Connecting The Lan Cable; Disconnecting The Lan Cable - Toshiba Portege A600-S2201 User Manual
Toshiba portege a600-s2201: user guide
Hide thumbs
Also See for Portege A600-S2201:
- User manual (243 pages) ,
- Brochure (2 pages) ,
- Maintenance manual (262 pages)
Table of Contents
Advertisement
Connecting the LAN cable
To connect the LAN cable, follow the steps as detailed below:
■
Connect the AC adaptor before connecting the LAN cable. The AC
adaptor must remain connected during LAN use. If you disconnect the
AC Adaptor while the computer is accessing a LAN, the system may
hang up.
■
Do not connect any other cable to the LAN jack except the LAN cable.
Otherwise, malfunctions or damage may occur.
■
Do not connect any power supplying device to the LAN cable that is
connected to the LAN jack. Otherwise, malfunctions or damage may
occur.
1. Turn off the power to the computer and to all external devices
connected to the computer.
2. Plug one end of the cable into the LAN jack. Press gently until you hear
the latch click into place.
3. Plug the other end of the cable into a LAN hub connector or router.
Check with your LAN administrator and hardware or software vendor
before using or configuring a network connection.
Disconnecting the LAN cable
To disconnect the LAN cable, follow the steps as detailed below:
1. Pinch the lever on the connector in the computer's LAN jack and pull
out the connector.
2. Disconnect the cable from the LAN hub or router in the same manner.
Check with your LAN administrator and hardware or software vendor
before disconnecting from the hub.
User's Manual
Connecting the LAN cable (PORTÉGÉ R600)
Operating Basics
LAN jack
LAN cable
4-41
Advertisement
Chapters
Table of Contents
