Internal Usb Memory Key (Optional); Replacing The Internal Usb Key - Dell PowerEdge R430 Owner's Manual
Hide thumbs
Also See for PowerEdge R430:
- Owner's manual (212 pages) ,
- Getting started (2 pages) ,
- Owner's manual (220 pages)
Table of Contents
Advertisement
Next steps
Follow the procedure listed in
Related Links
Removing the cooling shroud
Installing the cooling shroud
Internal USB memory key (optional)
The USB memory key installed inside your system can be used as a boot device, security key, or mass
storage device.
To boot from the USB memory key, configure the USB memory key with a boot image and then specify
the USB memory key in the boot sequence in the System Setup.
NOTE: The internal USB connector is located on the system board.
Related Links
System board connectors
Replacing the internal USB key
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you read the
2.
Follow the procedure listed in
Steps
1.
Locate the USB connector/USB key on the system board.
To locate the USB connector, see
2.
If installed, remove the USB key.
3.
Insert the USB key into the USB connector.
78
After working inside your
Safety
instructions.
Before working inside your system
System board
connectors.
system.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
