Dolby Pro Logic (Str-De715 /De615 / D660Z/D560Z Only) - Sony STR-DE915 Operating Instructions Manual
Hide thumbs
Also See for STR-DE915:
- Operating instructions manual (41 pages) ,
- Operating instructions manual (40 pages) ,
- Service manual (56 pages)
Table of Contents
Advertisement
20
Dolby Surround Setup
Adjusting the speaker volume [T]
Use the remote while seated in your listening position
to adjust the volume of each speaker.
Note
This receiver incorporates a new test tone with a frequency
centered at 800 Hz for easier speaker yolume adjustment.
z
GENRE
SOUND FIELD
TEST TONE
ON/OFF
MODE
DPC MODE
DIGITAL
PROCESSING
CONTROL
1
Press SOUND FIELD ON/OFF to turn on the
sound field.
2 Press GENRE repeatedly to select "DOLBY."
3
Press MODE to select "NORMAL SURROUND"
or "ENHANCED SURROUND."
4
Press DPC MODE repeatedly until the SUR
indicator lights up.
5 Press TEST TONE.
You will hear the test tone (see page 22) from each
speaker in sequence.
6
From your listening position, use the digital
processing control buttons (A / М) to select the
parameter to be set and use the buttons (< / >)
to select the setting so that the test tone can be
heard at the same level from all speakers:
To adjust
Select
And set between
rear speaker
REARLR
L (left) and R (right)
balance
rear speaker
REAR
-20.0dB and +10.0dB
level
(in 0.5 dB steps)
center speaker
CENTER
—20.0dB and +10.0dB
level
(in 0.5 dB steps)
subwoofer
SUB WOOFER -20.0dB and +10.0dB
level
(in 0.5 dB steps)
During adjustment of the respective speaker level /
balance, the test tone is output from the speaker(s)
only.
After adjusting the subwoofer level, the test tone
turns off automatically.
To turn off the test tone'
Press TEST TONE.
Notes
Be sure to select "NORMAL SURROUND" or
"ENHANCED SURROUND" before outputting the test
tone.
The test tone is not output when:
— "MUTING" appears in the display.
Dolby Pro Logic (STR-DE715/
0Е615/06602/05602 only)
To obtain the best possible Dolby Pro Logic Surround
sound, first select the center mode according to your
speaker system. Then, adjust the sound parameters of
the PRO LOGIC sound field.
Note that you must have at least one additional pair of
speakers and/or one center speaker to do the following
adjustments. -
Digital processing
control buttons
SET UP
=
5
E
$ ‹
с
BALANCE
TEST TONE
REAR
CENTER
~ LEVEL 47—
LEVEL +/—
Advertisement
Table of Contents
