hit counter script
Sony VPL-VW285ES Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Projector
  5. VPL-VW285ES
  6. Operating instructions manual

Sony VPL-VW285ES Operating Instructions Manual

Hide thumbs Also See for VPL-VW285ES:
Table of Contents

Advertisement

Quick Links

4-725-444-01 (1)
Video Projector
Operating Instructions
Before operating the unit, please read this manual and supplied Quick
Reference Manual thoroughly and retain them for future reference.
VPL-VW285ES

Advertisement

Table of Contents
loading

Related Manuals for Sony VPL-VW285ES

Summary of Contents for Sony VPL-VW285ES

  • Page 1 4-725-444-01 (1) Video Projector Operating Instructions Before operating the unit, please read this manual and supplied Quick Reference Manual thoroughly and retain them for future reference. VPL-VW285ES...

  • Page 2: Table Of Contents

    Table of Contents Location of Controls Using Network Features Front/Right Side ........ 3 Displaying the Control Window of the Unit with a Web Browser ..... 38 Rear/Left Side/Bottom ...... 4 Operating the Control Window ..39 Remote Control ......... 5 Switching the Page .....39 Setting the Access Limitation ..39 Connections and...

  • Page 3: Location Of Controls

    Location of Controls Front/Right Side Warning indicators Warning indicators Others a ON/STANDBY indicator i Lamp cover (page 47) (page 44) j Ventilation holes (exhaust) b WARNING indicator (page 44) k Ventilation holes (intake) (page 49) Connectors l Remote control detector c LAN connector (page 38) (page 7) d USB connector (page 46)

  • Page 4: Rear/Left Side/Bottom

    Rear/Left Side/Bottom The buttons on the control panel have the same names as those on the remote control. Control panel Control panel Others a ?/1 (ON/STANDBY) button f Remote control detector (page 7) (page 7) b INPUT button (page 13) g Ventilation holes (intake) (page 49) c MENU button (page 20)

  • Page 5: Remote Control

    a LIGHT button Remote Control Illuminates the buttons on the remote control. b Infrared transmitter c ?/1 (ON/STANDBY) button (page 7) d INPUT button (page 13) e CALIBRATED PRESET buttons (page 19) f PATTERN button (page 8) g RESET button (page 21) h M/m/</, (arrow)/ (enter) buttons (page 20)

  • Page 6: Connections And Preparations

    Connections and Preparations Note Installing the Unit When using a screen with an uneven surface, stripes pattern may rarely appear on the screen The installation distance between the unit depending on the distance between the screen and a screen varies depending on the size of and the unit or the zooming magnifications.

  • Page 7: Adjusting The Picture Position

    Note Adjusting the Picture Depending on the installation location of the Position unit, you may not be able to control it with the remote control. In this case, point the remote control at the remote control detector of the Project an image on the screen and then unit or the screen.
  • Page 8 Adjust the focus. Adjust the picture size. Press the PATTERN button repeatedly to Press the PATTERN button repeatedly to display the Lens Focus adjustment display the Lens Zoom adjustment window (test pattern). Then adjust the window (test pattern). Then adjust the focus of the picture by pressing the M/m/ size of the picture by pressing the M/m/ </, buttons.
  • Page 9 To adjust the horizontal position To adjust the vertical position Press </,. Press M/m. The picture projected on the screen moves The picture projected on the screen moves right or left by a maximum of 31% of the up by a maximum of 85% or moves down by screen width from the center of the lens.
  • Page 10 Range of movement of the projected Lens adjustment window (test picture pattern) 1.78:1 (16:9) 0.85V 1.33:1 (4:3) 0.31H 0.31H Projected Picture 2.35:1 0.8V H: Width of the projected picture V: Height of the projected picture 1.85:1 The dashed lines show the screen sizes of each aspect ratio.

  • Page 11: Connecting To Video Equipment Or A Computer

    Connecting to Video Equipment or a Computer You can enjoy high picture quality by connecting a DVD player/recorder, Blu-ray Disc player/ ® recorder, or PlayStation equipped with HDMI output to the HDMI input of the unit. When making connections, be sure to do the following: •...
  • Page 12 Notes • Use a High Speed HDMI cable or a Premium High Speed HDMI cable. With a standard HDMI cable, images of 1080p, DeepColor, 3D video and 4K video may not be displayed properly. • When connecting an HDMI cable to the unit, make sure the mark on the upper part of the HDMI input of the unit and the v mark on the connector of the cable is set at the same position.

  • Page 13: Projecting

    Projecting The fan stops and the ON/STANDBY Projecting the indicator changes from flashing green to remaining red. Picture The power is turned off completely, and you can disconnect the AC power cord. Turn on both the unit and the equipment connected to the unit. Note Never disconnect the AC power cord while the Press INPUT to display the input...

  • Page 14: Watching 3D Video Images

    Adjusting/Setting the 3D functions Watching 3D Video You can adjust/set the 3D functions by Images pressing the 3D button on the remote control or with the “3D Settings” of the Function menu. For details, see “3D Settings” You can enjoy powerful 3D video images, (page 31).
  • Page 15 Top or side view Projector 10 m 10 m 10 m 10 m...

  • Page 16: Selecting The Aspect Ratio According To The Video Signal

    Selecting the Aspect Ratio According to the Video Signal You can select an aspect ratio best suited for the video signal received. Press ASPECT. ASPECT Each time you press the button, you can button select the “Aspect” setting.You can also select it using the menu (page 28).
  • Page 17 Original image Recommended setting and resultant images Normal 1.78:1 (16:9) 1.33:1 (4:3) 1.33:1 (4:3) with side panels V Stretch 2.35:1 When using an anamorphic lens Squeeze 16:9 When using an anamorphic lens...
  • Page 18 Original image Recommended setting and resultant images Stretch Squeezed Notes • Selectable aspect modes vary depending on the input signal (page 57). • The aspect cannot be selected for an input signal from a computer, or an input signal with a resolution of 4096 × 2160 (page 52). Notes on switching the “Aspect”...

  • Page 19: Selecting The Picture Viewing Mode

    Selecting the Picture Viewing Mode You can select the picture viewing mode that best suits the type of video source or room conditions. You can save and use different preset modes for 2D/3D respectively. CALIBRATED Press one of the CALIBRATED PRESET PRESET buttons buttons.

  • Page 20: Using The Menus

    Using the Menus Note The menu displays used for the explanation may be different from the actual menu display. Press M/m to select an item you want Operation through to set or adjust and press , or The setting items are displayed in a pop- the Menus up menu, in a setting menu, in an adjustment menu or in the next menu...
  • Page 21 Next menu window To reset the items that have been adjusted Setting items Select an item in the menu screen, and display the pop-up menu, the setting menu, or the adjustment menu. Press RESET on the remote control to reset only the selected settings to its factory preset value.

  • Page 22: Picture Menu

    Picture Menu The Picture menu is used for adjusting the picture. Note These items may not be adjustable or configurable, depending on the type of input signal. For details, see “Input Signals and Adjustable/Setting Items” (page 54). Item names in brackets represent those printed on the remote control. Setting items Description Calib.
  • Page 23 Database: Select “Normal” or “Mastered in 4K.” “Mastered in 4K” provides image quality suitable for Blu-ray Disc™ “Mastered in 4K” releasing from Sony Pictures Home Entertainment. Resolution: When you increase the setting value, the texture and detail of the picture become sharper.
  • Page 24 Setting items Description Brightness Adjusts the brightness of the picture. [BRIGHTNESS] The higher the setting, the brighter the picture. The lower the setting, the darker the picture. You can make adjustments by pressing the BRIGHTNESS +/- on the remote control. Color Adjusts the color density.
  • Page 25 Setting items Description MPEG NR Reduces block noise and mosquito noise, in particular in digital signals. (MPEG Noise Auto: Detects the noise level to reduce the block noise and mosquito Reduction) noise of the picture automatically. High/Middle/Low: Select a setting according to the block noise and mosquito noise of the input signal source.
  • Page 26 Setting items Description x.v.Color Set this item when connecting the unit with equipment that supports x.v.Color and playing back an x.v.Color video signal. On: You can play back an x.v.Color video signal. Off: The “x.v.Color” function is not applied. Setting x.v.Color to “On” disables gamma adjustment. Sets how to play back HDR content.

  • Page 27: Screen Menu

    Screen Menu You can set the picture size, aspect mode, etc. Note These items may not be available, depending on the type of input signal. For details, see “Input Signals and Adjustable/Setting Items” (page 54). Item names in brackets represent those printed on the remote control. Setting items Description Aspect...
  • Page 28 Setting items Description Tips • When you select “V Stretch” or “Squeeze,” select the anamorphic lens type from “Anamorphic Lens” in the Installation menu. • Selectable aspect modes vary depending on the input signal (page 57). • The aspect cannot be selected for an input signal from a computer, or an input signal with a resolution of 4096 ×...

  • Page 29: Setup Menu

    • To turn on the power with the Remote Start function, a special command should be sent from a PC or a terminal. For details, consult with qualified Sony personnel. Note When Remote Start is set to “On,” the standby power requirement will increase.
  • Page 30 Setting items Description Network Management On: Set when connected to the network and continuously communicating with the projector control equipment. Note When Network Management is set to “On,” the network function is continuously enabled. Set Network Management to “Off” for normal use.

  • Page 31: Function Menu

    Function Menu The Function menu is used for changing the settings of the various functions of the unit. Setting items Description 3D Settings You can change the settings of the 3D function. 2D-3D Display For Switching the video images to “2D” or “3D.” Sel.
  • Page 32 Setting items Description 3D Depth Adjust For adjusting the depth of the 3D video images on the screen. The setting can be made only when a 3D Format other than “Simulated 3D” is selected. Depth Front Normal Depth We recommend that “3D Depth Adjust” be set to “0.” The 3D video images may be difficult to perceive, depending on the setting of “3D Depth Adjust.”...

  • Page 33: Items Locked By Settings Lock

    Items Locked by Settings Lock Group 1 Group 2 Picture menu Setup menu Reset Status Reality Creation Language Contrast Enhancer Menu Position Lamp Control High Altitude Mode Motionflow Remote Start Contrast Network Management Brightness Power Saving Color Lamp Setting Function menu Color Temp.

  • Page 34: Installation Menu

    Installation Menu The Installation menu is used for changing the installation settings. Setting items Description Image Flip Flips the picture on the screen horizontally and/or vertically. HV: Flips the picture horizontally and vertically. H: Flips the picture horizontally. V: Flips the picture vertically. Off: The picture does not flip.
  • Page 35 Setting items Description Panel Alignment This feature allows you to adjust the gaps in the color of characters or the picture on the screen. Adjust: Adjusts the gaps in the colors selecting “Adjust Color” or “Adjust Item.” Adjust Item: Selects how to make adjustments from below. Shift: Shifts the whole picture and makes adjustments.
  • Page 36 Setting items Description Network Setting Perform internet protocol settings. IPv4 Setting IP Address Setup: Selects the IP address setting method. Auto (DHCP): The IP address is assigned automatically from the DHCP server such as a router. Manual: Specifies the IP address manually. When “Manual”...

  • Page 37: Information Menu

    Information Menu The Information menu displays the model name, serial number, input signal type/format, software version and the cumulated hours of usage of the lamp. Signal type Items Description Model Name Displays the model name Serial No. Displays the serial number. Signal type Displays the resolution of the input signal which you are selecting.

  • Page 38: Using Network Features

    Using Network Features Connection to the network allows you to Displaying the operate the following features: • Checking the current status of the unit Control Window of via a Web browser. the Unit with a Web • Making the network settings for the unit.

  • Page 39: Operating The Control Window

    Operating the Control Window Switching the Page Click one of the Page Switching buttons to display the desired setting page. Once you make the network settings, you can open the Control window only by performing step 3 of this procedure. Page Switching buttons Setting the Access Limitation You can limit a user for accessing any...

  • Page 40: Confirming The Information Regarding The Unit

    The default password “Projector” cannot be set as a new password. Note If you forget your password, consult with qualified Sony personnel. Confirming the Information Regarding the Unit You can confirm the current settings for the unit on the Information page.

  • Page 41: Error Handling

    Error Handling Troubleshooting If the unit appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel. Power Symptom Cause and Remedy Page The power is not turned The power may not turn on if you turn the power off with ?/ –...
  • Page 42 The model name does not The display mode of the unit may be set at the time of – disappear from the purchase. Consult with your local dealer or qualified Sony screen. personnel. Remote control Symptom Cause and Remedy...
  • Page 43 Others Symptom Cause and Remedy Page The fan is noisy. Check the setting of “High Altitude Mode” on the Setup menu. Make sure that the room temperature is not too high. – Check the installation requirements of the unit. – Fan speed increases to maintain the product reliability of the projector’s components in a room, where the temperature is higher than normal.

  • Page 44: Warning Indicators

    The fan is broken. Consult with qualified Sony personnel. (Flashes in red) (Flashes in red) Both indicators flash Note When a warning indicator other than the above starts flashing, and the symptom persists even after carrying out the above methods, consult with qualified Sony personnel.

  • Page 45: Message Lists

    Message Lists Warning messages Symptom Cause and Remedy Page High temp.! Lamp off in Turn off the power. – 1 min. Check to ensure that nothing is blocking the ventilation 3, 4 holes. Frequency is out of Frequency is out of range. Input a signal that is within the range! acceptable frequency range of the unit.

  • Page 46: Others

    3D video images by converting Download the update files from the to the simulated 3D may constitute an following Sony website: infringement of the rights of authors or https://esupport.sony.com/ producers, which are legally protected. The website also explains how to install the update.

  • Page 47: Replacing The Lamp

    • Be sure to turn off the unit and unplug the Replacing the Lamp power cord before replacing the lamp, then check the ON/STANDBY indicator has already been turned off. The lamp used for the light source has a certain lifespan. When the lamp dims, the Turn off the unit and unplug the AC color balance of the picture becomes power cord.
  • Page 48 Push in the new lamp by the handle securely until it reaches the end, and then tighten the 3 screws. Loosen the 3 screws on the lamp with the Phillips screwdriver. Hold up the handle, then pull the lamp straight out. Note Be careful not to touch the optical block inside the unit.
  • Page 49 Wipe dust off the ventilation holes • The unit will not turn on unless the lamp cover are securely closed. (intake) with a soft cloth. • To clear a message displayed on the screen, press any button either on the remote control or the control panel of the unit once.

  • Page 50: Cleaning

    For additional information, • Clean the unit with a cleaning cloth. see www.sony.com/ Wiping with a dirty cloth may scratch the unit. mercury • Using such materials or maintaining...

  • Page 51: Specifications

    Specifications Item Description Display system SXRD panel, projection system Display device Size of effective 0.74-inch (18.8 mm) SXRD display area Number of pixels 26,542,080 pixels (8,847,360 pixels × 3) Projection lens 2.06 times zoom lens (motorized) f = 21.7 mm to 44.7 mm F3.0 to F4.0 Light source Ultra High Pressure Lamp 225 W type...

  • Page 52: Preset Signals

    • The values for mass and dimensions are approximate. • Not all optional accessories are available in all countries and area. Please check with your local Sony Authorized Dealer. • Information on accessories in this manual is current as of September 2016.
  • Page 53 Preset Preset signal (resolution) fH (kHz) fV (Hz) Sync memory no. 1920 × 1080/50i 1080/50i 56.250 50.000 – (Frame packing) (1920 × 1080i) 3840 × 2160/60p 3840×2160/60p 135.000 60.000 – (3840 × 2160) 3840 × 2160/50p 3840 × 2160/50p 112.500 50.000 –...

  • Page 54: Input Signals And Adjustable/Setting Items

    Input Signals and Adjustable/Setting Items The items in the menus available to adjust differ depending on the input signal. The following tables indicate them. The items that cannot be adjusted/set are not displayed in the menu. Picture menu Input signal Item Component signal Video GBR signal...

  • Page 55: Compatible 3D Signals

    Screen menu Input signal Item Component signal Video GBR signal Computer signal Aspect* (excluding preset (excluding preset – memory numbers 76 memory numbers 78, to 79 and 96) 79 and 96) : Adjustable/can be set –: Not adjustable/cannot be set *1: For further details, refer to the tables in “Aspect Mode”...
  • Page 56 3D signals Item 720/60p, 1080/60i, 1080/24p 1080/60p, 720/50p 1080/50i 1080/50p Film Mode – – – x.v.Color – – – – Aspect* : Adjustable/can be set –: Not adjustable/cannot be set *1: The item is not available for Frame Packing/Over-Under on 720/60p, or Over-Under on 1080/ 60p.

  • Page 57: Aspect Mode

    Aspect Mode Selectable items vary depending on the type of input signal or 3D format. For details, see the tables below. Items that cannot be selected are not displayed in the menu. 1920 × 1080 720 × 480 Acceptable signals 4096 ×...

  • Page 58: Motionflow

    Motionflow Selectable items vary depending on the type of input signal or 3D format. For details, see the tables below. Items that cannot be selected are not displayed in the menu. 1920 × 1080 1280 × 720 3840 × 2160 Acceptable signals Others 720 ×...
  • Page 59 Picture menu Item Storage conditions Calib. Preset For each input connector Reset For each input connector and Calib. Preset Reality Creation Contrast Enhancer Lamp Control Motionflow Contrast Brightness Color Color Temp. D93-D55 Custom 1-5 Gain R For each Color Temp., D93-D55 and Custom 1-5 Gain G Gain B Bias R...

  • Page 60: Projection Distance And Lens Shift Range

    Projection Distance and Lens Shift Range The projection distance refers to the distance between the front of the lens and the projected surface. Projection distance L Front of the lens Projected image The lens shift range represents the distance in percent (%) by which the lens can be shifted from the center of the projected image.
  • Page 61 When projecting in 1.90:1 (Native Full Display 17:9) format 1.90 Projection distance Unit: m (inches) Projection image size Projection distance L Diagonal Width × Height 80" (2.03 m) 1.80 × 0.95 (71 × 37) 2.32 – 4.77 (91 – 187) 100"...
  • Page 62 When projecting in 1.78:1 (16:9) format 1.78 Video display area Projection area Projection distance Unit: m (inches) Projection image size Projection distance L Diagonal Width × Height 80" (2.03 m) 1.77 × 1.00 (70 × 39) 2.44 – 5.01 (96 – 197) 100"...
  • Page 63 When projecting in 2.35:1 format 2.35 Video display area Projection area Projection distance Unit: m (inches) Projection image size Projection distance L Diagonal Width × Height 80" (2.03 m) 1.87 × 0.80 (74 × 31) 2.41 – 4.96 (95 – 195) 100"...

  • Page 64: Dimensions

    Dimensions Front Unit: mm (inches) 495.6 (19 247.8 (9 247.8 (9 Center of the lens Bottom Unit: mm (inches) Front of the cabinet 87.3 (3 142.8 (5 150.6 (5 408.9 (16 7.5 ( 463.6 (18...
  • Page 65 The distance between the front of the lens and the front of the cabinet Unit: mm (inches) 36.8 (1 Front of the lens Front of the cabinet Attaching the PSS-H10 projector suspension support Front view Unit: mm (inches) 150 (5 Ceiling Center of the The bottom...
  • Page 66 Side view Unit: mm (inches) 213.5 (8 130 (5 Front of the cabinet 258.5 (10 463.6 (18 Top view Unit: mm (inches) 213.4 (8 130 (5 Front of the cabinet Upper ceiling mount bracket 258.5 (10 Center of the supporting pole (The center of the supporting pole is different from that of the unit.)
  • Page 67 Holes for the ceiling mount Use the screws with a length of 5.3 mm ( inches, minimum) to 7.6 mm ( inches, maximum) for the ceiling mount. Recommended tightening torque (tension when turning a screw towards the direction of rotation): 1.4 ± 0.2 N-m The minimum length of screw Insert nut (M5)

  • Page 68: Index

    Connecting to Video equipment or a Index computer .......... 11 Connectors ..........3 Contrast ........... 23 Numerics Contrast Enhancer ........23 Control panel ..........4 3D glasses 3D glasses communication range ..14 Using the 3D glasses ......14 3D Settings Dimensions ..........
  • Page 69 Trademark Information Projecting the Picture ......13 • “PlayStation” is a registered trademark Projection distance ...... 61, 62, 63 of Sony Computer Entertainment Inc. Projection distance and lens shift • The terms HDMI and HDMI High- range ..........60 Definition Multimedia Interface, and the...
  • Page 70 © 2017 Sony Corporation...
  • Page 71 4-725-447-01 (1) Video Projector Quick Reference Manual ____________ Guide de référence rapide __________ VPL-VW675ES VPL-VW385ES VPL-VW285ES...
  • Page 72 About the Quick Reference Manual This Quick Reference Manual explains the installation and basic operations for projecting pictures. It also describes important notes and cautions to which you have to pay attention when handling and using this unit. Refer to “Warning Indicators” and “Replacing the Lamp,” as necessary. For details on the operations, refer to the Operating Instructions contained in the supplied CD- ROM.
  • Page 73 Before operating the unit, please read this CAUTION manual thoroughly and retain it for future Danger of explosion if battery is incorrectly reference. replaced. Replace only with the same or equivalent type recommended by the manufacturer. When you dispose of the battery, you must WARNING obey the law in the relative area or country.
  • Page 74 If you have any questions about this product, For the customers in Canada you may call; CAN ICES-3 (B)/NMB-3(B) Sony Customer Information Service Center 1-800-222-7669 or http://www.sony.com/ Caution on replacement/disposal of the battery for the 3D glasses Declaration of Conformity...
  • Page 75 SONY LIMITED WARRANTY - Please visit http://www.sony.com/psa/warranty for important information and complete On safety terms and conditions of Sony’s limited • Check that the operating voltage of your warranty applicable to this product. unit is identical with the voltage of your For the customers in Canada local power supply.
  • Page 76 If condensation occurs, leave the projector turned on for about two hours before use. Notes on security • SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND RESULTING FROM A FAILURE TO IMPLEMENT PROPER SECURITY...
  • Page 77 Hot and humid Notes on Installation and Usage Unsuitable installation Do not place the unit in the following situations, which may cause malfunction or damage to the unit. Locations subject to direct cool or Near walls warm air from an air-conditioner To maintain the performance and reliability Installing the unit in such a location may of the unit, leave space between walls and...
  • Page 78 15° or more installer. For dealers • When the projector is mounted on the ceiling, a Sony bracket or recommended equivalent must be used for installation. 15° or • Be sure to secure the cabinet cover firmly more when installing to the ceiling firmly.

  • Page 79: Step 1 Preparing

    Note Inserting the Batteries into If you have lost or damaged the CD-ROM, you the Remote Control can purchase a new one from your Sony dealer or Sony service counter. Push and slide to open. Insert the batteries E side first.

  • Page 80: Step 2

    Step 2 Installing the Unit Position the unit so that the lens is Front of the unit parallel to the screen. After connecting the AC power cord to Flashes in green for the unit, plug the AC power cord into tens of seconds and a wall outlet.
  • Page 81 VPL-VW285ES Lens adjustment window (test pattern) 1.78:1 (16:9) 1.33:1 (4:3) 2.35:1 a Adjust the focus. Press the PATTERN button repeatedly to display the Lens Focus adjustment window (test pattern). Then adjust the focus of the picture by pressing the M/m/ </, buttons.

  • Page 82: Connecting The Unit

    Step 3 Connecting the Unit When making connections, be sure to do the following: • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor picture quality.

  • Page 83: Selecting The Menu Language

    Step 4 Selecting the Menu Language You can select the language for displaying the menu and other on-screen displays. The factory default setting is English. To change the current menu language, set the desired language with the menu screen. Press MENU. Press M/m/</, to select a language, and press The menu appears.
  • Page 84 Step 5 Projecting Note Projecting the Picture Never disconnect the AC power cord while the indicator is flashing. Turn on both the unit and the equipment connected to the unit. You can turn off the unit by holding the ?/1 Press INPUT to display the input (ON/STANDBY) button for about 1 second, palette on the screen.
  • Page 85 Selecting the Picture Viewing Mode Press one of the CALIBRATED PRESET buttons. CALIBRATED PRESET buttons Setting items Description CINEMA FILM 1 Picture quality suited to reproducing the highly dynamic and clear images typical of master positive film. CINEMA FILM 2 Picture quality suited to reproducing the rich tone and color typical of a movie theater, based on the Cinema Film 1.

  • Page 86: Warning Indicators

    Note When a warning indicator other than the above starts flashing, and the symptom persists even after carrying out the above methods, consult with qualified Sony personnel. If there is any problem or an error message appears on the screen, refer to “Error Handling” in the Operating...

  • Page 87: Replacing The Lamp

    Maintenance The lamp used for the light source has a the specified projector lamp, the unit may certain lifespan. When the lamp dims, the malfunction. color balance of the picture becomes • Be sure to turn off the unit and unplug the strange, or “Please replace the Lamp.”...
  • Page 88 Push in the new lamp by the handle securely until it reaches the end, and then tighten the 3 screws. Note Be careful not to touch the optical block inside the unit. Close the lamp door (inner cover), and then tighten the screw. Loosen the 3 screws on the lamp with the Phillips screwdriver.
  • Page 89 For additional information, Notes • The unit will not turn on unless the lamp is see www.sony.com/ securely installed in place. mercury...
  • Page 90 © 2017 Sony Corporation Printed in China...
  • Page 91 VPL-VW285ES 4K HDR Home Theater Projector Enjoy up to 200 inches in True 4K HDR in any room. With more than four times the resolution of Full HD, 4K delivers a picture that’s so incredibly lifelike, it’s like being in the scene or at the game. Experience the latest HDR content with an extremely wide range of contrast and a greater volume of colors.
  • Page 92 Support for latest standards. The VPL-VW285ES can project content at up to 60 frames per second (fps) in 4K for even smoother images with superior color and realism. Both HDMI inputs support HDCP 2.2 so you can enjoy more of the latest 4K content services.
  • Page 93 Specification Light output 2D [lm] 1,500 lm Display device Display device SXRD 0.74" x3 Effective picture elements 26,542,080 pixels Resolution 4096x2160 Drive [Hz] System Digital Projection lens Projection lens Powered Zoom Zoom ratio: x 2,1 Wide:1,38 Throw ratio Tele: 2,83 V: Powered Max.
  • Page 94 3. 3D glasses (TDG-BT500A) are optional; requires 3D content, a 3D player, and an HDMI cable (at least 10.2 Gbps). 4. Requires HDMI® cable sold sep. © 2017 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Features and specifications are subject to change without notice. All screen images simulated.
  • Page 95 VPL-VW675ES/VW385ES/VW285ES Home Theater Projector Look for The Angry Birds Movie on 4K Ultra HD VPL-VW675ES/385ES VPL-VW285ES...
  • Page 96 Seeing is believing Experience the beauty of true 4K Bring incredible 4K detail to your favorite movies Imagine bringing the truly cinematic quality of 4K into your own home. Now you can make this a reality with our VPL-VW675ES/VW385ES/VW285ES series of Home Theater projectors. They produce true 4K resolution images with our native 4K (4096 x 2160) SXRD panels –...
  • Page 97 Native 4K SXRD panel The advanced SXRD (Silicon X-tal Reflective Display) panel technology featured in Sony’s digital cinema projectors delivers native 4K (4096 x 2160) resolution images, with more than four times the detail of Full HD. Fine details are wonderfully clear and natural, without jagged edges or visible pixels.
  • Page 98 Bright Feel Sony’s SXRD panels can achieve the highest contrast ratio compared to other devices. As a result of the high contrast, it gives you the feel of high brightness, and thus more immersiveness. Standard Home Theater Projector Sony Home Theater Projector...
  • Page 99 TRILUMINOS Display Discover true-to-life colors and tones. The projector incorporates TRILUMINOS color, reproducing more tones and textures than a standard projector system. Hard-to-reproduce crimson reds, aqua blues, and emerald greens are displayed beautifully, so landscapes and seascapes look more vivid. Faces look better, too, with skin tones more faithfully reproduced.
  • Page 100 Installation Advantages User-friendly Functions Compact and Functional Design Built-in Auto Calibration Achieving such compact size, provides great flexibility After extended periods, color can be automatically for a variety of installation situations. calibrated to the original factory condition. There’s no need for extra calibration equipment or cameras; a built-in color sensor stores all the necessary Wider Zoom and Shift Lens information.
  • Page 101 Projection distance Optional Accessories 1.78 Video display area Projection area LMP-H280 for TDG-BT500A VPL-VW675ES 3D Glasses 1.78:1 (16:9) Projector Lamp (for replacement) Projection image size Projection distance L Diagonal Width × Height 80” (2.03 m) 1.77 × 1.00 (70 × 39) 2.44 –...
  • Page 102 The values for weight and dimension are approximate. “SONY” is a registered trademark of Sony Corporation. ”3D World”, ”TRILUMINOS” and “SXRD” are trademarks of Sony Corporation. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Table of Contents