Lcd Panel - Dell PowerEdge R430 Owner's Manual
Hide thumbs
Also See for PowerEdge R430:
- Owner's manual (188 pages) ,
- Getting started (2 pages) ,
- Owner's manual (159 pages)
Table of Contents
Advertisement
Item
Indicator, Button, or
Connector
5
System identification
button
6
Hard drives
LCD panel
The LCD panel of your system provides system information, status, and error messages to indicate if the
system is functioning correctly or if the system needs attention. For more information about error
messages, see the Dell Event and Error Messages Reference Guide at Dell.com/
openmanagemanuals >OpenManage software.
•
The LCD backlight turns blue during normal operating conditions.
•
When the system needs attention, the LCD turns amber, and displays an error code followed by
descriptive text.
NOTE: If the system is connected to a power source and an error is detected, the LCD turns
amber regardless of whether the system is turned on or off.
•
The LCD backlight is turned off when the system is in standby mode and can be turned on by pressing
either the Select, Left, or Right button on the LCD panel.
•
The LCD backlight remains off if LCD messaging is turned off using the iDRAC utility, the LCD panel,
or other tools.
Figure 6. LCD panel features
Icon
Description
Press the system ID button:
•
To locate a particular system within a rack.
•
To turn the system ID on or off.
To reset iDRAC, press and hold the button for
more than 15 seconds.
NOTE: To reset iDRAC using system ID,
ensure that the system ID button is enabled in
the iDRAC setup.
NOTE: If the system stops responding during
POST, press and hold the system ID button
(for more than five seconds) to enter the BIOS
progress mode.
Up to 10 x 2.5 inch hard drives/SSDs.
For information about the supported hard drives,
see the Technical specifications section.
17
Advertisement
Table of Contents
Troubleshooting
