Panasonic WV-SPW631LT Installation Manual
Hide thumbs
Also See for WV-SPW631LT:
- Operating instructions manual (212 pages) ,
- Operating instructions manual (226 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Installation Guide
Included Installation Instructions
Network Camera
WV-SPW631LT
Model No.
WV-SPW631L
WV-SPW611L
WV-SPW611
(This illustration represents WV-SPW611.)
Before attempting to connect or operate this product, please read these
instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
This document is the Installation Guide for use in other countries except Japan.
Advertisement
Table of Contents
Related Manuals for Panasonic WV-SPW631LT
Summary of Contents for Panasonic WV-SPW631LT
-
Page 1: Installation Guide
Installation Guide Included Installation Instructions Network Camera WV-SPW631LT Model No. WV-SPW631L WV-SPW611L WV-SPW611 (This illustration represents WV-SPW611.) Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual. - Page 2 For Europe We declare under our sole responsibility that the WARNING: product to which this declaration relates is in • To prevent injury, this apparatus must be conformity with the standard or other normative securely attached to the floor/wall/ceiling in document following provisions...
-
Page 3: Table Of Contents
Contents Important safety instructions ......................4 Limitation of liability ........................5 Disclaimer of warranty ........................5 Preface ............................5 About notations ..........................6 Main functions ..........................6 About the user manuals ........................ 7 System requirements for a PC ...................... 7 Trademarks and registered trademarks.................. -
Page 4: Important Safety Instructions
Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not block any ventilation openings. Install in accordance with the manufacturer's instruc- tions. 6) Do not install near any heat sources such as radiators, heat registers, stoves, or other appara- tus (including amplifiers) that produce heat. 7) Only use attachments/accessories specified by the manufacturer. 8) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combi- nation to avoid injury from tip-over. -
Page 5: Limitation Of Liability
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW: (1) ANY LOSS OR DAMAGE, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;... -
Page 6: About Notations
About notations The following notations are used when describing the functions limited for specified models. The functions without the notations are supported by all models. : The functions with this notation are available when using the model WV-SPW631LT. SPW631LT : The functions with this notation are available when using the model WV-SPW631L. SPW631L : The functions with this notation are available when using the model WV-SPW611L. SPW611L : The functions with this notation are available when using the model WV-SPW611. SPW611 Main functions Equipped with a new codec engine The redesigned codec engine can output up to 60 frames per second in Full-HD ( SPW631L SPW631LT quality. The equipped enhanced Super Dynamic function makes it possible to achieve 133 dB dynamic range. By combining images taken at different shutter speeds and using pixel level brightness correction, more natural looking pictures can be taken even when objects have large differences in illumination. -
Page 7: About The User Manuals
*3 I P66 rating: The applicable product has "Dust tight (6)" protection against foreign solids and has "Powerful water jets (6)" against water (IEC60529). *4 N EMA: Dust resistance and waterproof performance standards set by National Electrical Manufacturers Association (United States). About the user manuals There are 2 sets of operating instructions for the WV-SPW631LT, WV-SPW631L, WV-SPW611L, WV-SPW611 as follows. • Installation Guide: Explains how to install and connect devices. • Operating Instructions (included in the CD-ROM): Explains how to perform the settings and how to operate this camera. -
Page 8: Trademarks And Registered Trademarks
® Windows / Internet Explorer versions". • For information on the operation verification of the supported operating systems and web brows- ers, refer to our website at http://security.panasonic.com/pss/security/support/index.html. Trademarks and registered trademarks • Adobe, the Adobe logo, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. • Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX, and DirectX are either regis- tered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. -
Page 9: Network Security
Network security As you will use this unit connected to a network, your attention is called to the following security risks. q Leakage or theft of information through this unit w Use of this unit for illegal operations by persons with malicious intent e Interference with or stoppage of this unit by persons with malicious intent It is your responsibility to take precautions such as those described below to protect yourself against the above network security risks. • Use this unit in a network secured by a firewall, etc. • If this unit is connected to a network that includes PCs, make sure that the system is not infected by computer viruses or other malicious entities (using a regularly updated anti-virus program, anti-spyware program, etc.). -
Page 10: Precautions
Precautions Refer installation work to the dealer. Avoid installing this bracket in the loca- Installation work requires technique and experi- tions where salt damage occurs or corro- ences. Failure to observe this may cause fire, sive gas is produced. electric shock, injury, or damage to this product. Otherwise, the mounting portions will deterio- Be sure to consult the dealer. - Page 11 Do not touch this product, the power cord [Precautions for use] or the connected cables during thunder. This product has no power switch. (even in the process of work) When turning off the power, disconnect the Failure to observe this may cause electric shock. power supply from the 12 V DC power supply or the PoE device. (When using both the 12 V DC Keep SD memory card away from infants and children.
- Page 12 About the automatic status detection caused by the relationship between the periodic function movements of the camera and the timing that the image sensor reads images. This is not a prob- When this product malfunctions due to exoge- nous noise, etc. for 30 seconds or more, the lem with the camera. To reduce the possibility of this phenomenon occurring, install the camera in product will automatically reset and will return to normal state. When the product is reset, initializa- a secure location. tion will be carried out as when the power of the About SD memory card product is turned on. When the product repeat- • To remove the SD memory card, hold edly resets, exogenous noise level around the...
- Page 13 Code label The code labels (accessory) are required at inquiry for trouble. Use caution not to lose these labels. It is recommended to paste one of the labels onto the CD-ROM case. AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO") AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE...
-
Page 14: Precautions For Installation
Precautions for installation Panasonic assumes no responsibility for injuries or property damage resulting from fail- ures arising out of improper installation or operation inconsistent with this documenta- tion. Installing place Design and engineer the power supply system to turn on/off the power of this... - Page 15 Radio disturbance Time & date setting When this product is used near TV/radio anten- It is necessary to set the time & date before put- na, strong electric field or magnetic field (near a ting this product into operation. Refer to the motor, a transformer or a power line), images Operating Instructions on the provided CD-ROM may be distorted and noise sound may be pro- for descriptions of how to perform the settings. duced. LAN cable Take notice of humidity. Shielded (STP*) LAN cables must be used with Install this product when the humidity is low. If this unit to ensure compliance with EMC stan- this product is installed during rainfall or at a dards.
-
Page 16: Major Operating Controls
Major operating controls Rear part of sunshield Sunshield Front cover Rear cover Safety wire Tilting lock screw Panning lock screw (This illustration represents WV-SPW611.) Network cable RJ-45 (female) EXT I/O terminal Alarm input/output cable Power cable (12 V DC) Microphone/line input cable (white) Audio output cable (black) Camera mount bracket (accessory) - Page 17 Mount bracket cover x2 (This illustration represents WV-SPW611.) (accessories) Link indicator (lit when linking) SD slot 1 (SD1) Access indicator (lit when accessing) SD slot 2 (SD2) SD memory card error indicator/Auto focus SD memory card slot indicator (blinks when adjusting auto focus) Auto focus (AF) button TELE button WIDE button...
-
Page 18: Preparations
Preparations • The camera mount bracket (accessory) can be directly mounted on the wall using a junction box (locally procured) embedded in the wall, or a wall with a cable access hole. • The screws that secure the camera mount bracket on a wall are not supplied. Prepare the screws according to the material, structure, strength and other factors of the mounting area and the total weight of objects to be mounted. IMPORTANT: • Prepare the mounting screws according to the material of the area where the camera mount bracket and the adapter box are to be installed. In this case, wood screws and nails should not be used. Recommended tightening torque M4: 1.57 N·m {1.16 lbf·ft} • Required pull-out capacity of a single screw/bolt is 196 N {44.06 lbf} or more. • If a wall or ceiling board such as plaster board is too weak to support the total weight, the area shall be sufficiently reinforced. -
Page 19: Installations/Connections
Installations/Connections Secure the camera to the camera mount bracket The tilt angle is locked downward at shipment. L oosen the tilting lock screw approx. 1 rotation and adjust the tilt angle of the camera to the horizontal position. Tighten the tilting lock screw again after tilt angle adjustment. Note: • Use a hexagonal wrench with width across flats of 4 mm (locally procured) to loosen or tighten the tilting lock screw. Tilting lock screw Horizontal Camera main body Approx. 90 ° P ass each cable and the safety wire through the camera mount bracket, and secure the cam- era to the camera mount bracket with the camera fixing screws x3 (accessories). Pass the network cable first through the camera mount bracket before passing through the other cables. - Page 20 R emove the screws from the mounting boss of the safety wire and the mounting boss of the cable clamp. S ecure the safety wire with the screw from the mounting boss. Then, bundle the wire and the cable using the cable clamp and secure them with each screw from the mounting boss as illustrated. IMPORTANT: • Ensure that the safety wire is firmly secured. Recommended tightening torque: 0.59 N·m {0.44 lbf·ft} Connection Turn off a circuit breaker before making a connection. Before starting the connection, prepare the required devices and cables. LAN cable Network cable (category 5 or better, straight, STP) RJ-45 (female) Alarm input/output cable 4P alarm cable (accessory) 12 V DC (red)
- Page 21 C onnect an external amplifier-embedded speaker to the audio output cable. Connect a stereo mini plug (ø3.5 mm) (Audio output is monaural.). • Output impedance: Approx. 600 Ω (unbalanced) • Recommended cable length: Less than 10 m {32.8 ft} • Output level: –20 dBV * Use an external powered speaker. IMPORTANT: • C onnect/disconnect the audio cables and turn on the power of the camera after turning off the power of the audio output devices. Otherwise, loud noise may be heard from the speaker. • M ake sure that the stereo mini plug is connected to this cable. When a monaural mini plug is connected, audio may not be heard. When connecting a monaural speaker with amplifier, use a locally procured conversion cable (mono-stereo). Connect the alarm input/output cable. 4P alarm cable GND (black) ALARM IN3, AUX OUT (gray) (Terminal 3) ALARM IN2, ALARM OUT (red) (Terminal 2) ALARM IN1, DAY/NIGHT IN (green) (Terminal 1)
- Page 22 Connect a LAN cable (category 5 or better, straight, STP: For Europe) to the network connector. IMPORTANT: • Use all 4 pairs (8 pins) of the LAN cable (category 5 or better, straight, STP: For Europe). • The maximum cable length is 100 m {328 feet}. • Make sure that the PoE device in use is compliant with IEEE802.3af standard. • When connecting both the 12 V DC power supply and the PoE device for power supply, 12 V DC will be used for power supply*. * If a 12 V DC power supply and a PoE hub or router are used at the same time, network con- nections may not be possible. In this case, disable the PoE settings. Refer to the operating instructions of the PoE hub or router in use. * In the situation where a 12 V DC power supply and a PoE hub or router are used at the same time and the 12 V DC power supply is then disconnected, the power supply may be stopped and the camera may restart depending on the PoE hub or router used. • When the LAN cable is disconnected once, reconnect the cable after around 2 seconds. When the cable is quickly reconnected, the power may not be supplied from the PoE device. • When cables are used outdoors, there is a chance that they may be affected by lightning. In this case, install a lightning arrester just before where the cables connect to the camera. Connect the power cable. Power cable Caution: 12 V DC • A READILY ACCESSIBLE DISCONNECT DEVICE SHALL BE Red Positive INCORPORATED TO THE EQUIPMENT POWERED BY 12 V DC Black Negative POWER SUPPLY.
- Page 23 Waterproof treatment for the cable joint sections Adequate waterproof treatment is required for the cables when installing the camera with cables exposed or installing it under the eaves. The camera body is waterproof, but the cable ends are not waterproof. Be sure to use the supplied waterproof tape (accessory) at the points where the cables are connect- ed to apply waterproof treatment in the following procedure. Failure to observe this or use of a tape other than the provided waterproof tape (such as a vinyl tape) may cause water leakage resulting in malfunction. LAN cable Wind the tape in a half- overlapping manner. Alarm input/output cable, power cable, microphone/ line input cable, audio output cable Wind the tape in a half-overlapping manner.
- Page 24 Connection example when connecting to a network using a PoE hub Adjustment monitor PoE device (hub) Powered speaker LAN cable (category 5 or better, straight, STP: For Europe) LAN cable Microphone (category 5 or better, straight, STP: For Europe) Powered speaker LAN cable (category 5 or better, straight, STP: For Europe) Adjustment monitor...
- Page 25 Secure the camera mount bracket when the camera is directly installed on a wall 6 mm (W) x 10 mm (L) {1/4" (W) x 3/8" (L)} (long hole) 46 mm Use 4 screws (locally {1-13/16"} procured) to secure the 20 mm camera mount bracket to a {13/16"} wall or a junction box (locally procured). Required pull-out capacity of a single screw/bolt is 196 N Cable access hole Mounting screw x4...
- Page 26 • If a junction box is used, putting the View from above (internal) boxes side by side is recommended as shown in the 46 mm 83.5 mm illustration at right. {1-13/16"} {3-1/4"} Unused junction (Use unused boxes junction boxes to 6 mm (W) x 10 mm (L) pass cables {1/4" (W) x 3/8" (L)} through for easy (long hole) cabling.) Junction boxes Mounting screw x4 (locally procured) Attach the camera mount bracket to the left...
- Page 27 Secure the mount bracket cover x2 (accessories) to the camera Mount bracket cover x2 (accessories) mount bracket with the 2 mount bracket cover screws (accessories). IMPORTANT: • Ensure that the mount bracket cover screws are firmly secured. Camera mount bracket (accessory) Recommended tightening torque: 0.59 N·m {0.44 lbf·ft} Mount bracket cover screw x2 (M3 x 6) (accessories)
-
Page 28: Insert/Remove An Sd Memory Card
Insert/remove an SD memory card IMPORTANT: • Before inserting an SD memory card, make sure to turn off the power. • When inserting an SD memory card, make sure the direction. • Before removing the SD memory card, make sure to select “Not use” for “SD memory card” on the [SD memory card] tab of the “Basic” page on the setup menu first. ( Operating ☞ Instructions (included in the CD-ROM)) Label side Loosen the 4 fixing screws of the front cover to remove the front cover. I nsert an SD memory card fully into the SD memory card slot until a click is heard. -
Page 29: Adjustment
Adjustment Be sure to view the monitor for adjustment when the camera angle is adjusted. Supply power to this unit, connect the monitor for adjustment (e.g. a small LCD) to the monitor output jack, and adjust the camera angle (turn off the power after view angle adjustment for safety). q Loosen the 4 fixing screws of the front cover to remove the front cover. w C onnect the monitor output jack and the monitor for adjustment with the RCA pin cable (locally procured). Front cover Monitor output jack Fixing screw x4 <Front cover> (This illustration represents WV-SPW611.) - Page 30 Adjust the angular field of view and the focus. Adjust the angular field of view in accordance with the distance between the camera lens and a photographic subject. These adjustments shall be performed together with the camera angle adjustment. Auto focus (AF) button TELE button WIDE button (This illustration represents WV-SPW611.) When adjusting the angular field of view and the focus from the setup menu Refer to the Operating Instructions (included in the CD-ROM) for how to perform the manual focus adjustment from the setup menu. When adjusting the angular field of view and the focus with the panel of the camera q Press the TELE or WIDE buttons to move the knob between TELE and WIDE to obtain the appropriate angular field of view.
- Page 31 Note: • When shooting in the following place or the following subjects, focus may not be adjusted automatically. In this case, adjust the focus manually from the setup menu. Refer to the Operating Instructions (included in the CD-ROM) for how to perform the manual focus adjust- ment from the setup menu. • Subj. with large illuminance change • Subj. moving frequently • Subj. with reflection or extra brightness • Subj. with low illuminance • Place where the front cover easily becomes dirty • Subj. through a window...
-
Page 32: Mounting The Front Cover
Mounting the front cover Mount the front cover. Fixing screw x4 IMPORTANT: • The tightening torque described below shall be followed for the 4 fixing screws of front cover. Recommended tightening torque: 0.59 N·m {0.44 lbf·ft} • The tightening sequence of the 4 fixing screws of the front cover shall be observed and repeat- ed twice as described in the illustration above. ((1) → (2) → (3) → (4), twice) • Make sure the packing has not come off or become askew. If this happens put it back into place. -
Page 33: Attaching The Mounting Surface On The Top Surface Of The Camera Body
Attaching the mounting surface on the top surface of the camera body When the mounting surface is changed to the top surface of the camera body Remove the 4 sunshield fixing screws from the camera body and remove the sunshield. Remove the 4 tripod head fixing screws from the camera body and remove the tripod head. Tripod head Tripod head fixing screw x4 Loosen the fixing screw x1 and remove the rear cover, and remove the cap. Rotate each cable in the direction of the arrow (clockwise) as illustrated and pass them between opening in the upper groove of the main body. Then, attach the cap to the lower groove, and secure the rear cover with the fixing screw x1. Rear cover Fixing screw x1 Attach the rear cover to the front cover by hooking attachment hole 1 of the rear cover to the tab on the front cover while passing the protrusion of the front cover through attachment hole 2 of the rear cover. Tab Protrusion Attachment hole 1 Upper groove Attachment hole 2... - Page 34 Mount the tripod head on the top of the camera body with the 4 tripod head mounting screws that were removed in the step 2. IMPORTANT: • Caution shall be taken to prevent each cable from being caught between the camera body and tripod head. • Be sure to use the screws that were removed from the tripod head. Recommended tightening torque: 0.59 N·m {0.44 lbf·ft} Secure the camera to the camera mount bracket with the camera fixing screws x3. Pass each cable and the safety wire through the camera mount bracket, and connect the safe- ty wire to the camera mount bracket. Then, bundle the wire and the cable using the cable clamp and secure them with each screw from the mounting boss to the camera mount bracket page 19-20). ☞ Camera mount bracket (accessory) Camera fixing screw x3 (M4 x 10) (accessories) Tripod head fixing screw x4 (M3x10) Camera main body IMPORTANT: • Be sure to use the screws that were removed from the camera mount bracket. Recommended tightening torque: 0.78 N·m {0.58 lbf·ft} • Be sure to use the screws that were removed from the safety wire.
- Page 35 Remove the sunshield backside. As illustrated, opening up the sunshield in both directions makes it easier to remove the rear part of the sunshield. • When installing the camera to a ceiling, the rear part of the sunshield and the fixing screws are not used. Fixing screw x2 Rear part of sunshield Mount the sunshield on the camera body with the 4 sunshield mounting screws after removing the sunshield backside. • The sunshield is attached to the camera by inserting the protrusions on the rear cover of the camera into the attachment holes on the rear part of the sunshield. Attachment hole Rear part of sunshield Protrusion IMPORTANT: • Be sure to use the screws that were removed from the sunshield. Recommended tightening torque: 0.59 N·m {0.44 lbf·ft}...
-
Page 36: Configure The Network Settings
Configuring the camera so that it can be accessed from a PC The following are descriptions for when the camera with default settings is configured. If you are using firewall software on your PC, the Setup Program may not be able to find any cameras on your network. Configure the setting of the camera after temporarily invalidating the firewall software. Contact the network administrator or your Internet service provider for information about configuring the settings of the network. Insert the provided CD-ROM into the CD-ROM drive of your PC. • The License Agreement will be displayed. Read the Agreement and choose “I accept the term in the license agreement”, and click [OK]. • The launcher window will be displayed. If the launcher window is not displayed, double click the “CDLauncher.exe” file on the CD-ROM. Note: • R efer to “Using the CD-ROM” in the Operating Instructions on the provided CD-ROM for fur- ther information about CDLauncher. Click the [Run] button next to [IP Setting Software]. [Panasonic IP Setting] screen will be displayed. Click the [Network Settings] button after select- ing the MAC address/IP address of the camera to be configured. - Page 37 Select the camera you want to configure, and click [Access Camera]. Note: • When cameras are displayed in [Panasonic IP Setting] screen, click the camera with same MAC address as the MAC address printed on the camera that you want to configure. If the installation screen of the viewer software “Network Camera View 4S” is displayed, follow the instructions of the wizard to start the installation. (The viewer software is installed from the camera.) • The “Live” page will be displayed. • If you cannot install the viewer software “Network Camera View 4S” or if images are not displayed, click the [Install] button next to [Viewer Software] on the launcher window to install the software. • Perform the [Time & date] settings in the “Setup” - “Basic” page before using the camera. Note: • W hen no image is displayed on the “Live” page, refer to the Troubleshooting in the Operating Instructions on the provided CD-ROM. • I t is possible to enhance the network security by encrypting the access to cameras using the HTTPS function. Refer to the Operating instructions on the provided CD-ROM for how to con- figure the HTTPS settings.
-
Page 38: Troubleshooting
Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Reference Symptom Cause/solution pages When using DC power supply • Is 12 V DC power supply connected to the 2P power supply cable? → Check whether the connection is appro- priately established. • Is the AC adapter in use compliant with the Specifications? → Check the Specifications regarding AC adapter. - Page 39 • Isn't the LAN cable connected to the camera camera. broken? → Replace the cable with another one. • Isn’t the write protect switch of the inserted SD memory card set to “LOCK”? → Unlock the write protect switch of the SD memory card. • Hasn't the inserted SD memory card been for- matted on a PC? Operating → Use an SD memory card formatted on the Instructions AF/SD ERROR indicator camera. (included in lights red or blinks red. Or install the software to format the SD the CD-ROM) memory card on the PC. Refer to our website (http://security.panasonic.com/ pss/security/support/info.html) for further information about the supported software. • Isn't the inserted SD memory card faulty? → Replace the card with a normal one.
-
Page 40: Specifications
ø3.5 mm monaural mini jack Input impedance: Approx. 2 kΩ (unbalanced) For microphone input: Applicable microphone: Plug-in power type Supply voltage: 2.5 V±0.5 V Recommended sensitivity of microphone: –48 dB±3 dB (0 dB=1 V/Pa, 1 kHz) For line input: Input level: Approx. –10 dBV Audio output: ø3.5 mm stereo mini jack (monaural output) Output impedance: Approx. 600 Ω (unbalanced) External speaker with an amplifier Output level: -20 dBV Waterproof* Main body: I P66 (IEC60529), Type 4X (UL50), NEMA 4X compliant Dimensions: 94 mm (W) x 89 mm (H) x 226 mm (L) {3-45/64 inches (W) x 3-1/2 inches (H) x 8-57/64 inches (L)} Mass: Approx. 1.4 kg {3.09 lbs} Finish: Main body: Aluminum die cast (Light gray) Dome cover: Clear polycarbonate resin *1 R efer to our website (http://security.panasonic.com/pss/security/support/info.html) for further infor- mation about Power source and Power consumption information. *2 W hen using this product without turning the power off. (However, the temperature inside the camera shall be -10 °C {14 °F} or higher.) Perform settings or startup operations when the ambient temperature is -30 °C {-22 °F} or higher. The auto focus function is not available until the heater unit of the camera raises the internal temperature of the camera. *3 O nly when installation work is properly performed according to the instructions in this book and appropriate waterproof treatment is performed. - Page 41 Camera • Image sensor: SPW631LT SPW631L Approx. 1/2.8 type MOS image sensor SPW611L SPW611 Approx. 1/3 type MOS image sensor Built-in primary color filter Effective pixels: SPW631LT SPW631L 1944 (H) x 1213 (V) Approx. 2.4 mega pixels SPW611L SPW611 1296 (H) x 1032 (V) Approx. 1.3 mega pixels Scanning area: SPW631LT SPW631L 5.346 mm (H) x 3.336 mm (V) {7/32 inches (H) x 1/8 inches (V)} SPW611L SPW611 4.864 mm (H) x 3.891 mm (V) {3/16 inches (H) x 5/32 inches (V)} Scanning system: Progressive Minimum illumination: SPW631L Color : 0.04 lx {0.00372 foot-candle} (F1.3, Maximum shutter: Off (1/30 s), AGC: High) 0.003 lx {0.00028 foot-candle} (F1.3, Maximum shutter: max. 16/30 s, AGC: High)* BW : 0 lx {0.000 foot-candle} (F1.3, Maximum shutter: OFF (1/30 s), Gain: High, when the IR LED is lit) 0.01 lx {0.00093 foot-candle} (F1.3, Maximum shutter: Off (1/30 s), AGC: High) 0.0007 lx {0.00007 foot-candle}...
- Page 42 Super-Dynamic: On (High)/ On (Normal)/ Off * W hen frame rate is set to 60 fps,Off is displayed for Super Dynamic function. Dynamic range: 133 dB typ. (Super Dynamic: On) Face SD (Super-Dynamic): On/ Off (only when Super Dynamic: On) Gain (AGC): On (Low)/ On (Mid)/ On (High)/ Off Adaptive black stretch: On/ Off (only when Super Dynamic: Off) Back light compensation (BLC): On/ Off (only when Super Dynamic: Off) Fog compensation: On/ Off (only when Super Dynamic/ Adaptive black stretch: Off) High light compensation (HLC): On/ Off (only when Super Dynamic/ Back light compensation: Off) Light control mode setting: Outdoor scene/ Indoor scene (50 Hz)/ Indoor scene (60 Hz)/ Fix shutter Shutter speed: [2 mega pixel [16:9] (60 fps mode) SPW631LT SPW631L 1.3 mega pixel [16:9] (60 fps mode) SPW611L SPW611 OFF(1/60), 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 Other than [2 mega pixel [16:9] (60 fps mode) SPW631LT SPW631L 1.3 mega pixel [16:9] (60 fps mode) SPW611 SPW611L OFF(1/30), 3/100, 3/120, 2/100, 2/120, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 Maximum shutter: max. 1/1000 s, max. 1/500 s, max. 1/250 s, max. 1/120 s, max. 2/120 s, max. 1/100 s, max. 2/100 s, max. 1/60 s, max. 1/30 s,...
- Page 43 Digital (electronic) zoom: Choose from 3 levels of x1, x2, x4 Focal length: SPW631LT 9 mm – 22 mm {23/64 inches – 55/64 inches} SPW611L SPW611 SPW631L 2.8 mm – 10 mm {1/8 inches – 13/32 inches} Maximum aperture ratio: SPW631LT 1:1.6 (WIDE) – 1:3.0 (TELE) SPW631L SPW611L SPW611 1:1.3 (WIDE) – 1:3.0 (TELE) Focus range: SPW631LT 1.0 m – ∞ SPW611L SPW611 SPW631L 0.3 m – ∞ Aperture range: SPW631LT F1.6 – F11 SPW631L SPW611L SPW611 F1.3 – F11 Angular field of view: SPW631LT [16:9 mode] Horizontal: 13.8 ° (TELE) – 33.5 ° (WIDE) Vertical: 7.7 ° (TELE) – 18.1 ° (WIDE) [4:3 mode] Horizontal: 11.5 ° (TELE) – 27.4 ° (WIDE) Vertical: 8.6 ° (TELE) – 20.1 ° (WIDE) SPW631L [16:9 mode] Horizontal: 30.9 ° (TELE) – 105.4 ° (WIDE) Vertical: 17.4 ° (TELE) – 57.3 ° (WIDE) [4:3 mode]...
- Page 44 Mass: Approx. 220 g {0.49 lbs} Finish: Aluminum die cast, metallic silver coating <Camera mount bracket dimensional drawing> (unit : mm) 4-6 (W) x 10 (L) • Network Network: 10BASE-T/100BASE-TX, RJ-45 connector Resolution: SPW631LT SPW631L H.264 2 mega pixel [16:9] (30 fps mode)/ 2 mega pixel [16:9] (60 fps mode) JPEG (MJPEG) 1920x1080, 1280x720, 640x360, 320x180, 160x90 2 mega pixel [4:3] (30 fps mode) 1600x1200, 1280x960, 800x600, VGA, 400x300, QVGA, 160x120 3 mega pixel [4:3] (30 fps mode) * Used by super resolution techniques 2048x1536, 1280x960, 800x600, VGA, 400x300, QVGA, 160x120 SPW611L SPW611 1.3 mega pixel [16:9] (30 fps mode)/1.3 mega pixel [16:9] (60 fps mode) 1280x720, 640x360, 320x180, 160x90 1.3 mega pixel [4:3] (30 fps mode) 1280x960, 800x600, VGA, 400x300, QVGA, 160x120...
- Page 45 Image compression method: H.264* Image quality (Constant bit rate/Best effort): Low (Motion priority)/ Normal/ Fine (Image quality priority) (VBR): 0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low Transmission type: Unicast/Multicast Video bit rate: (Constant bit rate/ VBR/ Frame rate/ Best effort/ Advanced VBR) 64 kbps/ 128 kbps*/ 256 kbps*/ 384 kbps*/ 512 kbps*/ 768 kbps*/ 1024 kbps*/ 1536 kbps*/ 2048 kbps*/ 3072 kbps*/ 4096 kbps*/ 6144 kbps*/ 8192 kbps*/ 10240 kbps*/ 12288 kbps*/ 14336 kbps*/ 16384 kbps*/ 20480 kbps*/ 24576 kbps*/ 30720 kbps*/ 40960 kbps* * T he available range of the H.264 bit rate varies depending on the setting selected for “Image capture size”. (Frame rate) 1 fps/ 3 fps/ 5 fps*/ 7.5 fps*/ 10 fps*/ 12 fps*/ 15 fps*/ 20 fps*/ 30 fps*/ 60 fps* * " Frame rate*" is limited to "Max bit rate (per client)". When a value with an asterisk (*) on the right of it is selected, the actual frame rate may be lower that the value selected. JPEG (MJPEG) Image quality: 0 SUPER FINE/ 1 FINE/ 2/ 3/ 4/ 5 NORMAL/ 6/ 7/ 8/ 9 LOW (10 steps: 0-9) Transmission interval: 0.1 fps - 60 fps (JPEG frame rate will be restricted when displaying both JPEG and H.264 images.) Cropping function: • Off/ JPEG(1)/ JPEG(2)/ JPEG(3)/ H.264(1)/ H.264(2)/ H.264(3)/ H.264(4)/ H.264(all) • Alarm action On/ Off Audio compression method: G.726 (ADPCM) 32 kbps/ 16 kbps, G.711 64 kbps, AAC-LC* Bandwidth control: Unlimited/ 64 kbps/ 128 kbps/ 256 kbps/ 384 kbps/ 512 kbps/ 768 kbps/ 1024 kbps/ 2048 kbps/ 4096 kbps/ 8192 kbps Protocol: IPv6: T CP/IP, UDP/IP, HTTP, HTTPS, FTP, SMTP, DNS, NTP, SNMP,...
- Page 46 Multi-screen: Up to 16 camera images can be displayed simultaneously on a multi-screen. (Including the camera itself) Compatible SDXC/SDHC/ Manufactured by Panasonic (SD speed class 4 or higher) SD memory card* SDXC memory card: 64 GB SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB SD memory card: 2 GB (except miniSD card and microSD card) Cellular phone compatibility: JPEG image, AUX control (by access level) Mobile terminal compatibility: iPad, iPhone, iPod touch (iOS 4.2.1 or later) (As of August, 2014)* Android mobile terminals *1 Transmission for 4 streams can be individually set. *2 AAC (Advanced Audio Coding - Low Complexity) is only used when recording audio on an SD memory card. *3 For further information about PC system requirements and precautions for when using Microsoft Windows 8.1, Microsoft Windows 8, Microsoft Windows 7, Microsoft Windows Vista, or Windows Internet Explorer, click “Manual” - “Open” from the supplied CD-ROM and ® ® refer to “Notes on Windows / Internet Explorer versions”. *4 When using an SD memory card supporting Class 10 of the speed class, use a UHS-I (Ultra High Speed-I) compliant card. *5 For further information about compatible devices, refer to our website (http://security.panasonic.com/pss/security/support/info.html).
-
Page 47: Standard Accessories
Standard accessories Installation Guide (this document) ............1 set Warranty card ..................1 set CD-ROM* ..................1 pc. Code label* ..................1 pc. The following parts are used during installation procedures. 4P alarm cable ..................1 pc. 2P power cable .................1 pc. Waterproof tape .................1 pc. Adapter box ..................1 pc. Camera mount bracket ..............1 pc. Mount bracket cover .................2 pcs. Adapter box mounting screw (M4 x 35 mm) ........1 pc. Mounting screws for adapter box/ camera mount bracket (M5 x 20 mm) ......................5 pcs. (of them, 1 for spare) Camera fixing screw (M4 x 10 mm) ............4 pcs. (of them, 1 for spare) Mount bracket cover screw (M3 x 6 mm) ...........3 pcs. (of them, 1 for spare) LAN cable cover ................1 pc. *1 The CD-ROM contains the operating instructions and different kinds of tool software programs. *2 This label may be required for network management. The network administrator shall retain the code label. Optional accessories User License Accessory (For H.264) ...... B B-HCA8A BB-HCA8CE... - Page 48 Panasonic Corporation Panasonic System Communications Company of North America, http://panasonic.net Unit of Panasonic Corporation of North America Panasonic System Networks Co., Ltd. www.panasonic.com/business/ Fukuoka, Japan For customer support, call 1.800.528.6747 Two Riverfront Plaza, Newark, NJ 07102-5490 Authorised Representative in EU: Panasonic Canada Inc.