Table of Contents
Advertisement
Useful Information
Troubleshooting
Problem
The unit does not work.
The unit does not ring.
You cannot dial.
The other party
suddenly cannot hear
your voice during a
conversation.
You cannot program
items such as the
dialling mode.
You cannot store a
name and phone
number in memory.
While programming or
searching, the unit
starts to ring and stops
the program/search.
56
Check the settings (p. 9
•
Unplug the AC adaptor to reset. Plug in, and try again.
•
The ringer volume is set to OFF and "
•
Select the ringer volume to HIGH, MIDDLE or LOW by
pressing
HOLD/RINGER
{
Check that the dialling mode selection is correct
•
(p. 14).
Dial lock mode is set. To cancel the mode,
•
see page 42.
The dialled number is restricted. To cancel,
•
see page 43.
MUTE
may have been pressed during the
• {
}
conversation. If "
Programming is not possible when the handset is off
•
the cradle, the SP-PHONE/HEADSET indicator lights,
or when viewing caller information.
Do not pause for over 60 seconds while programming.
•
Programming is not possible when the handset is off
•
the cradle or the SP-PHONE/HEADSET indicator
lights.
Check the AC adaptor is connected to the unit
•
Do not pause for over 60 seconds while storing.
•
Do not enter a phone number more than 32 digits long.
•
When using the Dial Lock (p. 42) or Call Restriction
•
feature (p. 43), you cannot store a phone number in
the Direct Dial memory (
emergency numbers (#).
If "Phonebook full" is displayed, erase other stored
•
items from the Phonebook memory (p. 35).
To answer the call, lift the handset or press
•
SP-PHONE/HEADSET
{
beginning after hanging up.
Cause and Remedy
15).
–
(p. 15).
}
" is displayed, press
M1
,
M2
{
}
{
. Start again from the
}
~
" is displayed.
MUTE
.
{
}
.
or
M3
) and
}
{
}
Hide quick links:
Advertisement
Table of Contents
