Table of Contents
Advertisement
Wired Network Projection
e
Select the Wired LAN menu and press [Enter].
f
Assign the IP settings for your network as necessary.
• If your network assigns addresses automatically, select IP Settings to set
the DHCP setting to On.
• If you must set addresses manually, select IP Settings to set the DHCP
setting to Off, and then enter the projector's IP Address, Subnet Mask,
and Gateway Address as necessary.
• If you want to connect the projector to the network using IPv6, select
IPv6 Settings to set the IPv6 setting to On, and then set the Auto
Configuration and Use Temporary Address settings as necessary.
To highlight the numbers you want from the displayed keyboard,
press the arrow buttons on the remote control. To select a
highlighted number, press [Enter].
g
To prevent the IP address from being displayed on the LAN standby
screen and Home screen, set the IP Address Display setting to Off.
h
When you finish selecting settings, select Complete and follow the on-
screen instructions to save your settings and exit the menus.
If no Web Control Password has been set, a screen prompting
you to set a password is displayed before you can save the settings.
Follow the on-screen instructions to set the password.
i
Press the [LAN] button on the remote control.
The wired network settings complete when you see the correct IP address
on the LAN standby screen.
94
- Quick Links:
- Easy Wireless Projection
Hide quick links:
Advertisement
Table of Contents
