Page 1
VIDEO PROJECTOR VPL-VW95ES PROTOCOL MANUAL 1st Edition...
Page 2
électrique, d’incendie ou de blessure n’effectuer que les réparations indiquées dans le mode d’emploi à moins d’être qualifi é pour en effectuer d’autres. Pour toute réparation faire appel à une personne compétente uniquement. VPL-VW95ES...
Packet format for sending/receiving “Sub Command”. Refer to the section 3-6-1 for detail description. (1) RS-232C Sub Command Simplified Command Asynchronous RS-232C Fig. 1-1 RS-232C Protocol Stack “RS-232C” layer is physical layer and “Asynchronous” is the traditional protocol layer as shown in the section 3-2. 1 (E) VPL-VW95ES...
0000h to 0064h (0 to 100) Color Temp. High 0000h 0001h Low1 0002h Custom1 0003h Custom2 0004h Custom3 0005h Custom4 0006h Low2 0007h Custom5 0008h Lamp Control 0000h High 0001h Black Level Adj. Set Value FFFDh to 0003h (_3 to 3) 2 (E) VPL-VW95ES...
Page 7
Block NR 0000h 0001h Middle 0002h High 0003h Mosquito NR 0000h 0001h Middle 0002h High 0003h White Level Adj. Set Value FFFDh to 0003h (_3 to 3) Color Space Normal 0000h Wide1 0001h Wide2 0002h Wide3 0003h 3 (E) VPL-VW95ES...
Page 8
Data Item Upper byte Lower byte Data Byte Wide Mode Full 0000h Set/Get Normal 0001h Wide Zoom 0002h Zoom 0003h Full1 0007h Full2 0008h Anamorphic 000Bh Zoom Over Scan 0000h 0001h Screen Area Full 0000h Through 0001h 4 (E) VPL-VW95ES...
Page 9
Simulated 3D 0000h Side-by-Side 0001h Over-Under 0002h 3D Depth Adjust Set Value FFFEh to 0002h (_2 to 2) Simulated 3D High 0000h Effect Middle 0001h 0002h 3D Glasses Set Value 0000h to 0004h (0 to 4) Brightness 5 (E) VPL-VW95ES...
Page 10
*1: By using this Item Number, it is possible to simulate the infrared remote controller. Choose your desired Code from the table in the section 2-1-2 and use it as the Lower byte of Item Number. Depending on the category, different value (Upper byte) is assigned. 6 (E) VPL-VW95ES...
Page 12
INPUT A COMPONENT POWER ON POWER OFF CURSOR → CURSOR ← CURSOR ↑ CURSOR ↓ INPUT SELECT ENTER HDMI 1 HDMI 2 RESET *1: Send the command twice when this unit is in standby mode (Low) state. 8 (E) VPL-VW95ES...
Page 13
3D GLASSES BRIGHTNESS_ 2D-3D DISPLAY SEL. AUTO 2D-3D DISPLAY SEL. 3D 2D-3D DISPLAY SEL. 2D 3D FORMAT OVER-UNDER 3D FORMAT SIDE-BY-SIDE 3D FORMAT SIMULATED 3D SIMULATED 3D EFFECT HIGH SIMULATED 3D EFFECT MIDDLE SIMULATED 3D EFFECT LOW 9 (E) VPL-VW95ES...
Other Comm Error Error description Check Sum Error A check sum error occurred. Framing Error A framing error occurred. Parity Error A parity error occurred. Over Run Error An overrun error occurred. Other Comm Error Other error occurred. 10 (E) VPL-VW95ES...
PARITY STOP (LSB) (MSB) (EVEN) EVEN Parity ....Total number of “1”s from D0 to D7 is an even number. 8 0 ....Total number of “1”s from D0 to D7 is an odd number. 8 1 11 (E) VPL-VW95ES...
(Do not return the return data (ACK, NAK) when the SIRCS direct command is received.) 3-5. Approximate Return Waiting Times The await-return time is approx. 30 to 3200 msec. This is the case, unless the communications are interfered anyway. 12 (E) VPL-VW95ES...
CHECK SUM = 7Fh END CODE = 9Ah 3-8. AMX Device Discovery This model is equipped with the protocol that conforms to the Device Discovery stipulated by AMX. Con- tact AMX for details about the Device Discovery. 14 (E) VPL-VW95ES...
Page 19
The material contained in this manual consists of information that is the property of Sony Corporation. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual without the express written permission of Sony Corporation.