Canon imageRUNNER 7095 Service Manual page 436
Hide thumbs
Also See for imageRUNNER 7095:
- Brochure & specs (8 pages) ,
- Specifications (4 pages) ,
- Driver manual (180 pages)
Table of Contents
Advertisement
Chapter 16
Code
Description
*: model equipped with DADF-Q1 (outside Japan, iR7105/7095; inside Japan: iR7105/7095/7086).
**: model equipped with DADF-M1 (outside Japan: iR7086).
E240 **
A fault exists in the communication between the main controller and the DC controller.
E248
A fault exists in the following: main controller SRAM, reader controller EEPROM.
E251
The inverter cooling fan rotation is faulty.
E302
Shading operation is faulty.
E315
The image data codec has a fault.
E351
An error has occurred in the main controller communication.
E400 **
An ADF communication error has occurred.
E402 *
The ADF belt motor rotation is faulty.
E404 *
The ADF delivery motor rotation is faulty.
E405 *
The ADF separation motor rotation is faulty.
E410 *
The ADF pickup motor rotation is faulty.
E413 **
The ADF shift motor rotation is faulty.
E420 *
An ADF EEPROM read error has occurred.
E490
The ADF is of the wrong type.
E602
The HDD has an error.
E604
The time memory (DDR-SDRAM) is faulty or inadequate.
E609
The HDD temperature is abnormally low.
E610
The HDD encryption key is faulty.
E711
An error has occurred in the communication between the pickup/delivery accessory and the
printer unit.
E712
An error exists in the communication between the ADF and the reader unit.
E717
An error exists in the communication with the NE controller.
After correcting the fault, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR)
E719
An error has occurred in the communication with the coin vendor/card reader.
After correcting the fault, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR)
E730
A PDL-related error has occurred.
E732
An error has occurred in the communication between the reader unit and the main
controller.
E733
An error has occurred in the communication between the reader unit and the main
controller.
E740
An error exists in the LAN controller.
E743
A fault exists in the communication between the main controller and the reader controller.
E744
An error exists in the language file/boot ROM.
E746
An unsupported optional board has been detected.
E749
Restart in accordance with a change of the product configuration
E800
The auto power-off circuit has an error.
E804
The rotation of the following is faulty: power supply cooling fan 1, power supply cooling fan
2, controller cooling fan.
E805
The fixing heat discharge fan rotation is faulty.
E820
The drum fan rotation is faulty.
E823
The pre-transfer charging assembly fan rotation is faulty.
E840
An HP detection error has occurred in relation to the fixing inlet sensor (fixing wrap jam
detection).
E850
There is a fault in the double-feeding detection unit.
16-2
Advertisement
Chapters
Table of Contents
