Page 2
Thank you for buying this Pioneer product. After you have finished reading the instructions, keep this man- ual in a safe place for future reference.
Page 5
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Page 36
You can use these functions only with a CD TEXT compatible multi-CD player.
Page 37
You can use these functions only with a multi- CD player that supports them. Switching the Ever Scroll...
Page 38
You can use this unit to control a TV tuner, which is sold separately.
Page 41
You can use this unit to control a DVD player or multi-DVD player, which is sold separately.
Page 43
Using ITS playlists Entering disc titles...
Page 44
You can use this unit to control a XM satellite di- gital tuner (GEX-P910XM), which is sold separately. Selecting the channel in the channel category...
Page 70
DEH-P80MP This product conforms to CEMA cord colors. Le code de couleur des câbles utilisé pour ce produit est conforme à CEMA. Printed in Thailand Imprimé en Thaïlande <CRD3847-A/N> UC <KSNZX> <04D00000>...
Connecting the Units <ENGLISH> Note: CAUTION: • This unit is for vehicles with a 12-volt battery and • When an external power amp is being used with The default output settings values for this unit are negative grounding. Before installing it in a recre- this system, be sure not to connect the blue/white 40W ×...
Page 72
Connecting the Units Power cable connection (1) When using this unit at 40W × 4ch. • When using this unit at 60W × 4ch and the accessory fuse for the vehicle is 10A or more. • 15 cm (5-7/8 in.) Antenna jack 15 cm (5-7/8 in.) Refer to Fig.
Page 73
Power cable connection (2) When using this unit at 60W × 4ch and the accessory fuse for the vehicle is less than 10A. • 15 cm Power supply wiring kit “RD-221” (sold separately) Antenna jack (5-7/8 in.) Refer to Fig. 5. Fuse (1A) 15 cm Jack for Wired Remote Control...
Page 74
Connecting the Units <ENGLISH> Connecting to separately sold power amp Power amp Front output (sold separately) (FRONT OUTPUT) Power amp (sold separately) Connecting cords Antenna jack Rear output with RCA pin plugs (REAR OUTPUT) (sold separately) Power amp 15 cm (sold separately) (5-7/8 in.) This product...
Page 75
Note: Installation without the rubber bush (Fig. 8) • Before finally installing the unit, connect the • If installation angle exceeds 60° from horizontal, Dashboard wiring temporarily, making sure it is all connected the unit might not give its optimum performance. Nut (5 mm) up properly, and the unit and the system work (Fig.
Page 76
DIN Rear-mount About the fixing screws for the front panel If you do not operate the Detaching and Replacing the Front Panel Function, use the supplied fixing screws and Installation using the screw holes on the side of the unit fix the front panel to this unit.