Panasonic AJ-PCD35 Brochure

Brochure

Hide thumbs Also See for AJ-PCD35:

Download this manual See also: Manual

AJ-PCD35

Memory Card Drive

A New P2 Drive for Windows or Mac Use That Improves

P2HD Workflow by Transferring Data at 1.0 Gbps or Higher*

Panasonic's AJ-PCD35 Memory Card Drive is a P2 drive with a PCI Express interface. It connects to a Windows PC

or Mac with the supplied board, and transfers data at a speedy 1.0 Gbps or higher*. It takes full advantage of the

P2 card's high-speed read/write performance, and dramatically speeds up workflow, particularly for HD production.

Five P2 card slots let you mount up to five cards simultaneously.

The AJ-PCD35 can be built into a 5-inch bay of a PC or used externally, and boasts exceptional reliability because

it has no transport mechanism and uses solid-state memory cards.

*The actual transfer rate varies depending on the file being transferred, the system, the applicaton software, the P2 card version and other

conditions. When a 4-GB or 8-GB P2 card is used, the maximum transfer rate is limited to about 800 Mbps.

Page 1 P2HD Workflow by Transferring Data at 1.0 Gbps or Higher* Panasonic’s AJ-PCD35 Memory Card Drive is a P2 drive with a PCI Express interface. It connects to a Windows PC or Mac with the supplied board, and transfers data at a speedy 1.0 Gbps or higher*. It takes full advantage of the P2 card’s high-speed read/write performance, and dramatically speeds up workflow, particularly for HD production.
Page 2 Cable/PCI Express Board *The shape of the plug supplied depends on the *The AJ-PCD35 cannot be installed into the 5-inch bay and used as an internal drive if the PC does not countries/regions. allow the PCI Express cable to be inserted into the slot that is intended for the PCI Express board. In this case, you will need to use the AJ-PCD35 as an external drive.