Operating One Component While Using Another (Background Operation); Changing The Factory Setting Of A Function Button - Sony STR-DE915 Operating Instructions Manual
Hide thumbs
Also See for STR-DE915:
- Operating instructions manual (41 pages) ,
- Operating instructions manual (40 pages) ,
- Service manual (56 pages)
Table of Contents
Advertisement
Advanced Remote Operations
[EE
L|
Operating One Component
While Using Another
(background operation)
You can temporarily operate other components while
listening to or watching a program.
Numeric and
BACKGROUND
ENTER buttons
1
Hold down BACKGROUND.
2
Press both the corresponding button of the
component you're going to use (see the table
below) and one of the following, buttons at the
same time; VISUAL POWER, TV/ VIDEO, CH/
PRESET -*/-, ANT TV/VTR, D.SKIP, Вэ, -я4, E,
<4 / PP, 144 / P»1 11, Ө.
Example:
To start recording on a tape deck
while listening to a CD
:
While holding down BACKGROUND,
~
press 4 (or 5) and press 6 + We at the
same time.
The following buttons correspond to the
components.
The button
Corresponds to
1
CD player
2
DAT deck
3
MD deck
4
Tape' deck A
5
Tape deck B
6
LD player
~-
7
VCR (remote control mode VTR 1*)
8
VCR (remote control mode VTR 2*)
9
VCR (remote control mode VTR 3%
>10
DBS tuner
ENTER
DVD player
* Sony VCRs are operated with a VTR 1, 2 or 3 setting
that corresponds to Beta, 8mm, and VHS,
respectively.
а
А
а
Changing the Factory Setting
of a FUNCTION Button
If the factory settings of the FUNCTION buttons (page
13) don't match your system components, you can
change them. For example, if you connect a Sony LD
player to the VIDEO 2 jacks, you can assign the VIDEO
2 button to set the remote to control the LD player.
Note that the settings of the TUNER and PHONO
buttons cannot be changed.
SYSTEM
CONTROL/
FUNCTION
Numeric
and ENTER
buttons
1
Hold down the SYSTEM CONTROL / FUNCTION
button whose function you want to change
(VIDEO 2, for example).
2
Press the corresponding numeric button of the
component you want to assign to the SYSTEM
CONTROL/ FUNCTION button (6 - LD player,
for example).
For the numeric buttons, see the table in
"Operating One Component While Using
Another" on this page.
Now you can use the VIDEO 2 button to control
your Sony LD player.
-
To reset the setting to the factery setting
Repeat the above procedure.
29
Advertisement
Table of Contents
