Related Manuals for Panasonic KX-TS840MX
Summary of Contents for Panasonic KX-TS840MX
-
Page 1: Operating Instructions
Operating Instructions Integrated Telephone System KX-TS840MX Model No. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. -
Page 2: Table Of Contents
Table of Contents Introduction Accessory information ......3 Important Information For your safety ........4 Important safety instructions ....4 For best performance ......4 Other information ........4 Specifications ........5 Preparation Controls ..........6 Connections ........7 Initial setting ........7 Making/Answering Calls Making calls ........8 Answering calls ........8 Useful features during a call ....9 Dial lock ..........10 One-Touch Dialer... -
Page 3: Accessory Information
Introduction For your future reference We recommend keeping a record of the following information to assist with any repair under warranty. Serial No. Date of purchase (found on the bottom of the unit) Name and address of dealer Attach your purchase receipt here. Accessory information Supplied accessories Accessory item... -
Page 4: Important Information
Important Information 1. Do not use this product near water for example, near a bathtub, washbowl, For your safety kitchen sink, or laundry tub, in a wet basement or near a swimming pool. To prevent severe injury and loss of life/ 2. -
Page 5: Specifications
Important Information Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Specifications R Power source: From telephone line... -
Page 6: Preparation
Preparation Controls A Headset jack (page 16) L MMUTEN (page 9) B M DIAL LOCK/EXITN (page 10, M MSP-PHONEN (Speakerphone) (page 8, 9, 12, 13, 14) 12, 14) MHEADSETN (page 16) C MHOLD/MODEN (page 7, 9, 10, 15) N STATUS indicator (SP-PHONE/Mute/ Hold/Program/Dial lock/Headset) D MREDIALN (page 8) (page 7, 8, 9, 10, 12,... -
Page 7: Connections
To single-line telephone jack DSL/ADSL filter* R Use only a Panasonic handset for KX-TS840MX. R Use only the supplied telephone line cord. Using another telephone line cord may not allow the unit to work properly. *DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service. -
Page 8: Making/Answering Calls
Making/Answering Calls MREDIALN Making calls R Redial will dial the last number you dialed manually. Lift the handset and dial the phone When you finish talking, place the number. handset on the cradle or press When you finish talking, place the MSP-PHONEN. -
Page 9: Useful Features During A Call
Making/Answering Calls Note: To release hold, lift the handset if the handset is on the cradle. R The ringer indicator will flash when – a telephone number is dialed using Press MHOLD/MODEN if the handset another phone which is in PULSE is off the cradle. -
Page 10: Dial Lock
Making/Answering Calls transferring an extension call, or Note: accessing optional telephone services. R Please contact your service provider/ telephone company for details and Flash time availability of this service in your area. The flash time depends on your Temporary tone dialing (for telephone exchange or host PBX. - Page 11 Making/Answering Calls R If you have entered the wrong password, error beep will sound. Repeat from step 2. When finished, hang up. Note: R If dial lock is turned on, pressing the dial button will cause an error beep to sound.
-
Page 12: One-Touch Dialer
One-Touch Dialer or call restriction (page 15) is turned One-touch dialer You can store up to 20 phone numbers Erasing a stored number in the one-touch dial buttons (10 Lift the handset. numbers in UPPER memory locations MPROGRAMN and 10 numbers in LOWER memory R Status indicator light will start locations). - Page 13 One-Touch Dialer R Status indicator light will turn OFF. Index card When finished, hang up. Use the index card to record the names/ phone numbers stored to the one-touch Erasing a stored number dial buttons. Lift the handset. MPROGRAMN R Status indicator light will start double flashing at an interval.
-
Page 14: Speed Dialer
Speed Dialer MAUTO/LOWERN ® Press a Speed dialer memory station number (M0N to M9N) for the phone number to be erased. You can store up to 10 numbers in the R A long beep sounds. memory stations. The dialing buttons R Status indicator light will turn OFF. -
Page 15: Special Programming
5. If you forget your password, consult your Enter the unit password ® nearest Panasonic service center. MPROGRAMN R A beep sounds. Lift the handset. R If you have entered the wrong MPROGRAMN password, error beep will sound. -
Page 16: Useful Information
Useful Information Optional headset Plugging the optional headset into the unit allows a hands-free phone conversation. Please use only a Panasonic KX-TCA94EX. Connecting the optional headset to the unit Connect the optional headset to the headset jack as shown below. -
Page 17: Desk Mount Setup
Useful Information Desk mount setup This unit can be used in 2 positions. Low desk position (default) High desk position – You can adjust the wall mount adaptor to slope this unit. Changing to the high position 1. Press the tab in the direction of the 2. -
Page 18: Wall Mount Setup
Useful Information Wall mount setup The unit can be mounted on a wall by changing the wall mount adaptor’s position. Note: R Make sure that the wall and the fixing method are strong enough to support the weight of the unit. Pull down the handset hook until it locks, so the tabs holds the handset. - Page 19 Useful Information Turn the adaptor. Tuck the telephone line cord inside the wall mount adaptor. Insert the lower tabs of the adaptor into the unit’s bottom slots (A), then insert by pushing down the levers of the adaptor into the upper slots (B). Drive screws (not included) into the wall using the wall template below.
-
Page 20: Troubleshooting
Useful Information Troubleshooting General use Problem Cause/solution The unit does not work. R Check the connections (page 7). The unit does not ring. R The RINGER selector is set to OFF. Set to HIGH or LOW (page 9). R Make sure the unit is not in programming mode. You cannot dial. - Page 21 Useful Information Liquid damage Problem Cause/solution Liquid or other form of R Disconnect the telephone line cord from the unit. moisture has entered the Leave the unit to dry for at least 3 days. After the unit. unit is completely dry, reconnect the telephone line cord.
-
Page 22: Index
Index Index A Accessory information: 3 Answering calls: 8 C Call restriction: 15 Changing the unit password: 15 Connections: 7 Controls: 6 D Desk mount setup: 17 Dial lock: 10 Dialing mode: 7 Flash: 9 Flash time: 10 H Hold: 9 Index card: 13 LOWER memory locations: 12 M Making calls: 8... - Page 23 Notes...
- Page 24 Hong Kong Tel: 2313 0888 Hotline: 2313 0666 Fax: 2368 8068 Email address: shtec@panasonic.oa.hk Panasonic System Networks Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Web Site: http://www.panasonic.net/ © Panasonic System Networks Malaysia Sdn. Bhd. 2012 *TS840MX* *TS840MX* PNQX5617ZA PSNM0712NE0...