Dynamic Host Configuration Protocol (DHCP) provides configuration parameters to Internet hosts.
Page 269 DX-600/800 Following figure shows the timeline diagram of messages exchanged between DHCP client and servers when allocating a new network address. Server Client Server (not selected) (selected) Begins initialization Determines DHCPDISCOVER DHCPDISCOVER Determines configuration configuration DHCPOFFER DHCPOFFER Collects replies Selects configuration...
Page 270 DX-600/800 Several options have been defined so far. One particular option - the "DHCP message type" option - must be included in every DHCP message. This option defines the "type" of the DHCP message. Additional options may be allowed, required, or not allowed, depending on the DHCP message type.
Page 271: Message Disposition Notifications (Mdn) - Extended Feature
DX-600/800 7.13. Message Disposition Notifications (MDN) - Extended Feature The confirmation of delivery and processing are extensions to "Simple Mode of Facsimile Using Internet Mail" [RFC2305]. These are designed to be interoperable with the existing base of mail transfer agents (MTAs) and mail user agents (MUAs), and take advantage of existing standards for advanced functionality such as positive delivery confirmation and disposition notification.
Page 272 DX-600/800 For example, you may configure the MDN parameter from Options menu of Outlook Express. MDN request MDN notify Additional Document Capabilities Section 4 of "A Simple Mode of Facsimile Using Internet Mail" [RFC2305] allows sending only the minimum subset of TIFF for Facsimile "unless the sender has prior knowledge of other TIFF fields or values supported by the recipient."...
Page 273 DX-600/800 MDN Request Sample Mime-Version: 1.0 X-Mailer: Internet FAX, MGCS Content-Transfer-Encoding: 7bit Date: Wed, dd Mmm yyyy 15:20:00 -0500 Message-Id: <200202060018.12345@core.mega.edu> From: "MGCS Internet FAX" <fax@core.mega.edu> Subject: IMAGE from Internet FAX To: fax@huge.com Disposition-Notification-To: <fax@core.mega.edu> Content-Type: multipart/mixed; boundary="+-+-+-MGCS-+-+-+" (2) Recipient’s MDN Response Recipient (Internet FAX) starts printing process when the message is received properly.
Page 274 DX-600/800 (3) Processing Confirmation The processing confirmation provided by recipient is received and take specific services for expected several conditions respectively. This is unit independent issue. To see more detailed information, please refer to RFC2532 document. Edition 1.0 APR 2002...
Page 275: Lightweight Directory Access Protocol (Ldap) - Extended Feature
DX-600/800 7.14. Lightweight Directory Access Protocol (LDAP) - Extended Feature The protocol is designed to provide access to directories supporting the X.500 models, while not incurring the resource requirements of the X.500 Directory Access Protocol (DAP). This protocol is specifically targeted at management applications and browser applications that provide read/write interactive access to directories.
Page 276 DX-600/800 Client Server Establish TCP connection (TCP port No. 110) Challenge Response +OK POP3 server ready <1896.697170952@svr.mgcs.co.jp> <1896.697170952@svr.mgcs.co.jp> Digest parameter, Challenge + PASSWD <1896.697170952@svr.mgcs.co.jp>PASSWD APOP USER c4c9334bac560ecc979e58001b3e22fb Possible Responses: +OK maildrop has 1 message (369 octets) -ERR permission denied Produces a 16 octet digest value of...
Page 277: Smtp Service Extension For Authentication (Smtp Auth) - Extended Feature
DX-600/800 7.16. SMTP Service Extension for Authentication (SMTP Auth) - Extended Feature SMTP is widely deployed and high-quality implementations have proven to be very robust. However, the Internet community now considers some services to be important that SMTP AUTH is an SMTP service...
Page 278 DX-600/800 containing a BASE64 encoded string. If the client wishes to cancel an authentication exchange, it issues a line with a single "*". If the server receives such an answer, it must reject the AUTH command by sending a 501 reply.
Page 279: Direct Smtp Transfer - Extended Feature
(2) A parameter using the keyword "CONNEG" is added to the RCPT-TO command Sender Recipient Establish TCP connection TCP Port No. 25 EHLO Check for Capability 250 Response of CONNEG Capability contents sample 250-<june@panasonic.com> recipient ok MAIL FROM:<mgcs@panasonic.com> 250-(&(image-file-structure=TIFF-minimal) 250- (MRC-mode=0) 250- (color=Binary) 250- (|(&(dpi=204) 250- (dpi-xyratio=[204/98,204/196]) ) 250- (&(dpi=200) RCPT TO:<june@panasonic.com>...
Page 280: Installation
DX-600/800 8 Installation 8.1. Function Key Any function can be started by first pressing and then enter the function number, or by FUNCTION pressing scroll key repeatedly until the desired function appears on the display. Deferred Communication 1 = XMT...
Page 281: Main Unit And Accessories
DX-600/800 8.2. Main Unit and Accessories Unpack the carton and check that you have all the accessories illustrated. Toner Cartridge Recording Paper Tray Machine Operating Instructions Telephone Line Cable Power Cord CD-ROM Edition 1.0 APR 2002...
Page 282: Installing The Accessories
DX-600/800 8.3. Installing the Accessories Final Installed View Recording Paper Tray Hook the projections into the square holes on the machine. Handset [Available as an Option] Handset Cord Handset Cradle [Available as an Option] [Available as an Option] Hook the projections into the square holes on the machine.
Page 283: Installing The Toner Cartridge
DX-600/800 8.4. Installing the Toner Cartridge Unpack the Toner Cartridge and rock it back and forth as shown 5 or 6 times to even the Toner Cartridge toner inside. Remove the protective seal. Note: Pull on the seal slowly and straight ou Open the Printer Cover.
Page 284 DX-600/800 Align the projections on both sides of the Toner Cartridge with the grooves in the machine as shown and insert the Toner Cartridge into the machine. Note: Lock the Toner Cartridge into place by pressing the handle down and then pushing towards the rear of the machine.
Page 285: Cleaning The Printer Roller
DX-600/800 Cleaning the Printer Roller If you find toner on the back of the recording paper, the printer roller in the fuser unit is probably dirty. To clean the Printer Rollers MAINTENANCE (1-9) ENTER NO. OR * PRINTING * CLEANING CHARTS The machine will print out 3 Cleaning Charts.
Page 286: Loading The Recording Paper
DX-600/800 8.5. Loading the Recording Paper How to Load the Recording Paper Lift up the Paper Cassette slightly and slide it out from the machine. Paper Cassette Remove the Paper Cassette Cover. Cassette Cover 1. Remove the Shipping Screw securing the Pressure Plate.
Page 287 DX-600/800 1. Load the paper into the Paper Cassette. Slide the paper width guide to the left Max. Paper until it lightly touches the stack of paper Capacity Mark without bending the paper. The paper must fit squarely and firmly between the Paper Width Guide and the right side of tray.
Page 288: Adjusting The Paper Cassette For The Paper Length
DX-600/800 8.6. Adjusting the Paper Cassette for the Paper Length How to Adjust the Paper Cassette for the Paper Length The factory default Paper Length setting for the Paper Cassette is on Letter size. To change the paper length to A4 or Legal size, follow the steps below.
Page 289: Adjusting The Paper Cassette For The Paper Width
DX-600/800 8.7. Adjusting the Paper Cassette for the Paper Width How to Adjust the Paper Cassette for the Paper Width The factory default Paper Width setting for the Paper Cassette is on Letter/Legal size. To change the paper width to A4 size, follow the steps below.
Page 290: Connecting The Telephone Line Cable And Power Cord
DX-600/800 8.8. Connecting the Telephone Line Cable and Power Cord Power Cord Plug one end of the power cord into an ordinary 3 prong AC outlet and the other end into the receptacle on the rear of the machine. Warning: This apparatus must be properly grounded through an ordinary 3 prong AC outlet.
Page 291: Setting The Internet Parameters
DX-600/800 8.9. Setting the Internet Parameters Before starting, you will need a completed copy of page 19 (Pre Installation Information). For your machine to be able to operate on the Network properly, the following five (5) Basic Parameters must be pre- programmed into the machine.
Page 292: Setting The User Parameters For The Lan Interface
DX-600/800 Setting the User Parameters for the LAN Interface Depending on how your machine will be configured to communicate on the LAN, the appropriate parameters listed in the table below must be stored first. Parameter Comments DATE & TIME Current Date and Time.
Page 293 DX-600/800 Parameter Comments SELECTABLE Enter up to 10 Domain Names that can be selected after the Domain "@" DOMAINS key is pressed using the "\/ or /\" key during Manual email addressing. (Up (01) ~ (10) to 30 characters) REMOTE PASSWORD This is a security password that allows Remote Programming of the Internet Parameters and Auto Dialer or the retrieval of the Journal via an Email.
Page 294: Programming Or Retrieving Parameters Via Email
DX-600/800 8.10. Programming or Retrieving Parameters via Email Using Email to Program or Retrieve Parameters This feature is a powerful tool, which provides a convenient and easy way of retrieving or programming Internet Parameters, One-Touch, ABBR Dialing Numbers, Program keys and Journal retrieval from your PC by sending a text email message to your machine.
Page 295: To Input The Internet Parameters For The First Time
DX-600/800 To Input the Internet Parameters for the First Time Create a script in the message body of a plain text email and send it to your machine’s email address. The "Subject" line of the email must be as follows: where the "password"...
Page 296 DX-600/800 To Input the Internet Parameters for the First Time @sender to @end Defines the Sender information to be set in section (2) between @sender to @end block. Register up to 24 User Names and their Email Addresses for the Sender Selection feature (See page 149).
Page 297: To Retrieve The Internet Parameters For Backup
DX-600/800 To Retrieve the Internet Parameters for Backup To retrieve the existing Internet Parameters, send a plain text email to the your machine’s email address with the following command in the "Subject" line: where the "password" is the Remote Password programmed in your #get parameters(password)# machine’s User Parameters (i.e.
Page 298 DX-600/800 To Retrieve the Internet Parameters for Backup After receiving the email message requesting the Internet Parameters, your machine sends back an email to the address specified in the "From:" line with the Internet Parameters in the body of the email.
Page 299: To Edit The Retrieved Or Backup Internet Parameters File
DX-600/800 To Retrieve the Internet Parameters for Backup @select-domain to @end Defines up to 10 alternate Domain Names programmed in your machine for the Selectable Domains in section (3) between @select-domain to @end block. @relay-domain to @end Defines up to 10 Domain Names programmed in your machine that have been authorized to access your Internet Fax for Relayed XMT Request in section (4) between @relay-domain to @end block.
Page 300 DX-600/800 To Edit the Retrieved or Backup Internet Parameters File Your Machine s Internet Parameters Email Sample [Delete this header before sending the email.] Your machine’s email address. From This field is normally not visible when creating new email message(s).
Page 301 DX-600/800 To Edit the Retrieved or Backup Internet Parameters File @sender to @end Defines the Sender information to be set in section (2) between @sender to @end block. Edit, Delete or Register up to 24 User Names and their Email Addresses for the Sender Selection feature (See page 149).
Page 302: Using A Pc To Update The Auto Dialer Remotely
DX-600/800 Using a PC to Update the Auto Dialer Remotely This feature provides a convenient and an easy way to Update, Backup or Restore the Phone Book data right from your PC by sending a text email message to your machine.
Page 303: Deleting The Entire Auto Dialer
DX-600/800 Deleting the Entire Auto Dialer If you wish to delete the entire Auto Dialer data in your machine, type the following command in the body of the email message: @command delete @end This command can also be inserted before the @begin to @end block, to erase the entire Auto Dialer data first, then reprogram it with new data.
Page 304 DX-600/800 To Program One-Touch/ABBR. No. for the First Time Create a script in the message body of a plain text email and send it to your machine’s email address.The "Subject" line of the email must be as follows: where the password is the Remote Password programmed in your #set abbr(password)# machine’s User Parameters.
Page 305 DX-600/800 To Program One-Touch/ABBR. No. for the First Time Explanation of Contents Your machine’s email address. From This field is normally not visible when creating new email message(s). It is your default email address (email application), for retrieving the Phone Book data and for error message notification.
Page 306 DX-600/800 To Retrieve One-Touch/ABBR. No. Data for Backup To retrieve the existing auto dialer data, send a plain text email to your machine’s email address with the following command in the "Subject" line: where the "password" is the Remote Password programmed in your #get abbr(password)# machine’s User Parameters (i.e.
Page 307 DX-600/800 To Retrieve One-Touch/ABBR. No. Data for Backup After receiving the email message requesting the existing auto dialer data, your machine sends back an email to the address specified in the "From:" line with the auto dialer information in the body of the email.
Page 308 DX-600/800 To Edit the Retrieved or Backup One-Touch/ABBR. No. Data File After receiving your machine email with the auto dialer data, store the email file as text (.txt) on your PC for backup purposes. To change or update the auto dialer, follow the steps below: 1.
Page 309 DX-600/800 To Edit the Retrieved or Backup One-Touch/ABBR. No. Data File Your machine’s email address. From This field is normally not visible when creating new email message(s). It is your default email address (email application), for retrieving the One-Touch/ ABBR. No. data and for error message notification.
Page 310: Using Email To Retrieve The Journal
DX-600/800 Using Email to Retrieve the Journal To retrieve the existing Journal data, send an email to your machine’s email address with the following command in the "Subject" line: where the "password" is the Remote Password programmed in your #get jnl(password)# machine’s User Parameters (i.e.
Page 311: Customizing Your Machine
DX-600/800 8.11. Customizing Your Machine General Description Your fac simile machine has a variety of adjustabl e Fax Pa rameter s. Thes e parameters, listed in the Parameter Table, are pr eset for you a nd d o not need to be ch ang ed. If you do want to mak e a change , read th e table careful ly.
Page 312 DX-600/800 Fax Parameter Table Setting Parameter Setting Comments Number CONTRAST Normal Setting the home position of the CONTRAST key. Lighter Darker RESOLUTION Standard Setting the home position for the RESOLUTION. Fine S-Fine Halftone (Fine) Halftone (S-Fine) STAMP Setting the home position of the STAMP key.
Page 313 DX-600/800 Setting Parameter Setting Comments Number RECEIVE MODE Setting the receive mode. FAX/TEL TAM/FAX OPERATOR CALL Selecting the length of time that your machine signals TIMER sec. (rings) for an incoming voice call in Fax/Tel Auto Switching mode. sec. sec.
Page 314 DX-600/800 Setting Parameter Setting Comments Number INCOMPLETE FILE Invalid Selecting whether the machine retains the document SAVE in memory if the document is not successfully Valid transmitted. COPY REDUCTION Manual Selecting whether the machine performs the copy reduction ratio automatically or manually.
Page 315 REMOTE Invalid Selecting whether or not the machine accepts to DIAGNOSTIC update the firmware or Remote Diagnostics from the Valid remote station. Please ask your Panasonic Authorized Dealer for details. DIAGNOSTIC (----) Setting the password for Remote Diagnostic Mode. PASSWORD Please ask your Panasonic Authorized Dealer for details.
Page 316 POP Server. Valid IFAX RETURN Invalid Selecting whether to send a return receipt when RECEIPT receiving from another Panasonic Internet Fax. Valid EMAIL HEADER Selecting the header information to print when an FORMAT email is received. (Normally used for Troubleshooting.
Page 317 DX-600/800 Setting Parameter Setting Comments Number TRANSACTION Invalid Selecting whether the machine sends a transaction JOURNAL journal to the pre-programmed email address. Valid PC REMOTE Invalid Selecting whether the machine will accept commands UPDATE from an email application, to: Valid...
Page 318 DX-600/800 Setting Parameter Setting Comments Number DIRECT IFAX XMT Invalid Selecting whether to be prompted during One-Touch/ ABBR registration if the station you are programming Valid is to receive Internet Fax directly without going through a Mail Server. DELIVERY NOTICE...
Page 319: Options And Supplies
DX-600/800 Options and Supplies Options and Supplies Please contact your local Panasonic dealer for availability. 1. Options Order No. Picture Description UE-403176 Handset Kit 250 Sheet Letter / Legal / A4 Size Paper UE-409070 Cassette with the Feeder Unit UE-410046...
Page 320: Installing Optional 250 Sheet Paper Cassette (Ue-409070)
DX-600/800 Installing Optional 250 Sheet Paper Cassette (UE-409070) 1. Contents Qty. Description Part No. Remarks 250 Sheet Paper Cassette with Feeder Unit UE-409070 2. Installation Note: Install this Feeder Unit as the 2nd Feeder Unit only. (1) Disconnect the Telephone Line Cable (1009) and the Power Cord (1008).
Page 321 DX-600/800 (12) Insert the 250 Sheet Paper Cassette into the machine. (12) (13) Secure the 250 Sheet Paper Cassette with the 4 screws removed in step 10. (14) Place the machine upright. (15) Connect the CST2-SNS2 Harness (1035) into (15) the Connector CN66 on the SC PC Board.
Page 322: Installing Handset Kit (Ue-403176)
DX-600/800 Installing Handset Kit (UE-403176) 1. Contents Qty. Description Part No. Remarks Handset DZDU000031 Handset Cord DZFN000066 Cradle Assembly DZML000436 2. Installation (1) Disconnect the Power Cord (1108) and the Telephone Line Cable (1109). (2) Break off the protective tab on the TEL/HAND- SET Jack on the machine.
Page 323: Schematic Diagram
(T2) (L2(T)) * SRU LINE ARDY (L1(R)) USA, CAN:DZEP000499 Others :DZEP000168 (T1) RESET (68-pins) INTR0 (A32-068-020-BGBB) nWEL RDY/nBSY nWEH DZEP000635 (Continued on the next page) Model Drawing Name General Circuit DX-600 / 800 Diagram (1/2) Edition 1.0 APR 2002...
Page 324 CN82 DZEP000377 Pick-Up (B7B-PH-K-M) CN74 (B3B-PH-K-M) Solenoid +24VM CST2 CN70 nCCHK2 (B3B-PH-K-M) SNS2 nADF2 SNCMN Casette Detect Sensor DZFAP8732 CN71 No Paper Sensor CNA1003 (B2B-PH-K-S) CNA1003 Model Drawing Name General Circuit DX-600 / 800 Diagram (2/2) Edition 1.0 APR 2002...
Page 325: Sc Pc Board
DX-600/800 10.2. SC PC Board Model Drawing Name DX-600 / 800 SC PC Board (1/14) Edition 1.0 APR 2002...
Page 326 DX-600/800 Model Drawing Name DX-600 / 800 SC PC Board (2/14) Edition 1.0 APR 2002...
Page 327 I/O15 A[17] D[15] A[14] A[18] I/O16 A[15] A[19] A[16] A[20] N.C. N.C. A[21] N.C. # Not mounted 16Mbit 32Mbit FROM MBM29LV160B MBM29DL32XBD Not Mounted Mounted JP26 Model Drawing Name DX-600 / 800 SC PC Board (3/14) Edition 1.0 APR 2002...
Page 328 RA12 RA16 RA20 D[14] DD[14] D[14] DV[14] RA12 RA16 RA20 D[15] DD[15] D[15] DV[15] RA12 RA16 RA20 TC74VHC245FT RA22 RA24 RA26 RA28 DD[15-0] 003:C3;005:B1;014:B4 DV[15-0] 008:D4;014:C1 Model Drawing Name DX-600 / 800 SC PC Board (4/14) Edition 1.0 APR 2002...
Page 329 DX-600/800 Model Drawing Name DX-600 / 800 SC PC Board (5/14) Edition 1.0 APR 2002...
Page 330 DTC114EKA Gi:30min pHKOF CN18 nWAKUP 012:B3 2SC2412K R214 * :Mounted when having the function, the hook-off detection of the handset in the saving energy mode. Model Drawing Name DX-600 / 800 SC PC Board (6/14) Edition 1.0 APR 2002...
Page 331 R240 nREVCK CN17 nREVCK 001:D1 C143 50.0V 1000pF AGND CN17 MAGND NCU Interface Circuit #:Not Mounted CN17 Mounted the parts of this circuit,only S3000i. (excluded C155,C156,R252,R253) Model Drawing Name DX-600 / 800 SC PC Board (7/14) Edition 1.0 APR 2002...
Page 332 004:D4;014:C1 +24V 002:A4 nSYNC 004:D1 MCLKV AV[2-1] 004:D1 nLEDON DTC114EKA pLEDON 002:D1 R289 Gi:30min 004:D1 nFRPRSTV nFRIPV 004:D1 nWLV 004:D1;014:C3 2SD592A nRDV 004:D1;014:C3 #:Not Mounted MGND Model Drawing Name DX-600 / 800 SC PC Board (8/14) Edition 1.0 APR 2002...
Page 333 002:D4 pHSYNC CN68 nHSYNC R322 2.0W +24V TC7SH14FU +3.3V 2012 IC35 TC7SH14FU IC32 BA10393F CN68 nS/H DTC143ZKA MGND 2012 4.7K 002:D4 pS_H CN68 CN68 #:Not Mounted Model Drawing Name DX-600 / 800 SC PC Board (9/14) Edition 1.0 APR 2002...
Page 334 2SC2412K 500mA 001:A3 pADF1 4.7K 47uF 2012 2SD874A MGND MGND MGND R342 2SC2412K 2012 002:D4 MMP3 4.7K MGND 560.0 MGND MGND MGND step MGND #:Not Mounted Model Drawing Name DX-600 / 800 SC PC Board (10/14) Edition 1.0 APR 2002...
Page 335 R396 IC32 001:A3 THERM DTC143ZKA Gi:30min +3.3V Thermistor I/F +3.3V B2B-PH-K-S CN52 012:B3 nPWSAVE DTC114EKA Gi:30min 2SC2412K R395 2SC2412K CN52 001:D3 nPWOFF DTC114EKA Gi:30min #:Not Mounted Model Drawing Name DX-600 / 800 SC PC Board (11/14) Edition 1.0 APR 2002...
Page 336 001:A3 R426 pADF2 CN66 pADF2 008:D3 R436 pBZCLK 005:B4 pBZCLK CN14 pBZCLK CN66 001:A3 +3.3V CN66 R440 R441 001:A4;002:D4 nBPNT CN14 nBPNT C242 nBPNT 100pF Model Drawing Name DX-600 / 800 SC PC Board (12/14) Edition 1.0 APR 2002...
Page 337 CN94 nACK CN94 R447 PLP3216S121SL2 002:A1 CN92 CN94 nINT CN94 nSTB JP20 CN94 nAFTX CN94 nSELIN CN94 JP21 CN92 CN94 CN94 CN94 CN94 Not Mounted Model Drawing Name DX-600 / 800 SC PC Board (13/14) Edition 1.0 APR 2002...
Page 338 001:D2 CN12 CN93 INTR0 CN93 LANINT 001:A3 CN12 CN93 CN93 CN12 CN12 003:C3;004:C1;005:B1;014:C1 AD[15-1] DD[15-0] 003:C3;004:C4;005:B1 CN12 CN12 CN12 CN12 CN12 CN12 CN12 CN12 CN12 CN12 Model Drawing Name DX-600 / 800 SC PC Board (14/14) Edition 1.0 APR 2002...
Page 339: Pnl1 Pc Board
DX-600/800 10.3. PNL1 PC Board Model Drawing Name DX-600 / 800 PNL1 PC Board (1/2) Edition 1.0 APR 2002...
Page 340 10mm SW13 SW21 SW29 SW37 SW45 SW53 SW61 (A-POINT) JW45 0.125W PNLRXD EVQ11L04M-1 EVQ11L04M-1 EVQ11L04M-1 EVQ11L04M-1 EVQ11L04M-1 EVQ11L04M-1 EVQ11L04M-1 EVQ11L04M-1 JW47 0.125W JW46 0.125W PNLTXD KIN[7] Model Drawing Name DX-600 / 800 PNL1 PC Board (2/2) Edition 1.0 APR 2002...
Page 341: Mjr Pc Board
TC7S00F this function. IC20 *4 complies with the standard of the THS-56F * Not Mounted insertion loss in a certain destinations. GND1 * Not Mounted GND1 Model Drawing Name DX-600 / 800 MJR PC Board (1/1) Edition 1.0 APR 2002...
Page 342: Sns1 Pc Board
DX-600/800 10.5. SNS1 PC Board B3B-PH-K-M CN80 LDSC1 to SNS2 CN80 CN80 nCCHK1 CN81 nCCHK1 CN81 to SNS4 nRSEN CN81 CN81 LDRE CNA1003H01ME B4B-PH-K-M Model Drawing Name DX-600 / 800 SNS1 PC Board (1/1) Edition 1.0 APR 2002...
Page 343: Sns2 Pc Board
DX-600/800 10.6. SNS2 PC Board CNA1003H01ME B3B-PH-K-M nCCHK1 CN82 CN82 to SNS1 (LPC) LDSC1 CN82 Model Drawing Name DX-600 / 800 SNS2 PC Board (1/1) Edition 1.0 APR 2002...
Page 344: Sns3 Pc Board
DX-600/800 10.7. SNS3 PC Board to LPC to TONER CN83 CN84 TONER TONER CN83 CN84 CN83 CN84 B3B-PH-K-S LDSP1 CN83 nPCHK1 CN83 B5B-PH-K-M CNA1003H01ME Model Drawing Name DX-600 / 800 SNS3 PC Board (1/1) Edition 1.0 APR 2002...
Page 345: Sns4 Pc Board
CN87 PAPER EXIT SENSOR SC PCB (CN58) CNA1003H01ME B4B-PH-K-M LDRE CN85 nCCHK1 nCCHK1 T o: CN87 CN85 TIMING SENSOR nRSEN nRSEN CN87 CN85 (CN81) CN87 CN85 Model Drawing Name DX-600 / 800 SNS4 PC Board (1/1) Edition 1.0 APR 2002...
Page 346: Ccd Pc Board
DX-600/800 10.9. CCD PC Board " " Model Drawing Name DX-600 / 800 CCD PC Board (1/1) Edition 1.0 APR 2002...
Page 347: Ils Pc Board
DX-600/800 10.10. ILS PC Board S2(3)B-PH-K-S +24V CN73 T o: SC PCB AVM3958 SW101 (CN57) +24VD CN73 AVM3958 SW102 Model Drawing Name DX-600 / 800 ILS PC Board (1/1) Edition 1.0 APR 2002...
Page 348: Aci Pc Board
10.11. ACI PC Board AC Inlet NC-179-L3A Harness, ACI FBS8701 AC (L) T o: ACH1 (Black) FG (G) Power Supply Unit ACH1 (White) (CN101) AC (N) FG Strap FBS8702 Model Drawing Name DX-600 / 800 ACI PC Board (1/1) Edition 1.0 APR 2002...
Page 349: Power Supply Unit
DX-600/800 10.12. Power Supply Unit " " Model Drawing Name DX-600 / 800 HVPS (1/4) Edition 1.0 APR 2002...
Page 350 DX-600/800 " " Model Drawing Name DX-600 / 800 HVPS (2/4) Edition 1.0 APR 2002...
Page 351 DX-600/800 " " Model Drawing Name DX-600 / 800 HVPS (3/4) Edition 1.0 APR 2002...
Page 352 DX-600/800 " " Model Drawing Name DX-600 / 800 HVPS (4/4) Edition 1.0 APR 2002...
Page 353 DX-600/800 " " Model Drawing Name DX-600 / 800 LVPS (1/1) Edition 1.0 APR 2002...
Page 354: Lanb Pc Board
7 RX+ 10 TX+ TD+ 16 002:C4 DD[15-0] 5 RXC TDC 14 12 TXC RD- 2 6 RX- 11 TX- TD- 15 RDC 3 1CT:1CT 1CT:1 Model Drawing Name DX-600 / 800 LANB PC Board (1/2) Edition 1.0 APR 2002...
Page 355 CN96 ARDY CN96 nWRU_DQMU 001:A3 CN96 CN96 nRDD 001:A3 CN96 RESET CN96 pLANRST 001:A3 CN96 INTR0 CN96 pLANINT 001:A3 CN96 CN96 DD[15-0] 001:A4 001:A2 AD[15-1] Model Drawing Name DX-600 / 800 LANB PC Board (2/2) Edition 1.0 APR 2002...
Page 356: Lanc Pc Board
CN201 CN200 CN201 CN200 CN201 CN200 CN201 CN201 To:LANB PCB(CN97) B3B-PH-K-S CN201 CN202 CN201 ACTIVITY BVH-410G1G LED2 0.25W CN202 CN201 LINK CN202 BVH-410G1G LED1 0.25W TW-4BS-2K Model Drawing Name DX-600 / 800 LANC PC Board (1/1) Edition 1.0 APR 2002...
Page 357 memo...
Page 358 DZZSM00184-0...

This manual is also suitable for:

Dx-800

Panasonic DX-600 Service Manual

Specifications Table

Disassembly Instructions

Maintenance, Adjustments and Check Points

Troubleshooting

Service Modes

System Description

General Network Information

Installation

Options and Supplies

Schematic Diagram

Quick Links

Troubleshooting

Related Manuals for Panasonic DX-600

Summary of Contents for Panasonic DX-600

This manual is also suitable for:

Table of Contents