E or by the Earth symbol Orange). A replacement fuse cover can be or coloured GREEN or GREEN-AND-YELLOW. purchased from your local Panasonic Dealer. The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the HOW TO REPLACE THE FUSE letter N or coloured BLACK.
Maintenance of Your Oven 1. WHEN YOUR OVEN REQUIRES A SERVICE call 2. Do not attempt to tamper with or make any your local Panasonic engineer (0541-591590) for adjustments or repairs to the door, control panel Customer support. It is dangerous for anyone...
Important Information –– Read Carefully Short Cooking Times 5. Foods with Skins As microwave cooking times are much shorter than Potatoes, apples, egg other cooking methods it is essential that yolk, whole vegetables recommended cooking times are not exceeded and sausages are without first checking the food.
Important Information –– Read Carefully 11. Reheating 14. Babies Bottles and Food Jars It is essential that When reheating babies reheated food is served bottles always remove top “piping hot”. Remove the and teat. Liquid at the top of food from the oven and the bottle will be much check that it is “piping hotter than at the bottom...
How Does the Microwave Work? Microwaves are a form of high frequency radio Absorption waves similar to those used by a radio including During heating, microwaves will be absorbed by AM, FM and CB. They are, however, much shorter food. They penetrate to a depth of about 1- 5 cm than radio waves;...
Outline Diagram NE-1027 (1) Timer Select Dial (2) Power Select Dial (3) Start Button (Min) (4) Control Panel (5) Door Safety Lock System (6) Oven Window (7) Oven Lamp ( ( Min Min) ) How to Operate Heating • Turn the Timer Select Dial to the desired position.
Outline Diagram NE-1037 (1) Digital Display Window (see below) (2) Power Level Pad (3) Program Pad (4) Double Quantity (x2) Pad (5) Start Pad (6) Stop/Reset Pad (7) Memory Pads (8) Control Panel (9) Door Safety Lock System (10) Oven Window (11) Oven Lamp (11) (10)
How to Operate Before Operating Make sure the oven is connected to a properly earthed electrical outlet. When the door is closed, the display is still blank. When the door is opened, the display shows “0”. For the detailed operation, see the page on each feature. This oven is preset at the factory for the following: 1.
How to Operate Heating Open the door and place the food in the oven cavity. Close the door. “0” must be showing in the display window. A. Manual Single Stage Heating: This feature gives the user maximum flexibility to set the oven to desired heating time and power level. This is ideal for menus that require various heating requirements.
How to Operate C: Programmed Heating: Example: 1 stage; Memory Pad 9 to heat for 3 minutes at 1000 W • Press the Memory Pad 9. In Program Lock Mode the oven will start without pressing the Start Pad. (See page 16) •...
How to Operate Programming DO NOT OPEN THE DOOR The display window MUST be blank before programming. If any indicator light is illuminated in the digital display window: close the door, press the Stop/Reset Pad and wait 1 minute until the display goes blank. A.
How to Operate B. Programming Memory Pads for 2 or 3 Stages Heating: Example: To program for 2 minutes at 340 W for 2nd stage heating using Memory Pad 5 Complete steps 1 to 4 on page 13. • Program the 1st stage for 30 seconds at 500 W.
How to Operate C. Programming the Double Quantity Pad: Your oven is preset at the factory to automatically double the programmed time for double quantity heating. This model allows you to customize the heating time and/or power level for double quantity of your menu items.
How to Operate Other Features A. To Activate Program Lock: This procedure locks the Memory Pads into their programmed heating times and power levels. DO NOT OPEN THE DOOR. 1. The display window must be blank. • Press and hold in the Program Pad (for 5 seconds) until the display shows “P”...
How to Operate C. To Read Program List: Allows you to review all currently programmed pad number, heating time and power level for each stage. 1. Open the door. • While pressing the Stop/Reset Pad, press the Start Pad. The beep tone setting will be shown in the display window.
How to Operate D. To Select Beep Tone Options: The Beep Tone can be set, ON or OFF. 1. Open the door. • Press the Program Pad. The display will not change. • Press the Memory Pad 0. • Repeat pressing the Memory Pad 0. Select “OFF”...
Self Diagnostics Failure Code This oven monitors its operation and displays a Failure Code in the display window when a problem occurs. What to do when a failure code appears: CODE CAUSE WHAT TO DO * Overcooked food * Press Stop/Reset Pad to stop beep.
Cooking/Defrosting Guide The times given in the chart below are a guideline only. Many factors eg starting temperature of the food can affect the final heating time required. The cooking and defrosting times must be adjusted when necessary. All times are tested using foods at starting temperatures as below; Chilled foods .
Technical Specifications NE-1037 NE-1027 Power Source 230 - 240 V, 50 Hz, single phase Required Power 6.6 A 1490 W Output 1000 W * 1000 W * 500 W 500 W 340 W 340 W 100 W Frequency 2450 MHz...
Page 23
Matsushita Electric Industrial Co., Ltd. Central P.O.Box 288, Osaka 530-91, Japan A00033701BP F0297-0 Printed in Japan...